bing tracking image
  1. Accessories and Parts
  2. Seaflo
  3. Battery
  4. Disconnect Switch
Seaflo Battery Disconnect Switch for Boats and RVs - On/Off - 900 Amps

Seaflo Battery Disconnect Switch for Boats and RVs - On/Off - 900 Amps

Item # SE29VR
Retail:$26.39
Our Price: $19.94
You Save: 24%
Accessories and Parts
Shipping Weight: 0.57 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Prevent power drain in your boat or RV when you're not using it by isolating the battery with this battery disconnect switch. On/off positions for easy operation. Recessed or surface mount. Remove panels to route wires in any direction. 48V. 1-800-940-8924 to order Seaflo accessories and parts part number SE29VR or order online at etrailer.com. Free expert support on all Seaflo products. Great prices and Fastest Shipping for Seaflo Battery Disconnect Switch for Boats and RVs - On/Off - 900 Amps. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (24)
  • Q & A (0)
  • Photos

Seaflo Accessories and Parts - SE29VR

  • Battery
  • Disconnect Switch
  • Seaflo

Prevent power drain in your boat or RV when you're not using it by isolating the battery with this battery disconnect switch. On/off positions for easy operation. Recessed or surface mount. Remove panels to route wires in any direction. 48V.


Features:

  • Disconnect switch safely isolates the battery in your boat or RV to prevent power drain
  • ON and OFF positions for easy use
  • Customizable installation - can be recessed or surface mounted
    • Low-profile design when recessed mounted
    • Removable panels allow routing of wires from any direction
    • Connects to either positive or negative wiring
  • Bottom cover insulates the bottom of the switch
  • ABS plastic is UV resistant and long-lasting


Specs:

  • Overall dimensions: 2-7/8" long x 2-7/8" wide x 2-15/16" tall
  • Maximum power draw at 48V DC: 900 amps
    • Continuous duty: 300 amps
    • Intermittent duty: 500 amps
  • 4-Year limited warranty


SFCBS-300-202 Sea Flow Battery Disconnect Switch for Boats and RVs - 2 Position - 48V

Replaces Seaflo SFCBS-275-201





Customer Satisfaction Score:


Customer Reviews

Seaflo Battery Disconnect Switch for Boats and RVs - On/Off - 900 Amps - SE29VR

Average Customer Rating:  4.7 out of 5 stars   (24 Customer Reviews)

Prevent power drain in your boat or RV when you're not using it by isolating the battery with this battery disconnect switch. On/off positions for easy operation. Recessed or surface mount. Remove panels to route wires in any direction. 48V.

by:

This battery disconnect switch is of good quality and works as designed. The dimensions were as advertised. I recently installed it on my 2022 Gulfstream travel trailer inside the trailer's cargo area. I mounted it to a vertical wooden support post. I function tested it at least 10-15 times and it performed without any issues. You cant go wrong with this particular switch or etrailer. I highly recommend both!



by:

This battery disconnect was just what I was looking for. I mounted to the trailer frame with some - #10 bolts and 3x strength velcro. Then clipped the existing + battery wire and added some ring terminals to fit the disconnect's studs. Works like a charm. Seems like a solid unit.

Andrew

11/14/2023

The battery disconnect is still in service and operating well. The only issue is due to operator error e.g., one needs to remember to actually twist the dial if you want the battery disconnected. I hang my head in shame... :



by:

Received order as placed & quick. Quality looks top notch & I anticipate my DYI project to update my camper to lithium battery with all associated parts will go well now.



by:

I won't have to pull the fuse to my battery now during storage.



by:

Solid construction, easy to install and switch has good detents so you can feel that it's in the desired position.



by:

The product appears to be well-constructed. Etrailer's ordering and shipping were fast and easy. I do wish the mounting hardware would have been included.



by:

Works as described. Used to disconnect battery in camper which had enough current draw to discharge battery in a week or two during storage. I have ordered many items over several years from trailer. I appreciate their quick service and expertise.



by:

The were very helpful and shipped fast.



by:

Nice simple battery disconnect switch.



by:

easy to use and works as advertised.



by:

Very quick and excellent service!



