T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(48 reviews)
Price: $97.61
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118667
Retail:$137.14
Our Price: $97.61
You Save: 29%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (48)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118667
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points in trunk
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite power module that connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 4.2 amps per circuit
- Tail lights: 7.5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Power Module
A ModuLite power module is built into this T-One connector. With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118667 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Replaces 118531
Installation Details
This Product Fits The Following Vehicles
- 2006 - 2010 Volkswagen Jetta Sedan
- 2006 - 2010 Volkswagen Jetta Sedan - excluding TDI
- 2005 - 2005 Volkswagen Jetta New Body Sedan - excluding Turbo Diesel
- 2005 - 2005 Volkswagen Jetta New Body Sedan with round tail lights
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Did not fit
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118667
Average Customer Rating: 4.8 out of 5 stars (48 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Mike P09/02/2015
2009 Volkswagen Jetta
Installed both hitch and wiring this morning. Pretty straight forward - watch the videos to get a good idea, pre-install.
Only regret is I should have ordered the Jetta specific ball hitch at the same time as the hitch and wiring. Thought I could find it locally, but now will pay for shipping...
by: Brian06/05/2023
Arrived on schedule in good condition despite horrible packaging (parts of the Hitch were protruding from the box.
Installation was fairly straightforward. Images in instructions could have been bigger.
by: Rebecca11/08/2023
Great fit and easy attachments
by: Duckdup11/30/2022
2006 Volkswagen Jetta
It could use a better instruction sheet with sharper pictures & clear steps, e.g. where is step number 9? A routing guide for the power lead would help. Quality of manufacture seems good and works as expected.
Jenny N.
12/1/2022
Yikes, you are right! It does seem step 9 went missing. I think what has happened is that when the manual was last revised the steps were condensed however the numbering became off. I did contact the manufacturer about it. In the meantime we do have a FAQ that can help when it comes to routing the power wire.
Helpful Links
by: Hal K06/20/2020
Fantastic product. I wanted to add a trailer harness without cutting or splicing any of the car wiring. Installation was a breeze, and the system works like a charm. The one change I made was to add a plug for one of the lighter sockets rather than run a wire all the way up to the battery. My car has a pass-through from the trunk, so it's easy to plug in the power cord when I want to hook up the trailer.
by: Andrew06/13/2016
2006 Volkswagen Jetta
Fairly easy install after watching the YouTube video posted on website. The instructions were not the easiest to follow when it came to feeding a bolt and bracket through the frame due to lack of pictures to show which hole to use but otherwise looks clean. Highly recommend to watch install video. I love the wiring harness and the fact no splicing of factory wiring was required. I have not cut my original plastic cover on bottom of car to reinstall around the tow hitch yet but do intend to put back on the car.
by: Lonnie05/31/2016
Product arrived 2 days later along with my trailer hitch; free shipping. Both videos were a godsend. It's so much easier to watch a video compared to a diagram. I wish more companies would follow suit. The pre-made harness with the plug-and-play comcept was a definate upgrade compared to the old style where you had to clip to existing wires. This way, it could always be removed with damaging the existing harness.
by: Zachary03/12/2018
2006 Volkswagen Jetta
This kit made my Curt hitch install complete. With plug and play wiring adapters, 12 gauge power wire spool supplied, I had this wiring harness installed in no time. I recommend taking your time and removing all cargo panels and trim to install this harness. It makes for a seamless professional install. Thank you!
by: Robby 01/23/2021
I had purchased a wiring harness that was not custom made for my vehicle, but it was not up to the task, (or I was not sharp enough to get it done). The harness from E Trailer fit nicely and the customer support was excellent!
by: Dwyer R.05/22/2017
2009 Volkswagen Jetta
This part works well. The installation to the tail lights themselves was very simple and only took about 10 minutes. Running the power supply from the battery to the trailer took some time (~2 hours) though. The difficult part was accessing the engine compartment through the firewall on the driver's side. Would be helpful to have more vehicle-specific pictures on this step. Otherwise, the installation process was seamless with a simple electrical wiring kit.
by: Nick S06/28/2016
2006 Volkswagen Jetta
I used the hitch and harness for about 6 months and it worked awesome! Could not be happier. I sold the car and really wish the hitch transferred to my New car because it was so useful
by: Sam07/12/2019
When it showed up wasn't expecting the hitch to be so beefy! Excellent build quality and paint, this hitch is SOLID. The wiring kit I also ordered was very high quality and well built. I would definitely recommend any of etrailers products to anyone looking for hitches and accessories.
by: Stefan01/26/2019
2006 Volkswagen Jetta
The so called T-connectors fit the factory taillight plugs perfectly. The only irritating part of this install was running the wire from the unit to the battery at the front of the car.
It would be nice if the unit came with a 12V cigarette lighter adapter, as my car has a plug in the trunk. If that was included install would have taken about 5 minutes tops. I may actually make one now that I think of it.
by: Anthony S02/23/2020
Volkswagen Jetta
The wiring kit works great. It was easy to install and came with everything needed. The video describes exactly how to install it. I have had It installed on my jetta for more than a year and it has been great.
by: Istvan10/29/2020
2009 Volkswagen Jetta
I purchased this item for my 2009 Jetta TDI. I didn't feel like cutting my factory wires so I went with T-One Connector, plug and play great item and has everything what you need to do the job.
by: Wendell S05/03/2020
Great product and worked well. Easy installation with great instructions and good price. Would highly recommend. So far no issues.
by: Brandon05/21/2020
Plug and play, very easy installation. The instructions say to run a wire directly to the positive terminal on the battery. I just spliced in the 12V socket in the trunk instead.
by: Ed S.06/15/2015
2010 Volkswagen Jetta
The trailer wiring kit was easy to install in my 2010 Jetta.
by: Ian 09/25/2018
If you can follow simple instructions, installation is no problem, complete.
by: Peter 10/30/2021
Great idea to make a plug-in trailer harness. Easy to install and works .
by: Dale 08/15/2015
great product received it today and installed this afternoon. Very easy install except for routing the power wire to the battery. Took approximately 15 min. to install the system and 2 hrs. to route the power wire.
by: Dan O04/21/2018
2003 Dodge Ram Pickup
This is my third time using this product. This unit was purchased to replace an existing unit that failed after 2.5 years and being subject to 2 or 3 hard shorts. The product is easy to install and etrailer usually ships it faster than quoted.
by: Charles 09/15/2021
Customer service is awesome. I have bought several trailer items from etrailer and that all worked and or fit. Thanks ahain.
by: Allan05/14/2018
2006 Volkswagen Jetta
Easy to follow instructions. Works per fectly
by: curt d08/01/2017
Thanks , everything was great, fast delivery, great how to videos, great products and prices!
25
48
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Hitch and Wiring Recommendation for a 2006 Jetta TDIFor a hitch I would recommend you get a Curt Trailer Hitch # C11474. I attached an installation video and instructions for you to check out also. For wiring I would recommend the Tow Ready Harness # 118667 that you referenced. This is a plug and play harness that will plug right in to your tail light wiring and should work very well for you. Check out the installation instructions and video I attached also. You may be interested in a 1-7/8 inch hitch ball # 19256 to complete your towing setup.
view full answer... - Trailer Wiring Kit that Fits 2010 Volkswagen Jetta SportwagenThe Tekonsha kit part # 118667 only fits the sedan models of the 2010 Jetta. For the Sportwagen you'd need the # C59236 which happens to be a universal style kit.
view full answer... - Recommended Trailer Hitch and Wiring Harness for 2005 Volkswagen Jetta New BodyThe trailer hitch I recommend for a 2005 Volkswagen Jetta New Body is the Curt Trailer Hitch Receiver part # C11474. It has a class I rating with 1-1/4" receiver tube opening. Then for the trailer wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118667 which has a standard 4-way flat connector.
view full answer... - Trailer Hitch Recommendation for a 2006 Volkswagen Jetta TDIThere are only Class I trailer hitches available for the 2006 VW Jetta, see link. I recommend the Curt # C11474. The recommended ball mount is # 3593. For a 1-7/8 inch ball use # 19256. For a 2 inch ball use # 19258. This hitch has a 200 pound tongue weight capacity and 2,000 pound gross trailer weight capacity. Be sure to check the vehicle owners manual to determine the towing capacity of the vehicle. For trailer wiring, use # 118667. I have included a link to the wiring and hitch instructions...
view full answer... - Draw-Tite Sportframe Trailer Hitch Receiver for 2009 Volkswagen Jetta TDI SedanI have a solution for you but EcoHitch does not make a hitch receiver for any 2009 Volkswagen Jetta model. I checked with Ecohitch they did not start making hitch receivers for the Jetta SportWagen model's until 2010 and the Jetta sedans until 2015. I recommend the Curt Trailer Hitch item # C11474. This hitch receiver is a confirmed fit for the TDI models. It has a towing capacity of 2,000 lbs and maximum tongue weight of 200 lbs. This is a class 1 hitch with a 1-1/4" x 1-1/4" receiver...
view full answer...
- Availability of Hitch For a 2010 Volkswagen Jetta TDI SedanI spoke with my contact at the manufacturer and yes, the Curt Trailer Hitch Receiver Class I - 1-1/4, part # C11474, will fit a 2010 Volkswagen Jetta. Some items you may need to complete your towing setup are. Wiring # 118667 Ball mount # 3593 Ball # 19256 or # 19258
view full answer... - Trailer Wiring Harness that Fits 2006 Volkswagen JettaSorry for the confusion but the part # 118667 is the correct trailer wiring harness for your 2006 Volkswagen Jetta. This part number replaced the 118531 that you found reference to which is why it was mentioned.
view full answer... - Trailer Wiring Harness for 2009 VW Jetta Sportwagen TDIYes, you are correct that Tow Ready wiring harness # 118667 is intended for only the 4-door sedan versions of the Jetta. For a 2009 VW Jetta Sportwagen TDI Tow Ready does not offer a wiring harness. However, Curt does have 4-pole wiring kit # C59236 that is a confirmed fit for the 2009 Volkswagen Jetta Sportwagen Wagon, including the TDI. I linked an installation video for this item showing a 2009 Sportwagen TDI. You can use install kit # 55151 to simplify the process. This includes...
view full answer... - Trailer Hitch Receiver, Wiring Harness and Ball Mount For a 2006 Volkswagen JettaAs you are looking at the Curt Trailer Hitch Receiver # C11474 and T-One Vehicle Wiring Harness # 118667 for your 2006 Volkswagen Jetta TDI Sedan, Curt recommends the Ball Mount # 3593. This ball mount will accept either a 1-7/8" Ball # 19256 or 2" Ball # 19258 to match your trailer coupler. I recommend a Ball Mount Bag # ETBMB to store the ball mount, pin and clip when not in use. This will help keep everything together when you need it.
view full answer... - Recommended Trailer Wiring for 2009 Volkswagen Jetta TDI SedanFor your 2009 Volkswagen Jetta TDI Sedan, I'd recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118667. This is a custom fit harness that will allow you to simply plug and play with your current vehicle wiring. There is no splicing or cutting involved with your vehicle wiring. You just run a power wire to your battery, connect the white wire to a clean ground location, and plug the harness in behind your tail lights. I've attached a review video...
view full answer... - Trailer Wiring Harness Options for a 2007 Volkswagen RabbitThe 5th generation Jetta and Rabbit were similar in some respects as you pointed out, but the tail light assemblies were different, so the Tow Ready T-One harness, # 118667, will not fit your 2007 VW Rabbit. We have trailer wiring harnesses that will work with your Rabbit, but none of them are the plug-in style wiring harnesses. I recommend the ZCI wiring harness, # 119250KIT. The ZCI harness is a great choice as it does not require any cutting or splicing of your vehicle's tail light...
view full answer... - Will Tow Ready Trailer Wiring Harness 118667 for a 2009 Volkswagen Jetta Work with Rental TrailersYes, the T-1 trailer wiring harness # 118667 will be compatible with any rental trailer that requires a 4-Way flat trailer connector. I have included a link to the installation instructions for you.
view full answer... - Trailer Hitch, Wiring, and Accessories to Tow a Rental Trailer with a 2009 Volkswagen Jetta SedanYes. the Curt trailer hitch # C11474 can be used to tow a rented U-Haul trailer. To tow a rental trailer, they will require the hitch and a wiring harness installed on your 2009 Volkswagen Jetta Sedan. You will also need a ball mount, # 3594, and a ball. The size of the ball will depend on what the coupler on the trailer requires. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For a trailer wiring harness use # 118667 to add a 4-Way flat connector to the rear of the...
view full answer... - Is There Any Way to Install Tekonsha Trailer Wiring Harness 118667 on 2010 Volkswagen GolfThe # 118667 cannot be used on your 2010 Volkswagen Golf you would need a new harness like the # C59236 which is a confirmed fit. The connectors and wiring configuration of your Golf would not work with the harness you mentioned.
