Recommended Fan-Tastic Roof Vent Cover and Lid for Power Lift Vent on 2018 Forest River Cedar Creek

Question

Question:

I have a fantastic roof vent fan model 6300 on my 2018 cedar creek 33IK silverback fifth wheel. I am interested in getting a cover for it, but I cant find any information indicating if it is an fa, fv, or df. I looked under the the screen on the fan and all it showed was model 6300. I am also concerned about the cover not being tall enough to let the lid on the fan fully extend and thus possibly causing issues with the motor. Thank you for your time regarding this matter.

asked by: Ronnie P

0

Expert Reply:

If you are looking for the replacement lid, then you will need the Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted # FVK1020-19 or white # FVK1020-81 but it sounds like you are seeing the larger cover. To get the cover that allows the full extension of the lid, I recommend the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25" - Smoke Item # FVU1500GR.

expert reply by: Jason S

0

Answer 1

Yes, either the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-81 or the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts #FVK6010-80 will work great as a…

view full answer...

Answer 2

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better…

view full answer...

Answer 3

While we currently do not have the Nova style of slam latches we do offer a more generic looking style with the Global Link RV Baggage Door Slam Latch with Keyed Alike Option #295-000015 along with the backing plate #295-000016. This slam latch…

view full answer...

Answer 4

Fan-Tastic vents do not have replacement circuit boards for their RV roof vents, and the FV6300 is no longer available, so the best we can offer is a new roof vent since yours is acting up. I recommend going with an option that does have available…

view full answer...

Answer 5

The motor you need is the Replacement 17-rpm Lift Motor for Fan-Tastic Vent B Series Roof Vents with Powered Lifts - White #FVK6010-81 or off-white #FVK6010-80. If you need the lift arm assembly then you will also want #FVK8011-05. I've attached…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Recommended Fan-Tastic Roof Vent Cover and Lid for Power Lift Vent on 2018 Forest River Cedar Creek

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching