Will Dexter Electric Brakes for 6,000 lb Axle Work With 7,500 lb Axles

Question

Question:

The subject part number looks to be the replacement brakes I need for my 1978 Hercules equipment trailer. My trailer has three axles and GVWR of 21000 lbs. Based of that GVWR I figured I must have 7000 lb axles. These brake assemblies are rated for a 6000 lb axle. Can they still be used if I dont exceed 18000 lbs? The trailer weighs 3500 lbs and I plan on hauling my 6500 lb skidsteer on it.

asked by: Top F

1

Helpful Expert Reply:

The Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange # 23-105-106-09 will work so long as your hub and drum is 12" diameter x 2" wide, you have a AL-KO/Hayes 4-bolt or standard 5-bolt brake flange and 14-1/2", 15" or 16" wheels. So long as you meet all those requirements you can use these brakes and be just fine.

To mount three of these assemblies you will also need three of the Mounting Bolts and Hardware for 12" Single Brake Assembly # BRKH12S.

I have added a link to a video review for you to check out as well of the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange # 23-105-106-09.

expert reply by: Kyle S

1

Answer 1

That is a neat looking camper. 1989 was a good year. Honestly, the same answer will apply to the brakes on your 1989 Silver Streak Travel Trailer. The 12" x 2" brakes are still standard. We will just need to make sure that the brake…

view full answer...

Answer 2

To select new electric drum brakes for your Big Tex equipment trailer you'll want to confirm the trailer's GVWR or its axle capacity so you can choose brakes with the right amount of stopping power. For example, a 14K GVWR trailer such as…

view full answer...

Answer 3

The Demco Hijacker Autoslide 21K #DM8550038 weighs approximately 305-lbs. The head of this hitch weighs around 70-lbs and can be removed to help make moving and installing this 5th wheel hitch a little bit easier.

view full answer...

Answer 4

Due to the fact that carbon fiber bikes have a more sensitive frame, Thule does recommend using the Thule UpRide #TH599000. Bike rack technology has not changed to make the racks less compatible, but carbon fiber bikes have become increasingly…

view full answer...

Answer 5

Your dimensions are a little unique but I would assume you have an AL KO brand axle with a 6k axle and the correct assemblies would be the part #23-105-09 and #23-106-09. This is 12 inch in diameter assembly that can attach with a 4 or 5 lug bolt…

view full answer...

Answer 6

The first thing to do is disconnect the trailer from the Liberty. Then using a circuit tester, like part #PTW2993, test each pin of the 4-Way. Clip the alligator clip of the circuit tester to the exposed post, the ground wire. Check each pin with the…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Will Dexter Electric Brakes for 6,000 lb Axle Work With 7,500 lb Axles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching