4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
Item # 18252
Our Price: $28.77
Confirmed to Fit
2019 Ford F-250 Super Duty
without factory trailer connector
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (209)
- Q & A (0)
- Photos
2019 Ford F-250 Super Duty - 4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Trailer Hitch Wiring
- 4 Flat
- No Converter
- Tekonsha
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole, and 7-pole adapters (sold separately)
- Works with 2-wire electrical systems
- Splices into your vehicle's wiring with the included quick-splice connectors
- Bonded wires are color coded (see wiring configuration below) and labeled
- Included circuit tester helps ensure wiring is correct during installation
- Includes durable, molded-rubber, standard female output socket
Specs:
- Harness length: 72"
- Max amperage: 7.5 amps per circuit
- Wire gauge: 18
- Limited 1-year warranty
4-Way Trailer Connector Installation
Because the color/function of the wires on this connector may not match the color/function of those on your vehicle, be sure to use the included tester to double check the function of each wire on your vehicle's tail light wiring harness before installing this connector. Once you've figured out the functions of your vehicle's wiring, use the included quick-splice connectors to connect the corresponding wires on the trailer connector. Quick-splices, or "wire taps," offer a quick way to make connections without you having to strip and twist wires. Just place the wires in it and snap the cover down.
The number 1 reason trailer wiring comes up faulty is a bad ground, so make sure your ground wire has a solid and clean connection to metal. To make this connection, you'll need a self-tapping screw and a ring terminal (sold separately).
Wiring Configuration
| Wire Color | Wire Function |
|---|---|
| Green | Right turn and brake light |
| Brown | Tail lights and running lights |
| White | Ground |
| Yellow | Left turn and brake light |
Quick Tips:
We install a lot of wiring harness around here, so we thought we'd share a few tips we've picked up over the years:
- Butt connectors - especially heat-shrink ones - provide the most secure, longest-lasting connection, so we'd recommend you grab a few and swap them out for the quick-splices in this kit.
- Use a circuit tester on the plug terminals once the harness is installed to make sure everything's working. There's nothing worse than figuring out that you have a bad ground or a faulty connection right before you're about to hit the road.
- Be sure to put a little bit of dielectric grease on the 4-way plug to protect the terminals from dirt, grime, and corrosion.
18252 Tekonsha Ford F-250 Super Duty Wiring Harness with Ford F-250 Super Duty End 4-Pole Connector Kit and Circuit Tester - 6' Long
20252 Alternate
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps - 18252
Average Customer Rating: 4.6 out of 5 stars (209 Customer Reviews)
This universal, splice-in wiring kit includes a 4-way flat connector, circuit tester, 72" of bonded wire, and 4 wire tap connectors. Color-coded, bonded wires have functions printed on them to make installation easier.by: Vincent05/30/2019
2014 Smart fortwo
Thanks to the video I did not have a problem installing the trailer wiring on my 2014 Smart Fortwo.
Thanks
by: Tim C10/26/2019
Awesome product never any issues use along easy install practically don’t need instructions
by: Eric 05/22/2023
Chevrolet Corvette
This harness worked great for my Corvet te.
by: Michael11/07/2022
Worked great for 6 mo. Ish. I’ve had the right side wire become loose/break so occasionally the right side will randomly choose to quit working but (at least for me) that’s not a huge deal with how little I use my trailer. solid purchase overall.
Katrina B.
11/18/2022
I have contacted the manufacturer and the have suggested that the wiring harness should be checked for a good connection, it sounds like the harness may not be connected correctly.
by: Brian03/14/2019
First thing I noticed were the online videos that can be saved to a file. nice! also noticed the instructions for assembly of the tow bar was small and difficult to read, (my mechanic was crying throughout the installation) There were no instructions on the wiring kit installation, even a photo of the wire to wire color placement would have helped, but my mechanic went on line and got the photo from an outside source - thus the 4 stars, not five. - other than that it worked out very well, the products are solid, well made, and superbly engineered. everything was inside! thanks !
Mike L.
3/15/2019
We have a link to the installation instructions as well as some install videos on the product description page.
by: Russell04/03/2017
2006 Ford Focus
The installation documentation, along with the video aid, was very helpful and easy to understand. It helped a lot, and made the installation fast and easy. I like it a lot, and I appreciate the support I got on a minor issue which was easily and quickly taken care of.
Russell
4/4/2018
The products I purchased work beautifully! I haven’t experienced a single issue with anything.You guys are terrific!
by: Timothy04/06/2023
Each trailer is the best. Very easy to order from. Also, Sherry was very helpful and friendly.
by: Tom08/23/2021
1990 Dodge Van
Took me almost a year to actually get to installing this on the van, but wanting to use the trailer was a strong motivator. Its just a basic wiring set with quick connect clips in a bag. The fact that I was installing this on an extended camper version of the van this was designed for complicated the install, but "fortunately" there were enough rust holes that I could drill where I need to drill. Wires were long enough for the job (exactly the length needed) and the clips came pre-filled with silicone grease. Nice. Came with no instructions, but the on-line installation video is *excellent* and guided me thru the entire process. Overall, it was a convenient way to buy and install a wiring harness on my older van. Only two minor complaints:
* Did NOT include a weather-proof cap for the plug, which hangs outside by the hitch. I took the one included with the wiring kit for my Suburu (from etrailer) since that plug is stored inside the vehicle.
* The 12v circuit tester did NOT work. Fortunately I had my own tester.
by: Johnny12/16/2018
2007 Ford Focus
This was a pain in the rear end. Wires were not labeled and the tester was useless. Had to go to online for some instructions (none included with kit). Took a long time to get it wired to the car.
Mike L.
12/17/2018
On the product page, we have a link to the instructions as well as a couple of install videos.
by: David06/01/2019
1984 Jeep CJ-7
I got a 4-wire harness to connect my jeep to a utility trailer. The harness worked perfectly.
The connectors were good--surprisingly, they were stuffed with noncorroding gel so that the jeep's wires are protected. There were no specific instructions for the hookup, but simply removing the taillight lenses showed which color wires to splice.
The supplied tester failed to function, but that wasn't a problem at all--I didn't really wish to poke additional holes into the wires anyway.
Took a half hour to complete.
by: Kyle03/23/2017
2001 GMC Sierra
Has held up great over a year so far. I recommend wrapping the wiring in electrical conduet to help make the set up last even longer like I have
Kyle
3/23/2018
Perfect!
by: Matt F03/09/2020
Product as described and very easy to install. In my case it didn't work, because the original wiring on my truck apparently is bad and I couldn't figure out what was faulty, so I ended up getting another harness that plugs into existing tail light harness, which worked great.
by: TJ06/27/2013
2006 Chevrolet Malibu
I watched the video online to install the wires and did it all by myself. Product arrived in good condition.
Tj
12/26/2014
No problems, whatsoever! Good product for the price. I especially loved the fact that one could watch the video online on how to install it. Thanks!
by: Jeff G.06/10/2017
2005 Ford Focus
I installed this wiring kit along with a hitch. This was pretty easy to install, and the directions were easy to follow. The hardest part was pulling up the the liner in the hatch back area to get to the wires.
by: Mike D.05/06/2020
I needed a hitch and wiring harness to pull a small trailer for hauling lumber. The harness was easy to install and has worked without any problems over the past year.
by: Stan05/24/2018
1998 Chevrolet Blazer
Only thing that needed to be changed was wire connectors. Type included with the plug are easy to install (no insulation stripping, just clamp) but are not reliable. Throw those away and use standard crimp butt splices. Plenty of wire included, so I cut to more convenient length, spliced, and taped 8 inches on both side of splice. Tester is a nice touch, save in your tool box after installation.
by: Timothy09/17/2022
1992 Dodge Van
Over all good experience
Missed the bolt package in my delivery but it was sent out right away... Friendly customer service... Hitch went on without a hitch. Great product..I will use this company again.. Thank you
by: John11/13/2021
The box of contents I received was partially damaged and the boxes inside not properly secured and wrapped and damaged inside.There was a hole in the box and am missing one elecrical connector. Everything else was O.K.
Jenny N.
11/16/2021
I will have our customer service team reach out to you.
by: Tony 05/30/2023
Their customer service is amazing and within a few day my order was here.
by: big chicken07/03/2015
2003 Ford Focus
Perfect & simple as one, two three then your done. Thanks etrailer
Super Fast delivery from etrailer 5 star*
Big C.
7/27/2016
Everything is still working great.100 satisfied with the hitch and all I purchased.
by: Stephen09/19/2018
Exactly what I was looking for. Great price and fast shipping.
Stephen A.
