Longer Yakima Hitch Bolt Recommendation to go From 1-1/4 in Hitch to 2 in Hitch
Question:
I have an older Yakima ROC4 bike carrier. Unfortunately my new car only allowed a 1 1/4 hitch. My ROC4 is 2. I bought an adapter that allows my hitch to accept 2inch I only use two bikes at most so the weight penalty is not a problem but the bolt on the Yakima ROC4 is too short to work with the adapter. Is there a longer bolt that will work with the ROC4 and a 1 1/4 to 2inch adapter?
asked by: Tom
Expert Reply:
I spoke to my contact at Yakima and he said that you would need a Replacement Mounting Hardware Hitch bolt # Y8890176. He said this will give you the additional length you need from your hitch bolt to work on a 2 inch hitch adapter.
You should note that anytime you use any type of hitch adapter or extender you effectively cut the capacity of the hitch in half due to the increased leverage and moving parts. So you should consult your owners manual to determine the capacity of your hitch and be sure not to exceed half of that with your rack and bikes.
Products Referenced in This Question
Replacement Anti-Rattle Hitch Bolt for Yakima BigHorn, FlipSide, DoubleDown, and SwingDaddy Racks
- Accessories and Parts
- Hitch Bike Racks
- Anti-Rattle Parts
- Hardware
- Bolts
- BigHorn
- DoubleDown
- FlipSide
- SwingDaddy
- Yakima
more information >
Product Page this Question was Asked From
Replacement 2" Anti-Rattle Hitch Bolt Assembly for Yakima Bike Racks and DryDock Load Assist
- Accessories and Parts
- Hitch Bike Racks
- Anti-Rattle Parts
- Hardware
- Bolts
- BackSwing
- BigHorn
- FullSwing
- KingPin
- SlickROC
- Yakima
more information >
Continue Researching
- Shop: Replacement Anti-Rattle Hitch Bolt for Yakima BigHorn, FlipSide, DoubleDown, and SwingDaddy Racks
- Q&A: Differences Between # Y8890176 and # Y8890200 Bolts
- Shop: Replacement 2" Anti-Rattle Hitch Bolt Assembly for Yakima Bike Racks and DryDock Load Assist
- Q&A: Is a Longer Threaded Hitch Bolt Available for Swagman XC Bike Racks and a 2-1/2 Inch Trailer Hitch
- Q&A: Replacement Hitch Bolt for Yakima Holdup Bike Rack (All Generations)
- Q&A: Size Wrench Needed for the Yakima Replacement Hitch Bolt part # Y8890176
- Shop: Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks and DryDock Canoe Carrier
- Shop: Trailer Hitch
- Shop: Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS)
- Shop: Replacement Mounting Hardware for Yakima HoldUp Plus 2 Adapter
- Q&A: Torque Spec for Installation of Yakima Exo SwingBase Swing Away Hitch Extender Tongue
- Q&A: Replacement Hitch Bolt for Yakima Exo System
- Q&A: Replacement Hitch Bolt For Yakima BackSwing Swing Away Adapter
- Article: Determining Trailer Tongue Weight
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: Best Bike Racks for Electric Bikes
- Article: How to Attach a Cargo Carrier to a Roof Rack