Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
(50 reviews)
Price: $24.04
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
Retail:$26.10
Our Price: $24.04
You Save: 8%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (50)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your electric brake controller
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible time-delayed brake controllers: Draw-Tite Activator I (5100), Draw-Tite Activator II (5500), Draw-Tite Activator III (5520) and Tekonsha PowerTrac (39523)
- Compatible proportional brake controllers: Tekonsha Prodigy (90185), Tekonsha P2 (90885), Tekonsha P3 (90195), Tekonsha Primus IQ (TK90160) and Tekonsha Voyager (39510)
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
This adapter plugs into the 4-pin connector on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal.
To install your electric brake controller you need to connect the wiring of the controller to your vehicle. Certain manufacturers offer pre-wired options, typically known as tow packages, wherein these wires are run for you from the dash to the trailer connector on the back of your vehicle. Often, a brake controller wiring harness is included with your tow package. This harness plugs into a port beneath your dash and connects to the four wires of the brake controller. If, however, you have a brake controller with a plug in place of the four loose wires, you can use the Tekonsha adapter.
This adapter requires no hardwiring. It is designed to plug directly into your electric brake controller for the simplest installation possible. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time and securely stow it away.
308200 Tekonsha Brake Control Wiring Adapter with 2 Plugs
Replaces Tekonsha 3045 and 3082-PItem # TK93VR
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2024 Dodge Durango with factory Tow Package
- 2011 - 2021 Jeep Grand Cherokee with factory Tow Package
- 2022 - 2022 Jeep Grand Cherokee WK - old body with factory Tow Package
- 2022 - 2024 Jeep Grand Wagoneer without factory Tow Package
- 2023 - 2024 Jeep Grand Wagoneer L without factory Tow Package
- 2017 - 2024 Chrysler Pacifica with factory Tow Package
- 2022 - 2024 Jeep Wagoneer without factory Tow Package
- 2023 - 2024 Jeep Wagoneer L without factory Tow Package
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - TK93VR
Average Customer Rating: 4.6 out of 5 stars (50 Customer Reviews)
Install your electric brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in harness beneath your vehicle's dash.by: Lauren 02/09/2024
2022 Jeep Wagoneer
My car came with a tow package but without trailer brake control and so it had a plug to connect the controller to. This plugged into that and voila. I had a place to connect the trailer brake controller. I know little to nothing about cars and was able to do it myself. 10/10 would recommend. Saved me a custom job bill.
by: Joseph 02/10/2024
its the simple way to add the brake controller. Just plug and play. No splicing and discing of the of the vehicle wiring harness.
by: Tom M06/23/2023
2023 Jeep Grand Cherokee
I recently purchased a new Jeep Grand Cherokee L with the trailer tow package. I was looking for a replacement adapter for my Tekonsha Primus IQ. This particular wiring adapter was not a guarantee fit, but after plugging it in to the harness on my new vehicle it works fine. So, based on my experience, this adapter does properly work with the tow package wiring on 2023 JGCLs.
by: Wayne03/14/2024
2021 Jeep Grand Cherokee
Easy ordering, fit perfectly on my 2021 Jeep Grand Cherokee... So much valuable info on etrailer, and very reasonable shipping to Canada !
by: Jeffrey 07/10/2022
Jeep is not making brake controllers or wiring adapters for my vehicle. Glad my RV dealer pointed me to check with Tekonsha and etrailer.
This wiring adapter will make the installation of the brake controller much easier and more reliable than splicing wires. Look on YouTube for an installation video.
by: Alex 01/14/2023
Great product. Easy fit. Makes installation real easy
Alex M.
1/15/2024
This is a great product, easy to use. The adapter specifically for my vehicle made it all easy to use and easy to install. Highly recommended. The dual trailer option is very handy.
by: John10/28/2023
I ordered a wiring harness for a trailer brake controller and paid for quicker delivery. I received a clear lens cover for an interior dome light. Customer Service did answer the phone and said they would try to send the right part… but the parts delay makes a trip with the trailer impossible.
by: Jose12/11/2023
Besides receiving my product damaged, and three days late, I am unclear as to why the individual who packaged my product didn’t replace the box. I hope you have a wonderful Christmas and a happy new year.
by: Chas06/17/2023
Plug and play with proper wiring harness made installation a snap. Break controller worked great on our Jeep Grand Cherokee. I highly recommend.
by: Tom 07/31/2023
2022 Jeep Wagoneer
Make sure you get the plug in wire adapter but it was already part of the purchase
by: Craig 02/13/2024
Jeep
Worked perfectly with our Jeep.
by: Tom 02/22/2024
Works great, fast delivery!
by: Jeff 10/13/2023
Jeep Grand Cherokee
Perfect fit for my grand cherokee.
by: Martin 01/10/2023
0 0
Plug and play as advertised. The wires are nicely protected. I mounted my brake controller under the dash, just below the ignition. I had plenty of wire.
by: Ricky 05/22/2023
2022 Jeep Wagoneer
Great service towards parts being processed and sent out in a timely manner.
by: Zo O03/13/2023
Reliable, works as advertised.
by: Mike09/18/2022
Great experience, easy installation. Shipping to canada right now was a 3 week ordeal but overall that is the only drawback. Yes, I would buy from etrailer again.
by: Jeremy 07/28/2022
Worked great to hook up my brake contro ller.
by: Patrick 07/30/2022
Plug and play in my 2022 Wagoneer
by: John09/27/2022
Easy install
by: Michael 10/05/2022
Fast delivery and this made install eas y.
by: Mark06/08/2022
2018 Jeep Grand Cherokee
Plug and play
by: Steve02/10/2024
by: William 02/03/2024
25
50
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Location of Brake Controller Connector Under the Dashboard of a 2017 Chrysler PacificaThere is a connector under the dash to install an electric brake controller in your 2017 Chrysler Pacifica. From what I found it is above the steering column near where it goes through the firewall and has a green cover over the connector. The correct harness to use is # TK93VR. This is the same harness that fits the Durango and Grand Cherokee.
view full answer... - Correct Plug In Adapter Harness For a 2023 Jeep Wagoneer Using A Tekonsha Voyager Brake ControllerThe Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers 3045-P you're referring to has actually been discontinued and replaced by the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers # TK93VR. With that said, the new # TK93VR harness will work with your 2023 Wagoneer as well as your Tekonsha Voyager brake controller.
view full answer... - Recommended Brake Controller Plug-In Adapter For 2014 Jeep Grand CherokeeYou are correct. If you have a 7-way trailer connector on your 2014 Jeep Grand Cherokee, the brake controller adapter you need is part # TK93VR. One end plugs into the back of the controller and the other plugs into the harness on your Jeep.
view full answer... - Where is the Brake Controller Port on a 2015 Jeep Grand CherokeeThe picture you attached is the OBDII port and will not connect with the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # TK93VR. The port that you will need to find will match the grey connector on the adapter harness. If you take a look at the 3:00 mark in the attached review video, the location of the plug you will need to access will be shown.
view full answer...
- Availability of Tekonsha Brake Controller Install Harness # TK93VR for 2015 Jeep Grand CherokeeWe do carry the brake controller install harness part # TK93VR which does fit your 2015 Jeep Grand Cherokee. It's available at the product link down below. I attached an install video for this for you to check out as well.
view full answer... - Location of Factory Trailer Brake Controller Plug on a 2012 Jeep Grand CherokeeIf you look at the instructions for harness # TK93VR you will see that the connector is actually located further to the left than you might think. It is actually just about directly above the emergency brake pedal. There should be another larger connector right next to it. If it is not there then it is possible that it is behind the kick panel forward of the door.
view full answer... - Accessing 2014 Grand Cherokee Electric Brake WiringYou can cut the zip tie that is holding the factory brake controller connector for your 2014 Jeep Grand Cherokee to make it easier to access. If you wanted to make the connection to the # TK93VR and then use another zip tie to put it back up where it was you certainly could. I attached an install video for this harness that shows it installed on a similar 2014 Grand Cherokee as yours too.
view full answer...
- Wiring Harness Needed for Voyager Brake Controller Installation on a 2011 Dodge Durango CitadelThere are two ways to get your brake controller connected. You will want to use # TK93VR and plug it directly into your brake controller, then the other end will get connected to the factory prep connector under your dash on the driver side. If your brake controller just has three wires hardwired into the back of it, you can use the same # TK93VR harness and cut the Tekonsha plug off and hardwire it to your brake controller.
view full answer... - Recommendation For Plug-In Wiring Adapter For Brake Controller For 2014 Jeep Grand CherokeeI have exactly what you need. The Tekonsha Plug-In Wiring Adapter, Item # TK93VR, will fit your 2014 Jeep Grand Cherokee with factory tow package. I have attached an installation video for you to check out.
view full answer... - Trailer Brake Controller Connector for a 2022 Jeep Grand CherokeeThe correct brake controller wiring harness depends on which exact 2022 Jeep Grand Cherokee you have. For the WK Old Body style you can use the Tekonsha Adapter # TK93VR for a Tekonsha brake controller. Otherwise you need to hardwire the brake controller to the existing wiring under your driver's side dash.
view full answer... - Connecting Draw-Tite Trailer Brake Controller to a 2022 Jeep Grand Cherokee WKThe Tekonsha 3045-P has been replaced with the Tekonsha Plug-In Wiring Adapter # TK93VR (3082-P). This will allow you to use your Draw-Tite 5535 brake controller on the 2022 Jeep Grand Cherokee WK(old body style). If you have the new body style (WL) a connector has not yet been created. You will not have to have your computer programmed to use the controller. Programming is only needed if connecting a factory controller on your Jeep.
view full answer... - Where is the Best Place to Install a Trailer Brake Controller on a 2014 Jeep Grand CherokeeYou will want to be sure of what is behind that panel before drilling. If you cannot see up there then try feeling around. If you feel any other components or wiring you will want to choose a different location. There is no one place that the control must be installed as long as it is mounted within the parameters specified in the instructions and within easy reach of the driver. The most common places are to the left or right of the steering wheel on the lower dash. Sometimes there...
view full answer... - Does 2014 Jeep Grand Cherokee Come Pre-Wired for Brake ControllerYes your 2014 Jeep Grand Cherokee does come pre-wired for a brake controller which will make installing one very simple. The Tekonsha BRAKE-EVN part # TK63VR is a really great option that gives you the proportional trailer brake control and reliability of the expensive controllers at a much better price. To install it you just need the harness # TK93VR and you'd be set.
view full answer... - Brake Controller Install Harness for 2017 Jeep Grand CherokeeIf you install a brake controller like the Tekonsha BRAKE-EVN # TK63VR in your 2017 Jeep Grand Cherokee with the brake controller install harness part # TK93VR you would not need to do any type of programming to the vehicle. It would work as soon as it's plugged in. I attached an install video for this controller in a very similar 2017 Jeep Grand Cherokee for you to check out as well.
view full answer... - Recommended Budget-Friendly Brake Controller for 2020 Jeep Grand Cherokee With Factory 7-WayYou can definitely get a really good brake controller without spending a fortune for your 2020 Jeep Grand Cherokee, and my favorite budget-friendly controller is the Brake EVN # TK63VR. I really like this controller because is a great value due to its combination of quality and cost-effectiveness. The Brake EVN is going to give you smooth braking and like other proportional controllers, levels automatically and has a bright display that is simple to read and understand. To install the...
view full answer... - Recommended Inexpensive Electric Trailer Brake Controller for 2011 Jeep Grand CherokeeThe best bang for your buck electric trailer brake controller for a 2011 Jeep Grand Cherokee will be the Tekonsha BRAKE-EVN Trailer Brake Controller part # TK63VR which has a proportional design (best), boost settings for increased braking aggression, and safeguards to protect the vehicle. If you have the factory tow package you can use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers part # TK93VR for a plug-in installation.