9/19/2019
Works great!
by: Mike K05/24/2018
2013 Ford Edge
Worked perfect. I used it to extend the pigtail on my tow dolly. etrailer has great shipping & service. Have bought from them many times.
by: Gene08/15/2014
Your product was easy to install and works fine. However, one thing that I think would be a good idea, would be to include a set of installation instructions with the product. I didn't know that the metal tabs on the connectors had to be pushed all the way down before snapping the plastic hinge over the top of the tab. A friend of mine informed me of that.
by: K Sally06/07/2017
Hummer H3
Everything was sent according to order and mailed extremely quickly. Product was easy to use on a Hummer H-3 for a trailer hitch.
25
209
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Trailer Hitch Fit and Brake Controller for 1968 GMC 1500 With 8 Foot Bed and Deep Drop BumperWe do have a trailer hitch receiver that will bolt onto your 1968 GMC C1500 truck with an 8 foot bed and deep drop bumper. So long as your truck has a frame that is 34" outside to outside the correct fit is the Curt 3-Piece Trailer Hitch Receiver # C15511. As for the brake controller, you will need a few things, starting with the wiring, and keep in mind this is all going to need to be hardwired in. The first thing you will need is a 4-way, the 4-Pole Hardwire Kit # 18252. After that...
view full answer... - Solution for Adding Second 4-Way to 4-Way WiringBest option we have for that would be a 4-way kit like the part # 18252 which you can splice into your current 4-way wiring to give you a second one like you are looking for. There isn't a y-adapter available like you mentioned.
view full answer... - Does the GM Brake Controller Adapter # 3015-S Fit on the 2005 GMC Safari VanThe GMC Safari Van is not equipped with brake controller wiring connector under the dash, like the GM full size truck and SUV is. Installing a brake controller on the Safari will require hard wiring a brake controller. We have a Brake Controller Installation Kit, item # ETBC7, that includes all of the wiring, circuit breakers and hardware needed to install a 7-Way trailer connector and a brake controller on your vehicle, as long as the factory 4-Way wiring is in place and working properly. We...
view full answer... - How to Install the Tekonsha P3 90195 on a 2006 Forest River Georgetown 359Installing the Tekonsha P3 # 90195 will depend on how your 2006 Forest River Georgetown 359 is equipped. If there was a 7 Way plug on the back of the RV, you may have wires under the dash for a controller to plug into, but you would need to confirm this with Forest River. If they can tell you there are wires pre-run, you will simply need to splice them into the wires of the controller and you are good to go. If the RV does not have wires run for a brake controller, it will be a bit more...
view full answer... - Brake Controller Recommendation for 1983 Jeep CJ7You will need to start with a 4-way (if you do not have one). For that you would want the # 18252. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. For a brake controller I would recommend the Brake EVN # TK63VR. This is one of our best selling brake controllers...
view full answer... - Recommended Trailer Hitch Receiver And Wiring For 2020 Forest River Heritage Glen 5th Wheel TrailerAs long as the frame of your 2020 Forest River Heritage Glen 5th Wheel Trailer is 18" - 51" wide I highly recommend the Curt Adjustable Trailer Hitch Receiver # C13701 which can be bolted or welded to the frame of your trailer and offers a 500lb maximum tongue weight and 5000lb maximum trailer weight. You will want to check the owner's manual of your trailer or contact the manufacturer to verify the maximum trailer weight your trailer can tow. Since you are planning to tow another trailer...
view full answer... - Recommended Trailer Hitch Receiver Confirmed to Fit a 1989 Jeep Wrangler YJFor your 1989 Jeep YJ, the manufacturer Curt confirms the fit of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13657. Other sites may not know that the 1989 Wrangler and the 1989 YJ are the same vehicle. Not everyone knows the Jeep terms and models and we actually put both in our fit guide to mitigate confusion on fit. If you will be towing with this trailer hitch receiver, I also recommend the 4-Pole Hardwire Kit with Circuit Tester # 18252. This kit will give...
view full answer... - Recommended Trailer Hitch and Wiring for 2006 Ford MustangThe trailer hitch I recommend for a 2006 Ford Mustang Curt Trailer Hitch Receiver part # C11312 which is a confirmed fit for V6 models. Then for a trailer wiring harness, the 4-Pole Hardwire Kit with Circuit Tester # 18252 would work well for you. In order to complete the towing setup, you'll need the Draw-Tite Drawbar part # 3592 (Use in the rise position) and the 1-7/8" Hitch Ball part # 19256 or 2" Hitch Ball part # 19258. This setup will give you a hitch ball height of around 15" which...