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


24
24

See what our Experts say about this Seaflo Accessories and Parts

  • How to Fix Backfeed From Trailer Battery and Solar Controller on 2024 GMC Sierra 2500
    Installation of the # RM-790 will take care of that problem you're having. I would wire it on the trailer side at the battery rather than mess with the wiring on your 2024 Sierra 2500. The other solution is to follow the GM note and add a disconnect between the battery and solar controller like other trailer manufacturers have started to do. If you want to go that route you can use the # SE29VR.
    view full answer...
  • Parts Needed To Install a 12 Volt Battery To an Off Road Trailer For Lighting
    Frist you will need a Battery # BRW34FR. This is a deep cycle battery which is designed to be drained and recharged as needed. I recommend using the TorkLift PowerArmor Solar Single Locking Battery Box # TLA7720RS to secure the battery to your off road trailer. This steel box will protect the battery and includes a small solar panel to help maintain the battery power while the trailer is unplugged. You will be able to disconnect it from the lighting using a Disconnect Switch # SE29VR which...
    view full answer...
  • Everchill Model WD-282FWDC-B-6 RC refrigerator
    You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option is to install the Seaflo # SE29VR battery disconnect switch. This will cut off all 12-volt power to your RV and prevent phantom energy suckers (like radios, TV's, gas/smoke detectors) from draining your battery while in storage. I have been using this...
    view full answer...
  • Outdoor Power Switch for Buyers Products Flood Lights
    The Buyers Products # 3371492196 LED flood light does not have a built-in on/off switch. I would use the Seaflo # SE29VR Battery Disconnect switch for my outdoor switch, then to avoid drilling I would pick up some 3M heavy duty automotive mounting tape (at auto supply store) to mount that to your trailer frame. I use this same switch on my outdoor camper battery case.
    view full answer...
  • Can The Seaflo Battery Disconnect Switch # SE29VR Be Mounted To a Wood Surface?
    The Seaflo Battery Disconnect Switch # SE29VR can be mounted to your wooden frame surface. It has a bottom cover to protect the surface you are mounting it to and the switch does not require any grounding.
    view full answer...
  • Battery Disconnect Switch Wiring For a RV Trailer Breakaway Brake System
    When a trailer manufacturer wires in a Disconnect Switch # SE29VR the disconnect will only break the 12 volt connection for lighting, fans and other 12 volt accessories inside the trailer. It will still have power on the 7-way connector since the battery also powers the breakaway brake switch and will also send power to smoke and CO2 detectors inside the RV. This ensures the battery is maintained while traveling of your vehicle battery so that there are no issues with the breakaway system...
    view full answer...
  • Battery Disconnect Switch For 12 Volt System
    It sounds like he was referring to either the Seaflo Battery Disconnect Switch with Key # SE73FR or the Seaflo Battery Disconnect Switch # SE29VR. A battery cable like the # DW08755 could be use to connect either disconnect switch near your battery.
    view full answer...
  • Setting Up The Blue Ox Patriot Braking System On A 2018 Chevrolet Colorado
    All you need to set up your Patriot Braking System # BLU37TR on your 2018 Chevrolet Colorado you'll just need to get the wiring kit # RM-152-98146-7 and a 12V Outlet Kit # RM-9332. I've included a video of the install to show you how it all hooks up. To complete your flat tow set up you'll need a baseplate like # e98966, this tow bar # DM9511008 and a battery disconnect # SE29VR. Video links for all of this I've included for you.
    view full answer...
  • Could Seaflo Battery Disconnect Switch part # SE29VR Bulkhead Mount in 3/4 inch Plywood
    The Seaflo Battery Disconnect Switch part # SE29VR was designed to be surface mounted so we don't have exact dimensions it can work with if bulkhead mounted. It is 2-15/16 inch tall though so I don't see why it couldn't be mounted in 3/4 inch plywood.
    view full answer...
  • Where are Seaflo Battery Disconnect Kits Made
    Thanks for reaching out, Paul! All of the Seaflo battery disconnects, including the 900 Amp # SE29VR you're looking at, are made in China. I confirmed this with my contact at Seaflo.
    view full answer...
  • Does The Lippert Power Stance Electric Jack Have A Cutoff Switch To Prevent Battery Drain
    The Lippert Power Stance Electric Trailer Jack w/ 7-Way Plug # LC89VR doesn't have a cutoff switch to fully prevent battery drain, but shouldn't pull enough to kill the battery that quickly. If you're storing the trailer and worried about the battery being dead when you go to pick it up then you can install a disconnect switch like the Seaflo # SE29VR. This is super easy to mount on the tongue of the trailer and prevent battery drain while you're away. I've attached a short video below...
    view full answer...
  • Troubleshooting Jensen Stereo LED Display Faintly Lit When Powered Off
    More than likely the dimly lit display you're seeing is from the voltage taking a while to dissipate. It doesn't take much power for the LED display to show up. Give it a few hours and check again to see if it is still lit. Even if it is, the power draw isn't enough to drain your battery. It may also be from the separate power wire running from the battery to the stereo system for memory. This small amount of power allows your AWM965 to keep the settings, just like the stereo in your...
    view full answer...

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Jameson C
Expert Research:
Jameson C
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Jonathan Y
Video by:
Jonathan Y
Employee Adam E
Video by:
Adam E
Employee Andy C
Installed by:
Andy C
Employee Kevin C
Test Fit:
Kevin C
Employee Sabrina W
Written by:
Sabrina W

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924