view full answer... - Installing the Tekonsha Primus IQ Brake Controller on a 2013 Dodge DurangoThe correct plug-in brake controller adapter that you will need for your 2013 Dodge Durango and your Primus IQ brake controller is part # TK93VR. We have installed the Primus IQ on a 2013 Durango using this harness, so I attached the installation video for you to check out. The factory brake controller port is located under the dash, to the left of the steering column by the emergency brake pedal.
view full answer... - How To Use the Factory Brake Controller Wiring Harness on a 2019 Jeep Grand CherokeeCorrect, all you will need to do to install a brake controller on your 2019 Jeep Grand Cherokee is attach the factory brake controller pigtail that came with your vehicle to the one that comes with the brake controller. There will be blunt cut ends on each harness so once you strip some of the jacket off, you can then attach them with the included butt connectors. If you don't already have a brake controller, I recommend the Tekonsha Primus IQ part # TK90160. The Primus IQ is an excellent...
view full answer... - Recommended Trailer Brake Controller for 2015 Jeep Grand Cherokee Towing 2,800 Pound CamperI completely understand your feeling of being overwhelmed by the sheer amount of quality proportional brake controllers available, along with your desire to obtain a quality unit that will outlast your Grand Cherokee without having to pay for extra features you don't need. You narrowed down your search to a really good group, and between those option I highly recommend the Tekonsha Primus IQ Brake Controller # TK90160. This controller has been around for a long time, which only speaks...
view full answer... - Can Tekonsha Primus IQ be Mounted on Floor of 2014 Jeep Grand CherokeeWhile I'm not 100 percent certain which brake controller you are referencing, though from what I can tell it is the Tekonsha Primus IQ Trailer Brake Controller # TK90160. If you'd like you can have it mounted on the floor, but you do need to make sure it is perfectly horizontal at all times, as you can see from the cut out I added of the linked instructions of this controller. That can be quite difficult to do on the floor unless it is somehow secured there so while you can do this, I...
view full answer...
- Brake Controller Plug Location on 2021 Jeep Grand CherokeeThe factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. To install the Tekonsha item # TK90160 Primus Brake Controller, you were looking at on your Grand Cherokee you'll need the Tekonsha item # Tk93VR wiring harness. One end plugs into the controller, the other end into the factory connector under the dash.
view full answer...
- Recommended Brake Controller for 2020 Chrysler Pacifica with Factory 7-WaySince your 2020 Chrysler Pacifica came with a factory 7-Way plug there is a factory port under the dash to plug in a brake controller adapter so the easiest way to install a brake controller (other than the blue tooth options like you mention) is the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 with the brake controller adapter part # TK93VR. The Prodigy P3 has a nice LCD display screen that has storable settings to tow more than 1 trailer without resetting the boost each time....
view full answer... - Wiring Adapter to Install Prodigy P3 Brake Controller 90195 in 2014 Dodge Durango with 7-wayWe have just what you need to install your trusty Prodigy P3 # 90195 in your new 2014 Dodge Durango. Since your Durango has the factory tow package with 7-way all you need to install your P3 is the wiring adapter # TK93VR. This custom-fit wiring adapter plugs in between the back of the P3 and the under-dash connection port. We made a video showing the installation in your same vehicle; simply click on the video link provided.
view full answer... - Brake Controller Wiring Harness Recommendation for 2015 Dodge DurangoThe 7-way of your 2015 Dodge Durango does have the wiring complete for a brake controller. The two pins that aren't being used should be the reverse light circuit (center pin) and the 12 volt accessory circuit (1:00 pin). Neither of these are needed for wiring in a brake controller so all you need is the # TK93VR that you referenced plus a brake controller. For a brake controller I would recommend the Prodigy P3 Brake Controller part # 90195. This is our best selling brake controller...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Michael B
Written by:
Sabrina W
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jeffrey
7/11/2023
Working as designed. Happy with its performance