Will etrailer TJSC-24 Stabilizer Jacks Replace Jack on Rockwood 2104S Mini Lite Travel Trailer

Question

Question:

Will TJSC-24 stabilizer jack Match up with the holes on my 2019 2104S? Thanks

asked by: Michael H

0

Expert Reply:

I couldn't say whether the etrailer brand # TJSC-24 Scissor Stabilizer jacks would match up to the existing holes in your frame member as I do not know the hole layout, but what I can do is provide you with the bolt pattern used on the jack, which you can compare to the existing holes in the frame to see if they're compatible. There's also a crank handle, part # TJSC-24-HD which is sold separately.

I'll also link to a demonstration video that you might find helpful.

expert reply by: Mike L

0

Mounting Hole Pattern for etrailer TJSC-24 Stabilzer Jack
(click to enlarge)

Answer 1

The #TJSC-24 scissor style stabilizing jack isn't an RV specific product, if it's 2500 lb capacity and 18-3/4 inch lift and the pictured mounting bolt pattern is compatible with your Rockwood Mini-Lite, it'll work perfectly…

view full answer...

Answer 2

I have no doubts the Scissor Stabilizer Jack #TJSC-24 will work as a perfect replacement for the scissor stabilizer jacks on your 2017 Flagstaff T12RBST camper trailer because it has a large 10" x 3-1/4" mounting base with…

view full answer...

Answer 3

Yes, the Ultra-Fab Ultra Scissor Jack #UF48-979006 will work as a replacement for your damaged stabilizer on your 2019 Keystone Hideout 274LHS. This jack has a universal style bolt mounting plate and an oversized footplate to prevent it from sinking…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Will etrailer TJSC-24 Stabilizer Jacks Replace Jack on Rockwood 2104S Mini Lite Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching