Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor has a zinc finish to resist corrosion. Bolt on wherever you need a strap-down point. Hardware sold separately.
Features:
Specs:
Great for contractors, movers, motorcyclists and anyone who tows. The Snap-Loc bolt-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies. Just bolt the anchor onto any smooth surface in your trailer, truck or garage, and it's ready whenever you need to tie down a load. Put the anchor on your trailer floor and you can strap pallets directly to it, or attach an anchor to your trailer wall to provide a strap-down point. Mount the Snap-Loc anchor to the ceiling so you can secure ladders or other long loads above the cargo that's on the floor.
Snap-Loc anchors have a square-hole design that allows for easy one-person installation using Snap-Loc carriage bolt hardware (sold separately). There's no need for another person to hold the bolt to keep it from spinning as you install the nut. The square-shaped underside of the carriage bolt fits snugly into the square hole of the Snap-Loc, which prevents the bolt from turning. This makes it much easier to install in a trailer wall or floor.
E Track accessories, such as cargo straps (sold separately), snap securely into the anchor slot using a spring-loaded mechanism. Just pull back on the E Track attachment's lever, put the end into the slot, and then release the lever.
Use the anchor with a Snap-Loc Loc-Ring (sold separately) to tie down equipment or large loads, secure your camping supplies, or trailer a motorcycle.
The Snap-Loc has a low profile, so it fits in places that other anchors don't - even on the side of your open tailgate. You can still close your tailgate as usual with the anchor installed. The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single E Track anchor can be installed upside down - your E Track accessories will still lock into it securely.
The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long E Track sections. And the matte zinc finish resists rust.
Average Customer Rating: 4.9 out of 5 stars (241 Customer Reviews)
Add a tie-down point to your truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, this low-profile tie-down anchor has a zinc finish to resist corrosion. Bolt on wherever you need a strap-down point. Hardware sold separately.Nice anchors. The only issue I had was I needed to put a washer on the bold head because the square opening is so big. Not a big deal but something I didn't think about when I got these.
Excellent option for securing the 4 wheeler and other loads on my utility trailer. It was always a fight to get the straps in the right place until I bought these.
Easy in and easy out. Perfect for my constantly changing trailer needs.
Great low profile anchor point. Easy install with carriage bolts.
So, here we are, one year later...... These things are great - We use these in an enclosed trailer for tying down equipment, motorcycles, and what seems like all of the relatives' furniture, at one time or another.
They're mounted on the walls and in corner areas with lag screws into the cross members and they're working very well.
Nicely made Zinc plated bracket. You have to supply your own fasteners, I used 2 1-1/4" x 5/16" Galvanized stove bolts with flat and lock washers and nuts to attach to my boat trailer. Beats fussing with ratchet straps under the trailer. Buy 'em.
Works great where you can't or don't want to install an e-track.
Snap locks are also great.
These worked out great for my trailer. I also bought the straps to go with them. Both worked great.
Good customer service pointed out this product and it fits my needs for truck and trailer tie down. Delivery was fast.
These are great for adding a latch point for equipment in my concession trailer since I do not need a range of latch points. They hold strong and are simple to install. Hold a 350 lb refrig. while driving no problem.
I had to grind every one in order to make the rings fit.
The cad plated worked fine but these galvanized needed grinding
These look strong, and hope to use them on the sidewalls of my box trailer.
Always fast and great service. These tie-downs worked so easily and well, I purchased more.
Perfect for my ranger tie down system
These are very sturdy. Great for an area where you just need a single anchor point.
Ryan
5/25/2020
Still awesome. Very well made. Perfect for areas where a full rail cannot be used.
Good staff, got on time.
Marek
1/25/2016
Works great, good product.
Product worked well for our application.
everything i have ordered from your store i'm pleased with. i would buy from you again.
Fast shipping and good communication on the items that were on back order. Will buy from them again.
Love them, I can put hem right where I want.
Company is quick to respond and has great customer service and products
I have ordered here several times. You will never find better customer service, products or faster shipping!
great products, fast shipping, great customer service, will order again
Look to fit the bill. Heavy duty and all clips fit nicely.
Do you have a question about this E-Track?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ernie K.
2/25/2024
After a year they are still holding fast at the anchor point. Beefy and will probably outlast me!!