Can Erickson Mini E-Track Plate be Used as Tie-Down for UTV or ATV  

Typically it depends on the application, but for a heavy application we might suggest going with every other mounting hole, but on a lighter duty setup with a stronger wood that the tracks are attached to you can skip more than that. You could…

The mounting holes on the E-Track such as #E19148 are 1/4 inch in diameter. The type and length fastener you use will depend on the surface material and thickness you are attaching it to. For example if your surface was ACQ treated wood you could…

The E-Track has slots that have a length of 2.45-inches and a width of .58 inches. See attached diagram. I couldn't find any information on the ANCOR brand so you would need to compare what you have to those dimensions to know if the…

If you didn't want to drill down into the frame of your trailer you could use short wood screws to attach to just the plywood floor. I would recommend using a screw in every hole though for the #EM19147.

If it were my trailer I would fasten the E-Track to the support beams under the trailer, either the side to side one or front to back ones, by going all the way through those support beams. E-Track like #E19148 is zinc-coated steel and since the…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.