view full answer... - How to Wire 2004 Ford E-350 Cab and Chassis for 7 Way ConnectorWe do have options that will work for you, but there is no T-connector wiring harness that will simply plug in to your motorhome. Since you have no trailer connector at all on your motorhome, you will need to do some hardwiring. First you will also need to install a 4-way on the rear of your motor home like # 18252. Next you will need the 7 and 4 Way Installation Kit, part # ETBC7. The # ETBC7 kit comes with 25 feet of duplex wire. I am including a link to a help article page on how to...
view full answer... - Trailer Hitch Receiver Recommendation For 2001 Dodge 2500 VanThe Draw-Tite Class III Max-Frame Trailer Hitch Receiver # 75140 is the one I recommend for your 2001 Dodge 2500 Van. It is designed to fit both the step bumper and standard bumpers that came from the factory on your Van. The receiver is rated for 500lbs of tongue weight and 5,000lbs towing with a standard trailer hitch and with weight distribution hitches capacity doubles to 1,000lbs of tongue weight and 10,000lbs of trailer weight. A etrailer Anti-Rattle Hitch Stabilizer # e99007 will...
view full answer... - Troubleshooting Trailer Running Lights Not Working on Factory 4-Way For 2013 Ford F-150It sounds like you have done most of the troubleshooting already! You have ruled out the fuses/relays being the problem and by testing the 4-Way on the F-150 and seeing that you aren't getting power at the running lights pin, you also know that the trailer isn't an issue. At this point the problem has to either be coming from the actual factory wiring between the running lights circuit and the 4-Way, or with the 4-Way connector itself. Since testing/inspecting the factory wiring will...
view full answer... - Recommended Trailer Hitch Receiver and Wiring for 2017 Dutchmen Aspen Trail Travel Trailer 18 FootFor your 2017 Dutchmen Aspen Trail Travel Trailer, I recommend the Adjustable Width Trailer Hitch Receiver for RVs, 22" to 66" Wide # C13704. Then you can use a standard ball mount and hitch pin like the Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K # C45534. Then you will need to add the 4-way wiring like # 18252. You can then use the mounting bracket # 18144. For trailering your bike, I recommend the B&W Biker Bar Motorcycle Tie-Down System for Trailers...
view full answer... - Recommended 7-way Connector For 2010 Ford F-150If your 2010 Ford F-150 came with a factory 7-way connector you will be able to use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 you were looking at. If your F-150 did not come with a factory 7-way connector you will need to use the # ETBC7 if your truck has a 4-way connector already installed, or the 4 Pole # 18252 and # ETBC7 if your truck did not come with a factory trailer connector. The # ETBC7 will plug into your...
view full answer... - Will The Draw-Tite Max-Frame Hitch # 75122 Fit 2000 GMC Safari w/ OEM Spare TireFrom the information I found, the Draw-Tite Max-Frame Hitch # 75122 will fit the 2000 GMC Safari standard chassis w/ the OEM spare tire size mounted underneath the van. I also contacted our representative at Draw-Tite Hitch and he confirmed that the # 75122 hitch will fit your 2000 Safari, as long as the tire size is the OEM size. Only on older vans from 1985 to 1994 was there an issue where the spare tire would not fit in the factory location with the hitch installed. You will be able...
view full answer... - Can a Converter Box Be Used on a 6 Volt System The Hopkins Tail Light Converter Kit with 4-Way Flat Connector part # HM48895 will not work on a 6 volt system. We also don't have any trailer wiring harnesses with a converter box that will work on a 6 volt system. The issue is with the converter box itself as it is not equipped nor designed to be used on a 6 volt system. However, this converter box will only be needed if the vehicle's lighting circuit cannot handle the additional draw of the trailer lights. As long as the vehicle's lighting...
view full answer... - Is Drilling Required to Install CURT Trailer Hitch # C15445 on a 2011 Ford F-350 Cab and ChassisTo install the CURT Trailer Hitch, # C15445, on a 2011 Ford F-350 Cab and Chassis only model, you will need to drill two holes in the frame using a 9/16 inch drill bit. These holes are for the forward most attachment points on the vehicle. I have included a link to the installation instructions for you. For this hitch, I recommend the etrailer Ball Mount Kit, # EBMK2416. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a carrying bag. If you need trailer wiring...
