Do 2-1/2" Long Torx Screws Come in Package of 40?

Question

Question:

Is the TFX250ACQ screw the same one packaged in item TF01250 which is a pack of 40 2.5 inch screws? Thanks for your help!

asked by: Sam

0

Expert Reply:

The 2-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood # TFX250ACQ is not the same screw that comes in the package of 40, which is part # TF01250.

The 40 screws in # TF01250 are not designed specifically for use on ACQ (Alkaline Copper Quaternary) wood.

expert reply by: Kyle S

0

Answer 1

While bolts would certainly work they would be more labor-intensive and a wood screw with a flush-mounted head will be just as effective. I would go with the 2-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood #TFX250ACQ; if…

view full answer...

Answer 2

The 2-1/2" Long Torx Trailer Floor and Wall Liner Screw #TFX250ACQ is sold individually and not by the box. So you would just need to purchase however many you are needing.

view full answer...

Answer 3

The 2-1/2" Long Standard Torx Trailer Floor and Wall Liner Screw #TFX250 that you referenced require a 7/32 inch pilot hole.

view full answer...

Answer 4

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 5

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The Replacement Amber Lens for MC32AB Trailer Lights #A32AB is a direct replacement for the SAE A P2 DOT 14 and would be what you'd need.

view full answer...

Do 2-1/2" Long Torx Screws Come in Package of 40?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching