Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
(127 reviews)
Price: $11.67
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (127)
- Q & A (0)
- Videos (2)
- Photos
Draw-Tite Hitch Pins and Clips - PC2
- Fits 1-1/4 Inch Hitch
- Standard Hitch Pin
- 1/2 Inch Diameter
- Draw-Tite
This grooved, 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.
Features:
- Hitch pin secures ball mount or other hitch-mounted accessory in your trailer hitch receiver
- Grooved end enables easy installation and removal of included clip
- Sturdy steel construction
- Corrosion-resistant zinc-plated finish
Specs:
- Application: 1-1/4" x 1-1/4" trailer hitch receivers
- Pin diameter: 1/2"
- 1-Year limited warranty
4666 Draw-Tite Class I and II Pin and Clip - 1/2" Diameter - Zinc
63241 Alternate
California residents: click here
Video of Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Draw-Tite Class I and II Pin and Clip Review
Today we're going to be taking a look at the Draw-Tite Pin and Clip for Class 1 and 2 trailer hitch receivers, Part Number PC2. This half inch diameter pin and clip is going to fit your inch and a quarter by inch a quarter square receiver tubes. It's 4" long and features a pistol grip style handle, that way you can easily install it and remove it. It also keeps it from sliding all the way through. It's going to work out great for ball mounts, hitch cargo carriers, bike racks, or any other hitch mounted accessories. It's got a zinc plating that's going to help it resist rust and corrosion.
Let's see what it looks like going down the road. That's going to complete our look at the Draw-Tite Pin and Clip for Class 1 and 2 trailer hitches, Part Number PC2.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Arrived Damaged
Customer Reviews
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter - PC2
Average Customer Rating: 4.8 out of 5 stars (127 Customer Reviews)
This grooved, 1/2" diameter pin fits 1-1/4" square receiver hitches. Includes retaining clip. Zinc finish resists corrosion.by: David10/08/2019
The hitch adapter and 90 degree mount solved my desire to mount my electric wench on my auto trailer replacing the manual wench. See photo.
The 2" sleeve would not come out of the existing 2" receiver so I used the hitch adapter to make the transition. The etrailer experts correctly told me there would be some play in this joint. However, it works here (as this is not for towing).
I also used the 90 degree mount upside down (also not an approved application). But again no towing is involved. I did need to drill a new hole in the receiver.
by: David Q.09/15/2016
Pin and Clip For Class I and II Trailer Hitch Receiver Hitch - PC2 is the quake and safe easiest way to connect your trailer hitch to your vecicle.
by: Don F.08/17/2017
All the parts ordered are of great quality and fit properly. Packaging needs work. The original box was ripped open and had been taped back together by the shipper(UPS). The hitch was still secure but the tow bar was loose and the pin and clip were missing. etrailer sent another pin and clip.
In the future possibly adding some fiber tape would lessen the chance of boxes being mangled.
by: Frederick10/28/2017
Hitch looks good, Haven't used it yet but am sure it will be fine. However, I ordered 2 different sizes of pins. Was supposed to get 1 small pin (1/2") for the 1-1/4"x 1-1/4" part of the hitch and 1 large (5/8") pin for the 2"x 2" part of the hitch. What I got were 2 large (5/8") pins.
by: Marta D. 10/24/2019
Good quality, but it turns out its too big for the cargo basket and 1 1/4 trailer hitch I had installed.
by: Noel12/29/2021
We just wanted to tell you how much we appreciated your customer service. We were called Sunday evening, the day after Christmas, and told that the clip my husband had ordered wouldn't work with the other parts.
#1 We were surprised that anyone would be working the day after Christmas on a Sunday evening.
#2 A real person was looking at the order and realized the components ordered wouldn't work together.
#3 The real person called and corrected the ordered parts.
In these days of having to work our way through phone keyboard selections and live chat with computers, it was refreshing to have an actual person catch the problem ahead of sending us an unworkable element, calling us about it, and correcting the problem. We're leaving for FL for the winter on Friday and are planning on taking our bikes. The wrong part would have made our hitch unusable, thus forcing us to leave the bikes at home. With no time to order and receive the correct part, your employee helped to make our winter more enjoyable. Thank you so much.
by: Bruce M.09/14/2014
I have bought two trailer hitches and a cargo carrier. And, have been extremely pleased with all three. They are easy to install and high quality products.
by: Scott S.08/02/2014
It worked great. Leveled out the trailer perfect. Thanks again for your help, good product, and prompt delivery.
Scott S.
8/4/2015
great
by: Simple08/07/2017
Okay so instillation was quite simple once I got the wires ran. So I had to remove the rear bumper for instillation of the wires. In the video it made it seem that it would be a quick instillation. 4-5 hours I spent intotal to install. It was about 3 hours with removal of the rear cover. It was so much easier taking off the bumper then trying to feed it like they showed.
by: Dennis03/13/2020
Just what I needed to use my 2 inch bike rack on my 1&1/4 inch hitch.Very impressed with the heavy duty makeup of the product. I,m sure it will last longer than I will.
by: Carl08/19/2021
Clip interferes with safety chain hooks. Different size clips should be provided.
by: Joan M09/05/2017
I received the order within two days. My son installed the Hitch this past weekend with no problems.
Your service was excellent and your sales person was wonderful. He guided me through what I was looking for and answered all my questions with patience.
by: Mark Walters02/13/2015
The price was reasonable, the product was, as advertised and the delivery time was incredible. I ordered it on Monday and had it delivered on Wednesday. The cargo carrier had eleven bolts! It took me no time at all to assemble it. Great service, product and price. I am totally satisfied!
by: Tami P.05/14/2012
Everything I needed all the way down to the clips and cost effective. 52 yr. old grandma, and I was able to install it myself. Video on installation was helpful and gave me confidence to attempt the job myself.Instructions were very user friendly. etrailer.com all the way.
Thanks guys!
by: Bob02/24/2019
The retaining pin fits a Class I hitch, as promised, although the clip looks delicate.
The clip will be easy to take on and off, but I wish that there were a more secure type so I didn't have to worry about it on the road.
by: Sal10/28/2014
It's a pin! nothing too crazy has been doing the job for a light duty trailer no problem. I did manage to bend the end of the pin on my first one somehow but I think it was due to a drop/getting stepped on etc. Still functions well
by: Rob S.09/22/2013
It is a great product , only one thing i would change is to make the pin sold with a hole so the clip would go threw the pin in case the chains snag the clip.
by: John McK05/27/2012
Good price. Bought an extra one since I didn't know it was already included in the trailer hitch purchase. Not sure if I just missed it in the description or it wasn't mentioned. Overall very happy with purchase and delivery speed.
by: Dale 08/09/2018
It's a hitch pin...not alot to say about it. It works. eTrailer is a great source for all of your trailering needs. I've ordered before and will again!
by: Allison11/16/2017
Looks good so far. It’s a Christmas gift so won’t put it together til then but looks nice. It was recommended as one that will fit our odd size hitch receiver so hope it works.
by: John12/03/2016
The whole reason you shop at etrailer in the first place - great selection, fair price and prompt shipping. It really couldn't be any easier.
by: Jim M03/27/2017
I used this pin to install a 1,5 inch to 2 inch receiver adaptor. Appears to be good quality, didn't rattle and fit snugly.
by: Allen W.08/18/2016
Well made hitch pin.This is the second time I have bought from etrailer.com. both experiences were great.Their service is second to none.
by: Michael09/17/2018
Product fits fine, looks to be of good quality and shipped quickly. My go-to shop for hitch needs
25
127
Show More Reviews
See what our Experts say about this Draw-Tite Hitch Pins and Clips
- Trailer Hitch for Carrying Mobility Scooter with 2014 Chevy MalibuBecause the 2014 Chevy Malibu uses a Class II hitch like the Curt # C12115 that has a 1-1/4 inch receiver opening, it wouldn't be a good vehicle to carry a mobility scooter with, unless you can find one that's compatible with a 1-1/4 inch hitch. Unfortunately, all the scooter carriers we offer are only compatible with a 2 inch receiver. The best solution I could offer would be a small trailer like # K2MMT4X6. To equip your Malibu for towing, in addition to the hitch you'll also need a...
view full answer... - Trailer Hitch Fit for 2014 Subaru Impreza 5-Door HatchbackAs long as your 2014 Subaru Impreza isn't a WRX or WRX STi model (and it sounds like it isn't), the Curt # C11286 is the correct fit. If you DO have the WRX or WRX STi, you'd then need the # C11120. If you'll be doing some light duty towing, you'll also need the # 118573 for the non-WRX models or # 119250KIT for the WRX and WRX STi. You'll also need the # C45521 ball mount, the # PC2 hitch pin and for a trailer ball, part # A-80 for a 1-7/8 ball or # A-82 for a 2 inch ball.
view full answer... - Replacement Mounting Bolts for a Hitch on a 2009 Chevy ImpalaA replacement installation hardware kit can be ordered on our site by using item # RHK and putting in the manufacturer and part number of the hitch in the spaces provided. Some items you may also need with this Class II hitch are listed below. Drawbar # 36061 Hitch Ball # 19256 or # 19258 Hitch Lock # e98879 Pin and Clip # PC2
view full answer... - Trailer Hitch Recommendation for a 2010 Ford Fusion Sport with Dual ExhaustYes, the Draw-Tite Trailer Hitch, # 24865, will fit on all models of the 2010 Ford Fusion including the sport with dual exhaust. This hitch installs exactly the same as Hidden Hitch Trailer Hitch, 60282, which has been discontinued, and we have pictures and a video of it installed on a 2010 Fusion with dual exhaust. I have provided a link to the video for reference. The recommended ball mount but for the Draw-Tite Hitch is # 3594. For a ball you can use # 19256 (1-7/8 inch diameter)...
view full answer... - Is the Draw-Tite Trailer Hitch for a 2003 Dodge Grand Caravan Strong Enough to Tow Utility TrailerIt really just depends on the weight of the trailer. The Draw-Tite Trailer Hitch Receiver # 36296 that you referenced has towing capacities of 3,500 gross trailer weight and 300 lbs tongue weight. You will need to know the gross trailer weight and tongue weight of the trailer you plan on towing and as long as it does not exceed the capacities of the # 36296 and the towing capacities that are listed in the owners manual of your 2003 Dodge Grand Caravan you would be good. I attached an installation...
view full answer... - Hitch Extender for Curt Trailer Hitch on a 2006 Mini Cooper S R53For your application we have the 6" Brophy Extension # HES6 or the 10" Brophy Extension # HES0. These will move the hitch pin hole of the Curt Trailer Hitch # C11126 on your 2006 Mini Copper further out to make it easier to install your bike rack. I do recommend using an anti-rattle device like the Quiet Hitch # RM-061-125 to help reduce any play in the hitch receiver. You can then use a pin and clip # PC2 or a locking hitch pin # e98879 to secure and leave the extension installed on your...
view full answer...
- Trailer Hitch Recommendation for 2015 Kia SoulThe Draw-Tite Sportframe Trailer Hitch Receiver, # 24915, that you mentioned, will work great for your 2015 Kia Soul. It will provide you with a 1-1/4 inch trailer hitch receiver that has a gross towing capacity of 2,000 pounds and a tongue weight capacity of 200 pounds. If you plan on doing any towing you will also need wiring, # C56220 for models with LED taillights and # C56222 for models without. For a ball mount you can use # C45521, pin and clip # PC2, and a properly sized ball....
view full answer... - Which Euro-Style Ballmount for Draw-Tite 24890 Installed on 2016 Dodge DartThe Curt Euro Style Ball Mount, part # C45571 will work just fine in a Class I hitch like the Draw-Tite # 24890 that you'd looked at. Since you'll be towing, you'll also want to pick up a trailer wiring harness, part # C56179 and a hitch pin like # PC2. I'll link you to an installation video for the hitch.
view full answer... - Can Hitch Pin for Class III Hitch Be Used in Class I or II HitchYou cannot. A Class I or II hitch needs a 1/2 inch diameter hitch pin, while a Class III hitch uses a 5/8 inch diameter pin. For a 1/2 inch hitch pin, use # PC2. A locking version would be part # e98879.
view full answer... - What is the Correct Hitch Pin Size for a 16 Foot TrailerThe hitch pin you need is going to depend on which size receiver you have on your hitch. More than likely you have a 2" receiver, which means you want a 5/8" diameter hitch pin like the Curt Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span # C21510. Just to be clear, the cotter pin is the smaller pin that comes with the hitch pin in order to secure it. If you're looking for a ball mount and have a 2" receiver, I recommend the etrailer Ball Mount Kit - 3/4" Rise or...
view full answer... - Hitch Fit for 2007 Honda Element SCIf you're wanting a Class I hitch with a 1-1/4 inch receiver, you'll want to go with the Curt # C11699 for a 2007 Honda Element SC, as the # C11700 isn't a fit for the SC model. This being said, I'd recommend going with a Class III hitch with the 2-inch receiver opening, like part # e78KR. The 2-inch receiver is much more common, and there are a lot more available accessory options for the 2-inch receiver such as cargo carriers or bike racks. The price differential between the 1-1/4 inch...
view full answer... - Best Trailer Hitch Receiver for 2015 Subaru Impreza HatchbackWe carry one 2 inch trailer hitch receiver to fit your 2015 Subaru Impreza, the EcoHitch, part # 306-X7211. However, it only fits if your vehicle has the knock out panel on the rear bumper. If your Impreza doesn't have a knock out panel then you're going to need a 1-1/4 inch hitch which I suggest the Draw-Tite Sportframe Class I # DT24959 since you have the hatchback and not a sedan. This way you will not need the support straps like is necessary with the Curt. An option to use the...
view full answer... - Availability of Hitch Pin For 2 Inch Trailer Hitch ReceiverThe two sizes of hitch pins that I carry are 1/2 inch and 5/8 inch. A 2 inch hitch receiver will use the 5/8 inch hitch pin like the Hidden Hitch Pin and Clip, part # PC3. I am including a link to a page of the 5/8 inch hitch pins that I carry. The Class I 1-1/4 inch hitch receivers will use the 1/2 inch hitch pin like the Draw-Tite Pin and Clip, part # PC2. The Softride Replacement Hitch Bolt with Lock Washer, part # SR25879, that you have referenced will only fit the QuietRide stainless...
view full answer... - Is Drilling or Modification Needed to Install Draw-Tite Trailer Hitch # C11109, 2000 Chevy CavalierTo install the Curt Trailer Hitch, # C11109, to your 2000 Chevy Cavalier, you will need to temporarily lower the exhaust to get the hitch into position but then put it back after the hitch is installed. The only drilling that may be required is to enlarge some existing holes needed for installation. It will also require you to trim the heat shield. I have included a link to the installation details for reference. If you plan on doing some towing, the recommended ball mount is # C45519...
view full answer... - How Can I Get the Most Towing Capacity Out of a 2018 Chevy MalibuI looked at the owner's manual for your 2018 Chevrolet Malibu and it states that the trailer should never be heavier than 1,000 pounds. It goes into more detail that other factors can influence the capacity (such as speed, altitude, temperature, and others) and that you should contact GM for specific information. Long story short the absolute maximum capacity of your Malibu is no more than 1,000 pounds for sure. With that being said, we do have the parts you need to get the Malibu set...
view full answer...
- Hitch Needed for 2015 Honda Accord to Carry Bike Rack with 2" ShankThe hitch receivers available for your 2015 Honda Accord are all Class I with a 1-1/4 inch receiver opening like the Custom Fit Curt Hitch, # C11681. Curt does require the use of Support Straps, # 18050, for all non-trailer loads including bike racks, cargo carriers and so forth. Failure to properly support these loads will void your hitch warranty from Curt. In order to mount a bike rack designed for use with a 2 inch hitch in the Class I hitch, you could use a hitch adapter like the...
view full answer... - Trailer Wiring Harness Recommended for 2016 Toyota PriusWe do indeed offer a trailer wiring harness for your 2016 Toyota Prius. I'd recommend the Curt # C56353. For a hitch, the Curt Class I hitch you'd already looked at, part # C11473 is a confirmed fit. You'll also need a # C45521 ball mount, a # PC2 hitch pin and a trailer ball. For a 1-7/8 inch ball, use # A-80 or for a 2 inch ball use # A-82. I've linked to install videos for the hitch and the trailer wiring harness mentioned above.
view full answer... - Trailer Hitch Available for 2016 Kia Forte HatchbackWe do indeed offer a hitch for the 2016 Kia Forte Hatchback (A/K/A Kia Forte5). You'll need part # C11395. If you'll be doing some light duty towing with the hitch, you'll also need the # C39KR trailer wiring harness, a # C45521 ball mount, a # PC2 hitch pin and a # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball.
view full answer...
- Will the Draw-Tite # 36416 Fit on a 2011 Toyota Camry SE with Dual ExhaustThe Draw-Tite Trailer Hitch, # 36416, will fit on a 2011Toyota Camry with dual exhaust. Take a look at the photo I added for you. You can see that the design of the hitch leaves enough room for the exhaust on both sides of the vehicle. I have also linked instructions and a video for you. At this time there is not a hitch available for the 2011 Toyota Camry SE that does not require bolting to the underside of the spare tire well. If you plan on doing some towing the correct ball mount...
view full answer...
- Will Draw-Tite Trailer Hitch # 36540 Fit a 2012 Toyota Camry SE and Can the Car be Used for TowingFirst, if the owners manual states that you cannot tow with the vehicle, then I cannot recommend going against that. If the owners manual is unclear, you will need to contact your Toyota dealer or Toyota directly to determine if the car can be used for towing and, if so, what the capacity is. The Draw-Tite trailer hitch, # 36540, is listed as a fit for all models of the 2012 Toyota Camry, including the SE. It also fits hybrid models. I have included a link to the installation instructions...
view full answer... - Will the Curt Class II Trailer Hitch # C12225 Fit a 2012 Ford FusionI have a hitch solution for your vehicle, but the Curt Class II Trailer Hitch, # C12225, will not fit your 2012 Ford Fusion. Instead, you will want to get the Draw-Tite Sportframe Class I Trailer Hitch, # 24865. We have installed this trailer hitch on a 2012 Ford Fusion so I linked the video and installation instructions for you to check out. If you are looking to do some light towing with your vehicle, then you will also want the T-One Wiring Harness, # 118422, ball mount, # 3594, 1-7/8...
view full answer... - Hitch Needed for 1995 Nissan MaximaThe hitch you referenced, the Draw-Tite Class I Receiver, part # 24796 fits the 2009-2011 Maxima or the 2007-2011 Altima only. For your 1995 Maxima, I would recommend the Curt Class I, part # C11255. The Curt receiver attaches, as it uses two additional attachment points to the bumper structure. If you are planning on towing a trailer, you will also need the trailer wiring harness, part # 119178KIT, a ball mount part # 3593, a pin and clip part # PC2, and the appropriate sized trailer...
view full answer... - Trailer Wiring Harness for 2012 Honda CivicTo install a trailer wiring harness on your 2012 Honda Civic, all you'll need is the Tekonsha # 118420. You won't need the # 55151 wiring kit, as the # 118420 draws all the power it needs through the vehicle's taillight circuits. The Curt # C11391 hitch you'd looked at is a confirmed fit for your vehicle. You'll also need a ball mount like # 3593, a # PC2 hitch pin and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball. I've linked to some installation videos you might find helpful.
view full answer... - Blank Hitch Cover for Own Logo for 1-1/4 Inch Trailer Hitch Receiver OpeningThe Blank Trailer Hitch Cover for 1-1/4" Trailer Hitches # AUT2-BNK-C allows you to add you own logo to the 3 inch diameter face. It does not come with a pin and clip to secure it, so I recommend the # PC2.
view full answer...
Do you have a question about this Hitch Pins and Clip?
Info for this part was:
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Jacob T
Video by:
Dustin K
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David Q.
9/15/2017
The pin and clip make installing the hitch easy and safe to use.The pin and clip make installing the hitch easy and safe to use.