Will Installing the Curt Class I Hitch # 11114 on the 2008 Saturn Sky Void the Vehicle Warranty
Question:
if your hitch for an 08 Staurn Sky is utilized will it void the manufacturers warranty? Thanks
asked by: Larry C
Expert Reply:
The Curt Manufacturing Class I Trailer Hitch Receiver with Drawbar, item # 11114, for your 2008 Saturn Sky, will not void the vehicle warranty as long as all of the towing limitations of the vehicle and the hitch are closely adhered to.
There is a federal law called the Magnusson-Moss Warranty Act, which states that unless the modification to your vehicle, in this case the hitch, caused the problem your warranty must be honored. This being said you will need to use common sense precautions when using this or any other product on your vehicle. It is a good idea to contact the vehicle dealer and ask them about warranty issues related to installing a hitch, towing, or installing bike racks on your vehicle. In some cases, the vehicle manufacturer will specifically mention in the owners manual NOT to tow with the vehicle. If your vehicle manufacturer makes such a prohibition, I would recommend abiding by it.
Some items you may need to complete your Class I hitch setup are listed below.
Hitch Ball 1-7/8 inch, item # 19256
Hitch Ball 2 inch, item # 19258
Hitch Lock, item # e98879
Wiring, item # 18252
Products Referenced in This Question
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
etrailer Trailer Hitch Receiver Lock for 1-1/4" Hitches - Flush - 2-1/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 1-1/4 Inch Hitch
- Flush Pin
- 2-1/8 Inch Span
- etrailer
more information >