Will Draw-Tite 75122 Fit Standard Body 1990 Chevy Astro Van
Question:
hitch #75122 will this fit a standard size astro van mine is not the extened version everyone that makes class 3 hitches only are made for the extended ones very few of those were made how come
asked by: Dan S
Expert Reply:
The Draw-Tite # 75122 only fits the extended body. Two out of the three hitches made for your Astro actually fit the standard body so I'm not sure what you mean. You can use the etrailer # e69KR or the Curt # C13035. Both of these are Class III hitches with the only real difference being the finish. If you want the matte black finish choose the etrailer and if you prefer the glossy finish get the Curt.
If you plan on towing you will need the Tekonsha # 18252 for wiring. This will provide you with a 4-way to power your trailer's signal lights. Then for a ball mount check out the etrailer Ball Mount Kit # 989900.
I have attached some review and installation videos below for your reference.
Products Referenced in This Question
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Which Hitches are Made in the USA
- Q&A: What is the Difference Between the Draw-Tite and Reese Versions of Dual Cam Sway Control
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Recommended Trailer Hitch Receiver and Ball Mount for 2002 Chevrolet Astro
- Q&A: Will the Draw-Tite Trailer Hitch Fit with Spare Tire On a 2000 Chevy Astro with Standard Chassis
- Q&A: Availability of Replacement Trailer Hitch Mounting Flanges for Rusted Hitch
- Q&A: What do the Two Sets of Hitch Weight Capacities Mean, Weight Carry and Weight Distributing
- Q&A: Trailer Hitch Fit for 1999 Chevy Astro Cargo Van
- Q&A: Getting Replacement Hardware For Curt Trailer Hitch Part C13035
- Article: Rust Prevention
- Article: RV Sway Control, Stabilization, and Suspension Enhancement