Recommended Vent Cover For MaxxAir MaxxFan To Allow Travel Speeds With Open Vent

Question

Question:

are there any speed restriction with fan full up on highway speeds

asked by: John

0

Expert Reply:

There are no posted speed restrictions on this MaxxAir MaxxFan - White, # MA00A04301K, so I called the manufacturer to see if they have recommendations. Their tech said they don't test those lids to see what speeds they can handle, but it is likely that highway speeds with a crosswind could rip the lid off the unit.

If you want to protect your vent for travel and from rain to allow that vent to be open, you will want the # MA76JR or the # FVU1500WH roof vent cover.

expert reply by: Jason S

0

Answer 1

Good morning, Don. The 3/4" wide butyl tape is exactly what we recommend for installing a roof vent such as the MaxxFan #MA00-07000K. We actually sell a roof vent install kit part #344270KITW that comes with sealant, screws and a 30' roll of…

view full answer...

Answer 2

Hey Jim, yeah the MaxxFan roof vent part #MA00-04002K would do a great job as a bathroom fan unlike what you have now as it can move a lot of air.

view full answer...

Answer 3

Sure thing! The MaxxFan Roof Vent w/ 12V Fan #MA00A04301K is actually exhaust only. However, if you're wanting the exhaust & intake version, then you'll want the: -MaxxFan Plus Roof Vent w/ 12V Fan and Thermostat #MA00-04000K.

view full answer...

Answer 4

If the vent fan you have now is reversible then there should be a button on the assembly next to the other controls. However, if the fan is not reversible then all you need to do is reverse the wires on the motor (not the circuit board) and that will…

view full answer...

Answer 5

The Ultra-Fab T-Slot Power Drill Adapter for Scissor Jacks #UF48-979071 will have a slot that is 1/4 inch wide and although not intended for your topwind trailer jack could maybe work. I've attached a picture that has several dimensions for you…

view full answer...

Answer 6

Our customers have told us that the #LG-119226 Replacement Crank Handle works with most Atwood landing gear. I've linked to a product description video featuring the replacement handle. I've also provided a close-up photo showing what the end…

view full answer...

Answer 7

Hi Christopher, There unfortunately isn't a guide to tell us the exact part numbers for the vents, skylights, etc. on your Passport. We offer a variety of plumbing vents and 12v fan vents but we unfortunately do not offer skylights. If you want…

view full answer...