view full answer... - Is Circuit Breaker Needed When Installing Draw-Tite Brake Controller # 5504 On 2000 Chevy SilveradoIf your 2000 Chevy Silverado has the factory 7-way trailer connector on the rear of the vehicle you can use the Draw-Tite Brake Controller # 5504 and the Draw-Tite Universal Wiring Adapter # 3025-S. A circuit breaker and a fuse do the same thing in keeping a circuit from being overloaded. The difference in the two is that the fuse is one time use only, and the circuit breaker will reset after a certain amount of time. A fuse will just plug into a slot and a circuit breaker has to be wired...
view full answer... - Recommended Trailer Hitch for 2017 Grand Design Solitude 5th WheelThe Adjustable Width Trailer Hitch Receiver for RVs part # 13703 is my recommendation for a 2017 Grand Design Solitude 5th Wheel. This trailer hitch is by far the most popular option for trailers as it works really well and can be installed easily. In order to control the lights you'll also need the 4-Pole Hardwire Kit with Circuit Tester part # 18252.
view full answer... - Can New 4-Way be Spliced Onto Trailer Wiring Harness 118566 on 2015 Ford EscapeYes, you can splice in a new 4-Way flat vehicle end, such as # HM48190. This vehicle-side 4-Way also has LED test lights so its easy to determine if one of the circuits isn't working. Or for a regular short-length harness you can use # 18252.
view full answer... - Instruction Manual Needed for a Tekonsha 2016 Hydraulic Brake Controller On a 1986 Ford F-250The wiring diagram for wiring your truck to your trailer can be found on our wiring page (see link). We also have a brake controller wiring diagram on our brake controller wiring page (see link). If you are wiring a 7-Way connector I would recommend the # ETBC7 wiring kit which has all of the wiring, circuit breakers and parts needed to install the 7-way once you have a 4-Way installed on the truck. If you need a 6-Way connector then the # ETBC6 wiring kit will be what you need. You can...
view full answer... - Hitch Needed for 1995 Oldsmobile Cutlass CieraI have confirmed with Draw-Tite that the Class II Receiver Hitch, part # 36188 is indeed the correct hitch for your 1995 Oldsmobile Cutlass Ciera. The wagon model does use a completely different hitch. To make the install a bit easier, I would recommend purchasing a couple of the fish wires (part # 80101-1) that will assist threading the hardware through the vehicle frame. You might also need the following: Wiring Harness with 4-Pole Trailer Connector, part # 18252 Draw Bar, part # 36053 1-7/8...
view full answer... - Will Installing the Curt Class I Hitch # 11114 on the 2008 Saturn Sky Void the Vehicle WarrantyThe Curt Manufacturing Class I Trailer Hitch Receiver with Drawbar, item # 11114, for your 2008 Saturn Sky, will not void the vehicle warranty as long as all of the towing limitations of the vehicle and the hitch are closely adhered to. There is a federal law called the Magnusson-Moss Warranty Act, which states that unless the modification to your vehicle, in this case the hitch, caused the problem your warranty must be honored. This being said you will need to use common sense precautions...
view full answer... - How To Wire Tekonsha Prodigy P2 Brake Controller, # 90885, To A 2001 Ford F-150 With Damaged WiresIt sounds like you should just wire your 2001 Ford F150 like it did not have a factory tow package. You will need to install a 4-pole trailer connector at the rear of your vehicle. If your truck is a Styleside you will need to use the Draw-Tite Wiring Harness, # 18252, and use the included circuit tester to test the the light circuit behind the truck taillights. Then using the wire taps you will attach the wires to the correct circuit. The white wire is grounded to the vehicle frame,...
view full answer... - Recommended Trailer Hitch Receiver for 1979 Ford F-250I recommend the Curt Class III Trailer Hitch Receiver # 13028 for your 1979 Ford F-250. This hitch will fit either the standard bumper or the deep drop bumper. It will however, not fit if you have lower rear fascia or a rollpan or tube bumper. It is a bolt on installation but does require some drilling. For trailer wiring you can use the Tekonsha Wiring Harness # 18252. This will add a 4-pole onto the back of your truck and includes quick-splice connectors to make it easier to hardwire. If...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Jared G
Test Fit:
Robert C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video Edited:
Sue W
Video Edited:
Chad S
Video Edited:
Chris R
Updated by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Updated by:
Sabrina W
Video by:
Alan C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent S.
5/31/2020
Just fine.