What Fasteners to Use to Secure Erickson E-Track to Trailer Interior
Question:
I have a 6 x10 enclosed trailer and want to mount the etrack vertical on walls but since it says the mounting hardware is not included can you tell me what I need to do this?? 19146 Erickson Manufacturing Veritcal Etrack Trailer Cargo Control - 4-Foot Piece. what type of mount screws should I use for etrack 19146.
asked by: Marcia
Expert Reply:
Erickson E-Track should be secured to the mounting surface with no fewer than 2 fasteners per linear foot per side, so for example a 3-foot section would need no less than 8 fasteners. The type and length of fastener depends on the mounting surface more than anything else. The screws used should be either stainless or galvanized and they should be long enough to take full advantage of the depth of material at the mounting point.
If you were install the tracks on 3/4-inch or 1-inch thick plywood for example you would want 1-1/4-inch-long fasteners. Note also some wood materials have chemical treatments that can require special fasteners, such as # TFX150ACQ that are for ACQ-treated wood.
Keep in mind that to a great degree the actual weight capacity of the E-Tracks ultimately depends on the mounting surface.
Products Referenced in This Question
1-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Accessories and Parts
- Tie Down Anchors
- Hardware
- Torx Screw
- 1-1/2 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
- E-Track
- E-Track Rails
- Vertical
- 3-1/2 Inch Wide
- 4 Feet Long
- Erickson
more information >
Continue Researching
- Search Results: wheel chock
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long - Qty 4
- Shop: VueSMART RV and Trailer Backup Camera - Wireless - Universal Mount - 152-Degree View
- Shop: Snap-Loc E-Track Self-Drilling Metal Screws - Qty 20
- Shop: Curt Wheel Chock Set w/ Handles and Mounting Brackets - Solid Rubber - Qty 2
- Shop: Snap-Loc E-Track Wood Screws - Qty 20
- Search Results: coupler lock
- Search Results: coupler hitch lock
- Search Results: wheel locks
- Search Results: coupler lock replacement key
- Search Results: trailer wheel lock
- Shop: etrailer D-Ring Tie Down Anchor - Bolt On - 4-7/8" Wide - Round Mounting Holes - 2,000 lbs
- Shop: AMPLock Trailer Coupler Lock for Flat Lip 2-5/16" Ball Couplers - Ductile Cast Iron
- Video: Tow-Rax Corner Helmet Shelf Review
- Video: Tow-Rax Removable Wheel Chock Review
- Q&A: Can Snap-Loc E-Track Self Tapping Screws SL99FR Be Used To Install E-Tracks To Metal Under 3/4" Wood
- Search Results: helmet holder
- Video: Review of Snap-Loc E-Track Metal Screws - SL99FR
- Q&A: What Screws To Use When Installing E-track To the Side Of Aluminum Trailer Frame
- Q&A: Anchoring E-Track to 3/8 Inch Plywood Side Walls of an Enclosed Cargo Trailer
- Shop: Trailer Wiring
- Video: Review of Snap-Loc E-Track Wood Screws - SL49FR
- Q&A: Mounting a Kayak Rack on an Enclosed Trailer Solution
- Video: etrailer Horizontal E-Track Review
- Q&A: Can E-Track Install in Trailer Application Where One Side Only Attaches to Metal
- Q&A: How to Mount E-Track Cargo Control System To Inside of Enclosed Trailer
- Video: Erickson 4 Foot Vertical E-Track Installation
- Q&A: Mounting the Erickson Vertical E-Track to the Side Wall of an Enclosed Trailer
- Video: CargoSmart E-Track or X-Track System Shelf Track Brackets Review
- Shop: BOLT brand vehicle and hitch locks