Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Average Customer Rating: 4.8 out of 5 stars (1318 Customer Reviews)
Haven’t used it yet, but looks good. I’m not sure what height offset I need, so this kit gives me several options, plus two ball sizes. Really good value.
I installed the draw tite hitch onto my brand new 2018 Subaru outback. I'm 68 years old, not as strong as I was, but proud to say I did the job all by myself in about 4 hours. Here are some tips you may find useful.
Watch the video-it’s pretty good.
I had difficulty getting the exhaust system down and worried about getting it up again from the moment I got it down...read on-help will follow.
I bought a stepup drill bit which worked great for drilling the hole in the chasis.
I clamped the hitch onto a floor jack, then rolled it and raised it into position.
Used metal shears to easily cut out the heat shield as per the video.
Your inclination will be the screw the fishing tool provided all the way up the carriage bolt. That won’t work; just screw it on to the tip of the bolt.
I couln’t get the exhaust hangars in place even after lubricating them with wd-40. I dropped the rubber hangars into undiluted liquid car wash soap which made them much more slippery than the wd-40. After that the rubber hangars slipped into place pretty easily-that’s my best tip.
Finding the electric connection plug for the wiring harness was almost as hard as installing the hitch. I was very happy with how the job came out. Good luck.
Ball mount kit arrived quickly (within a few days) upon placing order online. Parts were shipped loose in box and bottom flap on box was open when received. Fortunately, all the parts were still in box and in good condition. Kit includes ball mount hardware I need to pull trailers with different hitch heights.
Great product. Definitely easier with 2 people to lift up the hitch for final installation
I ordered the Ball Mount Kit for 2" Hitches. My order was delivered fast, but it only came with one ball where two were specified. George and Paula got on it immediately and I received the missing ball in just 3 days. Nice recovery team! I would have given five stars for the product quality, service, and delivery had it been a complete order from the start, but that said, great service!
This is the one thing I ordered with my hitch, wiring harness, etc. that I'm not sure about. Either the balls are slightly too small or the pins are too small for the hitch I have, so when I haul something, it makes an almost rattling noise. Super annoying! I also haven't needed both size drops. But if I ever do, I'm sure I'll be glad I got it.
My experience sucked with this company. I ordered 1 unit but received and was billed for 2 units. I have 1 car with a hitch and would never need 2. I then attempted to get a refund and return the extra unit I was billed for. Unfortunately. the cost to return the unit by ANY method of shipping available was more than the cost of the unit itself.
Will never use this site again.
Great products, Fantastic service and very fast shipping. We are already placing another order.
Ramon
8/11/2023
Everything is working Fine.
I probably overkilled with tis kit, but I am ready for just about anythng now! I was somewhat surprised to find a 250 ft-lb requirement on the ball! Best I could do was use my 18" pipe wrench and stand on the thing- I probably got to 250- or more!
Good value and having the 2 options saved us because the higher rise ball mount did not work with the accessory bike rack and I was able to go with the lower rise instead.
Superb quality and this accessory completes the trailer hitch by allowing me to haul anything from moving trailers to boats. Will buy from here anytime I need extra accessories. Thank you.
This kit is exactly what I needed. I have two trailers one with a 1 7/8 and the other is 2. This allows me the option of just swapping out hitches. The bag also can hold the 7 pole to flat 4 adapter.
Ball mount and hitches have held up gre at
Solid piece of hardware! On my '06 Outback the install was easy and Subaru knew their drivers would want to do this. Stood up to towing canoes in and out of a backcountry trail and I've let friends borrow this set as well. Good product, no complaints so far.
Could not have been easier. I was able to find what I needed by looking at just the items for my vehicle. Item arrived days ahead of schedule. Items were well packed. Tongues appears to be well constructed, but they were made in China. Sturdy pins and a handy bag with enough room for your wrench besides. Very happy with my purchase and good to do business with a local company, too.
Pros
Well built
Cons
Probably cheaper soemwhere else
Rather pay 80 and it come with a j pin, then e trailer wouldve no doubt be top dog on hitch deals.
Great kit! I feel prepared for whatever towing situation I fun into.
You will not find one of these hitch set ups at a retailer for the price of this kit.
The customer service was polite and knowledgeable in their recommendations. The package delivered complete and without incident and install was a breeze. the only reason for the four stars instead of five is for the competitiveness of their pricing.
Adolfo
11/1/2018
Has held up very well and have had no issues at all.
Thank you for the informative video instructions as well as helpful / honest reviews to research prior to making the purchase. I do not have anything to add that has not been covered in the reviews. Here is a recap of my experience that has been consistent with others.
1. Box was received with the driver side of the hitch pushed out. Only minor scratches which you can not see when installed and it did not impact the installation. Wrapping each end would probably be a good idea as stated in other reviews.
2. Removing 14 years of rust was the hardest part of the install (from the passenger side holes). Total time was approximately 1 hour as others have experienced. I used the bolts from the factory tie hook to work out the rust using 1/2" round wire brush attached to a cordless drill along with a full can of WD-40.
3. Installation of the hitch took about 30 minutes with assistance of a foot stool.
4. Plug-n-play electrical connector took about 10 minutes after watching the video.
5. Perfect fitment, fast delivery, easy website ordering experience and follow-up status notifications, and I can not be more pleased with the cost being under $200 for a DIY project.
I required this setup to tow a ~1,000 lb motorcycle trailer with a ~1,000 lb motorcycle next week and my Honda has a 3,500 lb towing capacity.
Thank you etrailer.com!
Shipping - The hitch, ball mount-kit, wiring harness, and brush all arrived quickly in a single, heavy-duty cardboard box. The packaging was excellent! There had to have been a hundred heavy-duty staples used to secure everything.
Installation - The video and paper instructions were spot-on and made the install much more straight forward. For two non-mechanics, it took us about 2 hours from the time we pulled the car into the garage until all the tools were put away to install the hitch, wiring harness, and mount the balls on the sleeves. We did not lift the car might have made it a little easier but totally doable. The only actual difficulty we had was pulling the rubber muffler mounts off. A little lubrication helps. Reinstalling them is easier.
Dan S.
11/8/2018
All items continue to work well with no issues.
Solid equipment and provides useful versatility to meet all my towing needs.
This product was delivered in a timely manner and in my opinion is a great value for the money. I purchased the two hitch ball mount for three reasons, 1) price, 2) versatility, and 3) the storage pouch that allows me to keep all pieces in one space without moving around in the truck.
I had one problem, one of the balls as originally provided was the wrong capacity because it had been mislabeled. However, a phone call to etrailer quickly resolved this issue and the correct ball was shipped.
T. A.
12/13/2017
I am still happy with the purchase.
DON'T KNOW IF I WILL NEED THEM BUT I HAVE IT JUST IN CASE AND THE BAG CAME A FEW DAYS LATER. LOOKS LIKE THEY WILL WORK WELL
The 3rd piece of a great package, tow hitch, wiring harness, & ball mounting kit. I have two trailers, that ride at different heights. This really completed the install nicely. Everything went seamless from order to delivery. Installed on 2014 Tacoma.
Michael G.
8/11/2015
Still pulling, very pleased.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Steve
1/16/2024
I use the hitch often to launch my boat. Excellent product and having the bag makes it easy to keep it all together as I’m prone to misplace things.