Firestone Inflation Valve for 1/4" Tubing
(113 reviews)
Price: $14.54
Firestone Inflation Valve for 1/4" Tubing
Item # F3032-1
Our Price: $14.54
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (113)
- Q & A (0)
- Videos (1)
- Photos
Firestone Accessories and Parts - F3032-1
- Air Suspension Compressor Kit
- Vehicle Suspension
- Valves
- Firestone
This inflation valve - or Schrader valve - connects to air springs and other components that use 1/4" air lines to provide a manual inflation point. Valve includes protective cap to keep out dirt and water.
Features:
- Connects easily to air springs and other components that use 1/4" tubing
- Provides manual inflation point
- Includes protective cap that keeps out dirt and water
Specs:
- Threaded portion length: 3/4"
- Quantity: 1 valve
- 2-Year limited warranty
Note: The construction material of the fittings may vary.
WR17603032 Firestone Inflation Valve for 1/4" Tubing
3032
Video of Firestone Inflation Valve for 1/4" Tubing
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Firestone Vehicle Suspension F3032-1 Review
Today we're going to take a look at the Firestone inflation valve for quarter inch tubing. Now this inflation valve or schrader valve will connect to air springs and other components that use the quarter inch air lines to provide a manual inflation point. This valve is an all brass construction, the valve does include this protective cap that'll screw on to help keep out dirt and water from getting into the valve.A few specs on this, the overall length with the cap on, it'll be right at two inches. The threaded portion length is right at 3/4 of an inch. And this is for a quantity of one valve with the cap.But that should do it for the review on the Firestone inflation valve for quarter inch tubing.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Customer Reviews
Firestone Inflation Valve for 1/4" Tubing - F3032-1
Average Customer Rating: 4.9 out of 5 stars (113 Customer Reviews)
This inflation valve - or Schrader valve - connects to air springs and other components that use 1/4" air lines to provide a manual inflation point. Valve includes protective cap to keep out dirt and water.by: GaryJ12/06/2023
Difficult product to find but etrailer had no issues. Excellent response and support from the sales staff (PaulB).
Great variety of products, pricing, and delivery!
Highly recommend etrailer for your Motorhome products.
Thank you etrailer
by: Sean 03/24/2023
Fits perfectly and easy to install.
by: Bill04/12/2021
These fittings are not easy to find for sale individually.
Mine were badly corroded from winter road salt.
Etrailer had them available at a great price.
Everywhere else that I looked either did not have them at all, or forced you to buy them in a complete kit which was $[XX]-$[XX].
Very happy with my first time purchase with etrailer. Will be doing business with them from now on
by: Zach S06/01/2016
Good description and a quality product at a great price. Everywhere in my area that had these wanted $16 for each but I got 2 on here with shipping for $14. And it got to me quick the shipping was on point. Now my airbag system can run each bag independent of the other like I want.
by: Nate01/06/2017
Simple and fast inflation valves for my air shocks. The fitting is a push to connect fitting for 1/4 in air line. Don't lose the nut though its got the special schrader valve thread that you can not replace with a hardware store nut.
Nate
1/8/2018
Well its been a year and they still work fine, no leaks no trouble inflating and deflating my helper bags.
by: Jack W.04/27/2016
This is what I needed. My onboard electric air pump gave out. Very expensive to replace. I have a portable air compressure and with these in-expensive air valves by Firestone, did the trick! Happy with this purchase.
Jack W.
4/27/2017
They are still working as good as the day I installed them. And again Im happy with this purchase.
by: Lawrence V.09/09/2018
I found etrailer to be extremely helpful in locating and special ordering new fill valves for the air suspension system on my Pleasure Way class B camper (2006 Ford E-350). Efficiency, communications, and pricing could not have been better!
Lawrence V.
9/9/2019
Great - no problems - still works like new!
by: Rich07/28/2019
These worked perfectly when I needed a manual way to add air, in addition to the onboard Airlift wireless air compressor system I purchased from Etrailer. These two items make it easy to control the pressure in my airbags not only while not moving but I can adjust the air pressure in my Firestone Air bags while driving as well. As an added bonus the T connection can be easily removed if needed.
by: Ron J07/31/2023
They are great company and they sent my package on time and or actually before the lady that I worked with. She was an excellent person to work with and call me back every time or May when the product will be here.
by: Bob D. 09/09/2016
Since I replaced the 90 degree valves and air lines on my air bags, thought it would be good to replace these too. They work great and so far haven't had any trouble, such as leaking. Very good quality.
Bob D.
9/9/2017
They are still working perfectly. Very happy I did this.
by: Jerry09/09/2022
Exactly what I needed!
All the air bag fittings and tubing to resolve our trucks leaking suspension air bag, Perfect!
Good price and quick delivery!
by: John05/18/2021
The Firestone Inflation Valve and 1/4" Tubing that I ordered fit perfect and there is no leakage of air in my trucks Air Bags even with many bumpy off road trips. The only issue was the length of time it took to ship to Canada. This was not etrailer’s fault as parts were held in Post Office and then at Border Crossing. I will assume because of the Covid 19 Pandemic
by: Billy09/14/2018
I needed these parts because my air hose was severed when I had a blowout in my motor home. The Firestone air hose tubing was back ordered and unavailable so I went to a local RV repair shop and they gave me some surplus tubing. The union connector saved the job because once it is securely attached to the 1/4" tubing it can also be detached. I cut the surplus tubing to the length needed for the job and attached the union connector and inflation valve. When I inflated the line, I immediately heard the sound of air escaping. I discovered some holes in the original line which, fortunately, were very near the union connector. I was able to disconnect the union, cut out the leaking hose and reconnect. It was a much tighter than I wanted, but it worked!
by: Sean.S03/16/2015
I needed replacement air valves for my Hellwig towing airbags on my truck. Looked all over town and on the Internet. The valves are of better quality then what came with the airbag kit. Only place that had them was Etrailer and to my surprise were well priced. Easy to place the order and showed up on my doorstep a couple days later. I am pleased with Etrailer.com and will buy from again.
by: Charles04/02/2022
Valves are working but I had a problem with the valve stem on both of the Shrader valves. When initially installed both valves leaked at the valve stems, checked and tightened the valve stems but they still leaked. Purchased new valve stems, installed, and there were no leaks. The new valve stems that I purchased from an auto parts store looked better than the ones that came with the Shrader valves. There was no leaking where the 1/4 inch tubing was inserted into the Shrader valve so that worked well.
Jenny N.
4/11/2022
I will have our Customer Service team reach out to you.
by: Gene11/13/2016
I purchased this set of Schrader valves for my air ride bags on my F250. I easily installed them through the bolt holes of my rear license plate frame. I used a 9/16" drill bit to widen the holes on my license plate to fit the stems. The easy hose attachment takes less than a second to remove and then attach the valves to your 1/4 air hose. Well made. The caps are extra deep and come with a built in valve removal tool.
by: Don L09/07/2017
My install by me was Bigwig air bags by Hellwig.
Vehicle is Titan XD Diesel. The push to fit Schrader{inflation} valve from Hellwig are prone to leaking if your airline fit is not just so. Even after cutting the airline a number of times and blowing it out with air. Exterior threads on valve don't hold up to an airjack for inflation without thread damage. Valve from etrailer is a solid professional inflation valve. Had I known I would have spent the money for the etrailer valve. I have 42 years in trucking and my upcoming report to Hellwig won't win me any friends with them.
by: Ryan 05/08/2021
These are much better then the ones that come with the Air Lift Load Lifter air spring kit.
by: Stephen 05/14/2023
Despite me not knowing the bag manufacture or the tubing size - James nailed it. Thank you.
by: Carlan M07/15/2013
These valves are much higher quality than the ones provided with my Firestone Sport Rite shocks. The original valve threads stripped out during installation and the dust caps did not fit very well.
by: Dan 11/22/2022
Genuine firestone part. In stock to boo t.
by: Roy E.05/04/2018
After ordering the same part from another company I cancelled after 4 weeks and ordered it from etrailer. It took the other company 2 weeks to deliver the wrong part. They told me they would expedite a replacement. It took another 2 weeks. etrailer only took a few days to deliver. They kept me updated on the order and shipment and took the time to send me an email to make sure I WAS SATISFIED. Great customer service! They have won me over as a customer!
by: JD05/08/2017
Found this product on line priced anywhere from $5.25 to $80.00. Etrailer has always been the best price and exceptional service so there was no reason to look elsewhere. Installed in about 3 minutes.
by: DC12/24/2014
The product functioned as described and fixed the leak on the 1/4-inch line serving my air suspension. Although it has only been installed a few days, it appears to be quality made. I anticpate years of service. My only complaint is that the treaded portion was not quite as long as that of the part it replaced. That said, it was adequate for the job & I am very happy.
by: Jerald. D06/09/2017
This was a great hook up for my air bags. A lot easier than the original part witch was a compression fitting. Just push on and ready to air up!
25
113
Show More Reviews
See what our Experts say about this Firestone Accessories and Parts
- Thread Dimensions of Firestone Inflation Valve # F3032-1The Firestone Inflation Valve you mentioned, part # F3032-1 has the thread size of a standard Schrader valve, which is .305-32 (.305 outside diameter with 32 threads per inch).
view full answer... - How Long is the Threaded Portion of the Firestone Inflation Valve # F3032-1The Firestone Inflation Valve # F3032-1 has the thread size of a standard Schrader valve, which is .305-32 (.305 outside diameter with 32 threads per inch). This will make the threaded part approximately 3/4 of an inch long with the nut all the way back.
view full answer... - Replacement Inflation Valve for Firestone or Air Lift Air Bags The inflation valve if faulty can be replaced with the Firestone Inflation Valve for 1/4" Tubing part # F3032-1. If you have a valve core removal tool you can make sure the stem inside is tight. It could be a failed o-ring on this component depending on where the leaks are coming from.
view full answer... - How To Install the Firestone Inflation Valve F3032-1In order to install the Firestone Inflation Valve part # F3032-1 you'll first need to drill a hole to secure it, most us the plastic guard around the license plate. Then you can use the supplied washers and jamb nuts to secure it to the vehicle. There is a cap that then goes over the inflation valve while not in use. The other end of the fitting uses what is known as a push-to-connection therefore all you need to do is take the end of the hose and insert it into the fitting then pull back...
view full answer... - Repairing Air Line for Air Helper SpringsIf you all you need is a new valve stem and your lines are 1/4 inch then yes. All you need to do is replace the Schrader valve, # F3032-1.
view full answer... - Can Firestone Inflation Valve # F3032-1 be Used with an On-Board Air TankAs long as the on-board air tank uses 1/4" tubing, the Firestone Inflation Valve, # F3032-1, will work for you.
view full answer... - Replacement for AirLift Inflation Valve 21633 The AirLift Inflation Valve 21633 we don't offer but will interchange with the Firestone Inflation Valve for 1/4" Tubing part # F3032-1.
view full answer... - Recommended Replacement Manual Inflation Valves for Air Bag Suspension SystemsYes, the valves can be replaced on AirLIft air bags. You will want to use the Inflation Valve for 1/4" Tubing item # F3032-1. This is a Firestone part but is also compatible with your bags.
view full answer...
- Replacement Hose Fitting for Firestone Ride-Rite Air Helper Springs # F2560Yes, we have both the Firestone Elbow Connector for 1/4" Tubing # F3031-1 and the Firestone Inflation Valve for 1/4" Tubing # F3032-1 should you need to replace that as well. Both of these fittings are used in the Firestone 2560.
view full answer... - Replacement Inflation Valve for Firestone Air Bag KitSounds like you are looking for a inflation valve like the part # F3032-1.
view full answer... - Firestone Union Tee for 1/4 inch Tubing Recommendation for Filling 2 Airbags Evenly With One ValveThe diameter hose that is used on the Firestone Coil-Rite Air Helper Springs - Rear Kit, part # F4182, is 1/4 inch. You would need a Firestone Union Tee for 1/4 inch Tubing, part # F3025-1, if you wanted to use a single valve to fill both bags evenly on your 2007 Mitsubishi Outlander. You may also be interested in a Single Inflation Valve, part # F3032-1.
view full answer... - Can Manual Inflation Valve be Added to Firestone Compressor Kit and Air Bag SetupYes with a new inflation valve part # F3032-1 and a union tee # F3025-1 you'd easily be able to add a manual inflation valve in case your compressor setup stops working for some reason.
view full answer... - Recommended Inflation Valve for Firestone Sport-Rite Air Helper SpringsThe correct inflation valve for the Firestone Sport-Rite Air Helper Springs, such as the Rear Spring # F9000 referenced in your question, is the Inflation Valve part # F3032-1. This valve has a 3/4 inch threaded length and is for use with 1/4 inch tubing. For a complete air line service kit, you can use # F2012. This kit includes 18 feet of red 1/4 inch air line, two 1/4 inch NPT elbow fittings, one union tee and two inflation valves.
view full answer... - Does Air Lift WirelessAIR Compressor System 74000 Come with Manual Fill ValvesThe Air Lift WirelessAIR Compressor System for Air Helper Springs # AL74000 does not come with the manual fill Schrader valves but it comes with tees for you to tie into the current air bag system you have on your pickup so you can still utilize those manual fill valves (see attached photo from instructions). If you need replacement fill valves you can use the Firestone part # F3032-1 which fits the standard 1/4" tubing that would have come with your air bag kit.
view full answer...
- How To Prevent Air Line Fittings From LeakingIn order to install the Firestone Inflation Valve part # F3032-1 without leaks you will want to use a tubing cutter part # AL10530 or a similar device. It may seem like an unnecessary purchase but the air line cutter ensures that each air line is cut evenly every time which will in turn provide the best seal into the fitting. Most of the time a fitting is leaking it is because the line was not cut properly. Once the line is cut you can insert it into the fitting and pull away to lock it...
view full answer... - Longer Inflation Valves for Firestone Air Bag Helper Springs on a 2015 Mazda CX-5What you could do is use the Firestone valves and add some extenders, # WM80292, which are a total of 2 inches long. That will give you a lot of mounting options. But for Firestone, valve # F3032-1, is the only replacement we have.
view full answer... - Can Firestone Branch Tee for 1/4 Inch Tubing - Male, Part # F3273-1, Thread Into an Air Bag?The part you reference, # F3273-1, is intended for use in an air tank for routing separate 1/4-inch air lines to different destinations. It is not intended for insertion into an air bag. If you need a replacement fitting for an airbag, you may instead want an item such as the Firestone Inflation Valve for 1/4" Tubing, Part # F3032-1. This product is intended for use in an air bag with 1/4-inch air lines. We do offer other fittings for use with 1/4-inch air lines, such as Firestone Connector...
view full answer... - How to Find an Air Leak on a Firestone Ride-Rite Air Helper Spring SystemThe maximum air pressure that the Firestone Ride-Rite Air Helper Springs part # F2355 can be filled to is 100 psi. In addition to max pressure there will need to be a minimum of 5 psi in the airbags at all times in order to avoid deformity. The airbags should stay inflated to the psi at which they are set to. If they lose air over time like you mentioned then you have an air leak somewhere in the system. The best way to find an air leak would involve mixing up a bottle of soap/water and...
view full answer... - Replacement Schrader Valve for Reese Goosebox Coupler RP94720The air bag in the Reese Goosebox coupler # RP85FR is made by Firestone and uses a standard 1/4-inch Schrader valve. We offer a replacement part # F3032-1.
view full answer... - Replacement Inflation Valve for Firestone Coil-Rite Air Helper SpringsIt's called an Inflation Valve. To replace one on the Firestone Coil-Rite Air Helper Springs item # F4174 you'll need item # F3032-1. Or item # F3467 for a 2-pack. It might not be the fitting. If the line wasn't cut perfectly straight it would cause the leak because it'll prevent the fitting on the valve from clamping down correctly. You can use a cutting tool like the Air Lift Air Hose Cutter item # AL10530 which is designed to make perfectly straight cuts.
view full answer... - How To Add Length to Firestone Inflation ValvesThere is an option for you to add length, though there are no longer than standard valves. So what you could do is add a valve extender to the Firestone Inflation Valve for 1/4" Tubing # F3032-1. You would be able to add length by utilizing the Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long # WM80292 or 3" Long # WM80293.
view full answer... - Replacement Elbow Connector for Firestone Ride-Rite Air Helper SpringsIt looks like you have the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F2445 for your 2017 Toyota Tundra. The correct elbow connector is the Firestone Elbow Connector for 1/4" Tubing, 1/4 NPT - Male # F3031-1. Make sure to use an air hose cutter like the # AL10530 for clean, square cuts in order to avoid a leak. If you are still having issues with a leak, I recommend applying soapy water and looking to see where bubbles form to better identify the source. Should...
view full answer... - Replacing Manual Inflation Valves on Air Spring SystemYou can use the Replacement Air Line Kit for Air Lift AirLift 1000 - Rear # AL22007 you asked from or # F2012 to get a new Schrader valve, but it sounds like you just need the valve. I recommend using the Firestone Inflation Valve for 1/4" Tubing # F3032-1 instead to just give you the valve you need. You can simply removed the tube, make a clean cut and then apply the new valve which the line will press onto or into depending on the style chosen above. They are a tight fit so you simply...
view full answer... - A Lot of Sway With Ride-Rite # F2025 Installed on 1998 Chevy Silverado Carrying Lance 992 CamperThe Firestone Ride-Rite Air Helper Springs # F2025 are the correct air springs for your 1998 Chevy Silverado 3500, however according to my technical contact at Firestone you should not be experiencing any sway issues. The most probable cause of the sway is the inflation level does not work well with your set up. Since this is a new set up, you may want to play around with air pressure, drive around a bit and adjust as required. My contact also said that your sway issue may have to do...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Updated by:
Leah B
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Alex H
Expert Research:
Mike L
Expert Research:
Michael H
Written by:
Tyler C
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sean S.
3/24/2024
The system works great. I still have to keep an eye on the air pressure, because its not a perfect system.