Parts Needed For Towing a Trailer With a 2022 Chevrolet Blazer

Question

Question:

I need to add the parts to my 2002 Blazer so that I can tow a trailer. The manufacturer couldn't provide me the parts as they are on backorder. Can you help me find everything I need?

asked by: Ray W

0

Expert Reply:

First you will need the etrailer Trailer Hitch Receiver # e36YR for your 2022 Chevrolet Blazer. This receiver will fit all trim levels with the exception being the premier. It is rated for up to 750lbs of tongue weight and a trailer weight up to 5,000lbs. If you are using a weight distribution hitch the capacity increases to 6,000lbs. Be sure to verify with your Chevrolet dealer exactly how much your Blazer can handle and use the lower of these sets of numbers.

For the wiring I recommend the T-One Vehicle Wiring Harness # 118276 as this will connect directly into your factory harness. Instead of using the included 7-way I recommend the 7- and 4-Pole Trailer Connector Socket # HM40975 as it allows you to choose from either the 7-way or 4-way. If your trailer has electric brakes you will be able to use the Curt Echo Wireless Trailer Brake Controller # C51180 to control the trailer brakes from your smartphone. This way you will not have to run additional wiring or drill holes into your dash for a controller.

The etrailer Ball Mount Kit # 989900 will allow you to choose from 2 different height ball mounts to best level your trailer. You can then mount either the 2" or 1-7/8" hitch ball that comes with the kit to match your trailer coupler.

expert reply by: Bud M

0

Answer 1

Yes, we have our etrailer Trailer Hitch Receiver #e36YR which fits all trims on your 2023 Chevrolet Blazer besides the premier trim. I prefer this receiver over others as it uses the matte black finish which best accents the OEM fascia trim and I…

view full answer...

Answer 2

I have the perfect roof rack for your 2023 Chevy Blazer. It mounts directly to the side rails and is compatible with your Thule Top Ride item #TH75JV. You will want the roof rack by Rhino Rack and it includes the following parts: Rhino-Rack Vortex…

view full answer...

Answer 3

Congrats on the new suv! Yes, there is a hitch for your 2023 Chevy Blazer. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item #76023.This hitch is custom fit and bolts to your Blazer with included hardware. I really like this hitch because it…

view full answer...

Answer 4

Yes we have the etrailer hitch part #e36YR that is a confirmed fit for your 2023 Chevy Blazer. It install easily and has great towing capacities. If you need trailer wiring too the Tekonsha kit part #118720 is the easiest to install and has the most…

view full answer...

Answer 5

The Curt trailer hitch part #C13418 is your best option for a trailer hitch for towing. This USA assembled hitch is very easy to install, has plenty of towing capacity and installs behind the rear bumper panel of your Blazer (see picture) so it's…

view full answer...

Answer 6

We actually had the opportunity to install the Draw-Tite Max-Frame Trailer Hitch Receiver #76021 on a 2018 Jeep Renegade Latitude and found from the ground to the top of the receiver tube is 10-1/4". Since this is a 2" receiver we can…

view full answer...

Answer 7

For your 2018 Jeep Renegade the Draw Tite hitch part #76021 that fits it hangs below the rear bumper as there would be no way to mount it through the bumper. I attached a picture that shows how it will look when installed. I also attached an install…

view full answer...

Answer 8

The only difference between the Curt and etrailer trailer hitches that fit your 2023 Chevy Blazer is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that…

view full answer...

Answer 9

The best class III hitch for your 2023 Chevy Blazer is going to be the etrailer Trailer Hitch Receiver item #e36YR. This hitch is custom fit and bolts directly to your Blazer with included hardware. I really like the etrailer item #e36YR hitch…

view full answer...

Answer 10

Yes, for your 2020 Chevy Blazer we have the Curt Class III Trailer Hitch Receiver #C13418, which is a perfect fit and will line right up to existing holes in the frame rails for a simple bolt-on, no-drill installation. It will provide you with a…

view full answer...

Answer 11

Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part #C13418, will fit your 2022 Chevrolet Blazer. It is a Class III hitch receiver with a maximum tongue weight of 750 lbs and a maximum gross trailer weight of 5,000 lbs. I…

view full answer...

Answer 12

Yes, there is a hitch for your 2023 Chevy Blazer Premier that mounts behind your rear bumper. It is the Draw-Tite Max-Frame Trailer Hitch Receiver item #76023.This hitch is custom fit and bolts to your Blazer with included hardware. The Draw-Tite…

view full answer...