Can Old Cable be Used for 1-1/2" Waste Valve System

Question

Question:

Where is the grey tank cable measured from? My cable seems to be 132" for the entire set-up. Can I just order the 1.5 vavle and use my existing cable?

asked by: Joey

0

Expert Reply:

Potentially - it just depends on how your current valve is connected to the cable as well as what brand waste valve you have.

For example, the Valterra Waste Valve for RV Gray Water Tank - 1-1/2" Diameter - Spigot to Hub # T1001NH has a connection that screws into place while the Valterra Waste Valve Body # TC172 has a different connection to the cable and it's a replacement for a Valterra waste valve system.

Let me know what you have and I'll be happy to see if we have the correct replacement for you!

expert reply by: Jon G

0

Answer 1

The anti-rattle hitch lock you referenced, part #SHP2040-XL does not carry a weight rating, but it is only compatible with ball mounts that have hollow shanks. Ball mounts with hollow shanks usually have a maximum capacity of 7500 lbs, so 7500 lbs…

view full answer...

Answer 2

When installing/adjusting the Solera RV Slide-Out Awning #LCV000163285 tension is applied by rotating the awning roller 14 times. This should apply the needed spring tension so that the fabric doesn't billow in the wind or leave enough slack that…

view full answer...

Answer 3

Hey Wyatt, so we have a hose that was designed to be used with the #T01-0091VP with the part #W01-4180 which does have a different thread size. This is intentional so that someone doesn't use a standard garden hose that someone might attempt to…

view full answer...

Answer 4

Hey Gene, we don't have that exact one you're looking for but we do have the Vitrifrigo C85i RV Mini Fridge with Built-In Freezer #VT34FR which is 3.2 cubic feet, runs off of 12V power, and does include a built in freezer.

view full answer...

Answer 5

Hey Lamar, The Demco Autoslide 5th Wheel Hitch w/ Slider #DM69GV has side plates with attachment points that will drop right into your Ram's puck system an without the need of any other kind of adapters or rails. The only thing you might need…

view full answer...

Answer 6

You'll have to look at the way the pipe connects to your RV plumbing to determine if the valve slips over the piping or into it or if it screws in. It should be obvious under closer inspection. We have screw in options like the part #T1001D for…

view full answer...

Answer 7

Everything I have found on the 2015 Chevy Sonics with automatic transmissions is that they are flat-towable as-is. First you would need to start with a base plate kit. For that you would want the part #RM-523173-5 which is a confirmed fit. I attached…

view full answer...

Answer 8

The correct spigot flange for the Valterra Bladex Waste Valve Body for RV Gray Water Tank part #T1001VP is the Valterra RV Sewer Spigot with Flange part #T1006-1.

view full answer...

Answer 9

I went out to the warehouse to measure Valterra RV Sewer Spigot with Flange - 1-1/2" Item #T1006-1 for you. The holes are spaced 2-7/16 inches apart on center up and down and side to side. Diagonally they are space 3-7/16 inches apart on center.…

view full answer...

Answer 10

We carry a broad range of Ventline products, complete vent assemblies as well as individual replacement parts, for both of the part numbers you referenced. For Ventline item V2092 we offer complete vent assemblies, #V2092SP-29 in smoke color and…

view full answer...

Answer 11

For just a 14 inch roof vent the part #V2092SP-29 would be a great option. This will fit a 1-1/2 inch thick roof if you get the garnish part #VA0445-25 or trim down the included one. For a model that includes a 12 volt fan you would want the part…

view full answer...

Answer 12

We do have the replacement rubber trivet support bumpers for the Furrion stove #FGH4ZSASS that you referenced as part #CFGH4ZSASSTRIVETSPRT.

view full answer...

Can Old Cable be Used for 1-1/2" Waste Valve System

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching