Replacement Scissor Jack for a 2008 KZ Coyote Lite CL168
Question:
What replacement scissor jack do i need for my 2008 KZ Coyote Lite CL168
asked by: Peggy
Expert Reply:
We have exactly what you need. I was able to confirm that your Gross Vehicle Weight Rating for your 2008 KZ Coyote Lite CL168 is 4000lbs. With that said using 4 of Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs gives you a total weight rating of 10,000 lbs which is more than enough to handle the job. The Etrailer Scissor Stabilizer Jack - 18-3/4" Travel Part # TJSC-24 is the way to go as long as the frame of your camper is not more than 23 3/4 inches form the ground. These are designed to attach directly to your camper's frame and in my experience most of the time will even line up with the holes already there. I've ran into a few exceptions to this but not very often. I have included a video I did on these for you to check out with some additional specs if you want them.
If your camper's frame is higher than that I recommend the Etrailer Leveling Scissor Jack - 24" Lift - 5,000 lbs Part # JSC-24-IND. These would be almost overkill in your situation giving a total capacity of 20,000 lbs. with 4 installed but occasionally the frame height is too high for the other option. These are designed to work with trailer frames up to 29" off of the ground. Typically for larger or off road campers but there is always the exception. I've included my video on this one as well if you need it. Happy Camping!
Products Referenced in This Question
Leveling Scissor Jack - 24" Lift - 5,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 4001 - 5000 lbs
- Scissor Jack
- 24 Inch Lift
- Bolt-On
- Weld-On
- 1 Jack
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 2001 - 3000 lbs
- Scissor Jack
- 18-3/4 Inch Lift
- Bolt-On
- 1 Jack
- etrailer
more information >
Continue Researching
- Shop: Scissor Stabilizer Jacks w/ Handle - 18-3/4" Lift - 10,000 lbs - Qty 4
- Shop: Scissor Stabilizer Jack - 18-3/4" Travel - 2,500 lbs - Qty 1
- Search Results: scissor jack
- Search Results: frame jack
- Search Results: trailer jack
- Q&A: Is New Mounting Hardware Needed For The etrailer Scissor Stabilizer Jack # TSJC-24
- Article: Trailer Wiring Diagrams
- Q&A: Is the Handle of the TJSC-24 Scissor Jack Sold Separately
- Article: Trailer Tire Sizing
- Q&A: Can 3,500 lb Axle Trailer Leaf Spring 25-1/4 inch get Replaced with 5k Rated Spring
- Q&A: Can I Upgrade My 3,500 lb Leaf Springs To 5,000 lb Springs If The Measurements Match?
- Q&A: Recommended Weight Distribution System for 2009 Trailmanor 3124KB
- Q&A: Hardware For Securing Trailer Stabilizer Jacks To The Trailer Frame
- Q&A: Is Lippert Flow Max RV Toilet Good For Part-Time RVers
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class