view full answer... - Trailer Wiring Recommendation for a 2006 Volkswagen JettaWe actually carry a trailer wiring harness for your 2006 Jetta that is a very easy installation. Take a look at the Custom Fit Vehicle Wiring, # 118667. This is what is called a T-One harness because it plugs in line with the vehicle tail light wiring so you will not have to splice into the vehicle wiring. I have included a link to the installation details for you. You will be able to perform this installation at home based on the easy T-one style connectors.
view full answer... - Trailer Hitch and Wiring Needed for 2006 Volkswagen JettaThe Curt Hitch part #C11474 is a confirmed fit for your 2006 Volkswagen Jetta as long as it is not the TDI version. It has towing capacities of 2,000 lbs total trailer weight and 200 lbs tongue weight. You would have to check the owner's manual of your vehicle to determine what the towing capacities are and be sure to stay under the lower of the two ratings as you are only as strong as the weakest component in a towing setup. For trailer wiring you would then want the part # 118667. For...
view full answer... - Recommended Trailer Hitch/Trailer Wiring For A 2009 Volkswagen Jetta TDII recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24866 for your 2009 Volkswagen Jetta. The Curt hitch is not confirmed to fit the TDI model of your Jetta. The Draw-Tite hitch has a bolt-on installation with no welding required and has a black powder coated finish that offers a superior rust protection. For the wiring harness you will need the T-One Vehicle Wiring Harness # 118667. I like the T-One harness over the other harnesses that we offer because it has a more reliable...
view full answer... - What is the Correct Trailer Wiring Harness for a 2009 Volkswagen Jetta SportwagenI checked with the trailer wiring manufacturers that we carry and the 2009 VW Jetta Sportwagen requires a different wiring harness than the 4-door sedan models. You will need to use # C59496, or # C59236. I have included a link to the instructions.
view full answer... - Trailer Part Difference Between 2010 VW Jetta Sedan and Sportwagen ModelsYes. There is a difference in the fit for a 2010 Jetta Sedan compared to the Jetta Sportwagen. For a 2010 Jetta Sedan, I recommend the Curt # C11474 for a trailer hitch, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118667 (which connects behind tail lights), and ball mount # 3593. Then you can use hitch ball # 19256 for a 1-7/8 inch diameter ball or # 19258 for a 2 inch ball. For a 2010 Jetta Sportwagen, the frame is the same so the hitch will be the same but...
view full answer... - Trailer Hitch Receiver Fit for 2007 Volkswagen Jetta WolfsburgWe do have a trailer hitch receiver that fits your 2007 Volkswagen Jetta Wolfsburg, so long as it is the 4-door sedan and it does not have the diesel engine. If your '07 Jetta Wolfsburg meets those specs the correct trailer hitch fit is the Curt Trailer Hitch Receiver # C11474. I confirmed this fit for you with the manufacturer, and if you plan on doing some towing with your Jetta, there are a few other parts you'll need: - T-One Vehicle Wiring Harness # 118667 - Curt Drawbar # C45520 -...
view full answer... - Trailer Hitch and Wiring Recommendations for a 2010 Volkswagen JettaThere is only one hitch available for your 2010 VW Jetta (non TDI). We have the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11474. It is going to offer approximately 9-3/4 inches of ground clearance from the bottom of the receiver to the ground. This hitch would be safe and secure for towing a trailer up to 2,000 pounds. The hitch not does come with the correct ball mount or a properly sized ball for the coupler on the trailer you plan to tow. For a ball mount use #...
view full answer... - Trailer Wiring Recommendation for a 2007 Volkswagen GTIFor your 2007 Volkswagen GTI the only trailer wiring I can recommend for you is the part # C59236 that you referenced. The # 118667 would not fit as it is designed for different vehicles.
view full answer... - Correct Wiring Trailer Harness for 2006 VW JettaThe correct trailer wiring harness for a 2006 Volkswagen Jetta (Sedan Only) is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118667. This harness has two connectors, one plugs in behind each tail lights.
view full answer... - Does Curt Trailer Hitch C11474 have a Different Capacity if the Trailer has BrakesThe Curt trailer hitch # C11474 is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight regardless of whether or not the trailer has brakes. The tow vehicle or your local area may have restrictions, but the hitch does not. Consult the vehicle owner's manual to see what it is rated for. The recommended ball mount is # 3593. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258. And for trailer wiring you can use # 118667 to add a 4-Way connector to the...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Written by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike P.
9/2/2016
working out great thanks. actually towing the sailboat tomorrow!