LaSalle Bristol Street Elbow Fitting for RV Sewer System - ABS Plastic - 45 Degree - 1-1/2"

Video Transcript for Review of LaSalle Bristol RV Sewer - Connectors and Fittings - 344632401

Michael: Hi there. I'm Michael, with etrailer.com. Today, we're going to take a quick look at the LaSalle Bristol street elbow fitting for your RV sewer system. This elbow is going to connect to sewer pipes that move your waste outside of your RV or motor home. It's going to allow you to change the direction of that waste flow. You can see this is a 45 degree angle.

So it's going to allow you to make that 45 degree angle change. This is going to work with an inch and a half inch diameter pipes. So you can see this end has a little bit of a flare to it. That's going to allow your one and a half inch diameter pipes to fit inside there. The other end is a one and a half inch diameter end so you will need a similar flare to get that connected to connect these.It is a good idea to pick up some abs solvent cement, to make sure that all your connections are going to be nice and sealed.

So you don't have to worry about any leaks or anything like that, because this is an abs plastic construction. That abs solvent cement, you're just going to apply it on the inside of your connection. And it's going to adhere to that abs surface and it's going to make a nice tight seal.It's going to work very well for you. You won't have to worry about it breaking down or anything like that because it is an abs plastic construction. It is going to be very durable, hold up well for you and make sure you're not going to have to worry about your pipes rusting or anything like that.

It's going to hold up well and do a good job, getting that waste where it needs to be. So that's going to complete our look at the LaSalle Bristol street elbow fitting for your RV sewer system. Again, I'm Michael, with etrailer.com. Thanks for watching..