Mounting Bolts and Hardware for 12" Brake Assemblies
(192 reviews)
Price: $33.46
In Stock
Mounting Bolts and Hardware for 12" Brake Assemblies
Item # BRKH12
Our Price: $33.46
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (192)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - BRKH12
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- Bolts
- Redline
- 12 Inch
Use this hardware kit to mount (2) 12" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.
Features:
- Allows you to install 2 trailer brake assemblies
- Fits 12" brake assemblies without pre-installed mounting bolts
- Works with electric or hydraulic brakes
- Includes:
- 10 Mounting bolts
- 10 Nuts
- 10 Lockwashers
38LW Lockwasher for Brake Mounting Bolt for 12" Brake Assemblies
191000 (7-5) Redline Brake Mounting Bolt
38N Redline 3/8"-24 Nut
Video of Mounting Bolts and Hardware for 12" Brake Assemblies
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Brakes BRKH12 Review
Today we're going to take a look at the mounting bolts and the hardware for 12 inch brake assemblies. Now this hardware will allow you to install two trailer brake assemblies to the five bolt brake mounting flange on your trailer axle. This hardware is designed to fit 12 inch brake assemblies that do not have the pre-installed mounting bolts. It will work with either electric or hydraulic brakes. It includes everything laid out here on the table. It includes 10 of the one and a quarter inch long by three eighths inch diameter mounting bolts. and the head size on that is a nine sixteenth. Heres a nine sixteenth socket, you can see it fits perfectly.
Also comes with 10 of the three eighths inch by 24 size nuts, and they are the same size, nine sixteenth, and also the 10 lock washers. But that should do it for the review on the mounting bolts and the hardware for 12 inch brake assemblies.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
Mounting Bolts and Hardware for 12" Brake Assemblies - BRKH12
Average Customer Rating: 4.8 out of 5 stars (192 Customer Reviews)
Use this hardware kit to mount (2) 12" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers.by: Jason02/12/2024
In my opinion, lock nuts would be better. That is why I give only four stars. Regardless, the bolts, washer, and nuts were in new condition and none were missing. No threading problems or torque problems.
by: David S.12/23/2020
I needed to upgrade my boat trailer from free-wheeling spindles to electric brakes because my new tow vehicle has a 5,000 pound tow rating only if the trailer has brakes. I chose the Dacromet coated brakes assemblies, this mounting bolt kit and the galvanized hub and drum kit. This mounting bolt kit seems to be excellent quality hardware that fit perfectly. I torqued to 35 lb-ft.
by: Jim05/06/2024
Hardware was OK but I reused my original hardware because it was in good condition and I prefer the captive star washer nut to the separate nut and split washer.
by: Lewis06/07/2020
Glad I purchased these when installing the new brakes, old nuts and bolts were corroded made the installation easier and added assurance of new hardware
Lewis
6/8/2021
Continues to work as before
by: Samuel07/18/2023
Paid for this but the hardware was included with the other components.
Not a big deal just not needed..
Katrina D.
7/20/2023
Let me get your information over to our customer service department for them to further assist you.
by: Freddie Gaskins04/07/2024
I never received the bolts
by: Eddie01/23/2024
Product packages packed very well and delivered on time
by: John 09/30/2023
Direct replacement!
by: Brian 12/15/2022
nice complete set of backing plate fasteners.
saved me from pc mealing something together from the hardware store.
by: Richard 10/16/2023
Fast delivery. Two thumbs up
by: Oscar08/29/2022
very poor packaging parts were damaged and missing, everything was just thrown into a large box nothing was individually wrapped on the inside. I don't know why I use this company this is not the first time this has happened
Jenny N.
9/15/2022
I apologize that the package arrived this way and I will let our shipping department know. Our customer service will reach out to assist you.
by: Rachel 08/16/2023
Fit perfectly!
by: Mikeh06/30/2020
I purchased these brake assemblies to replace the old electric brakes on one axle of my 1963 vintage twin axle trailer. Best thing I ever did. The electric brakes were relatively simple to install and have been working extremely well. These new brake assembles have logged more than 8,000 since they were installed and have worked well with the brake controller and break-away cable system I also installed. I am very happy with this product.
by: Bill09/30/2017
Brakes are on and looking/ working great. A much improved self adjust system than was the OEM brakes.
I could see the quality right off. Now no worries for another ten thousand miles. Thanks for your help etrailer
William J.
9/30/2018
Still going strong....
by: Corey03/12/2018
I ordered 4 non-self adjusting brake sets and recieved 2 self adjusting right sides and 2 non-self adjusting left sides. I needed the project to be complete and I installed them. When i tok the out of the boxs, there was some rebuilding as things were out of alignment from shipping. Initial adjustments on both sets was a little more time consuming because of the lack of large adjustments, but once set they are great. The electrical hook ups were easy. They stop my 5000+lb camp trailer just fine. Finally, hardware being purchased separately is annoying. They should be packaged together and the hardware should be free with purchase of the brake sets.
by: Larrie08/19/2020
When you replace everything from the axle spindle out, why would you not replace the brake assembly mounting plate bolts? The quality was good and we felt confident that the correct grade of bolt was used. Price was minimal when compared with the possibility of bolt failure if the old bolts or hardware/farm store bolts were used.
by: Douglas04/21/2021
Just one of the many satisfied customers with the company etrailer. I have used this on line site to refurbish my used boat trailers over the last 10 + years. During this pandemic I sort of let my trailer sit around and just wait until the end is near to react and make the trailer road worthy. After 3 years in out of salt water (mostly in) you might get this. After acquiring new brakes and drums from etrailer it’s back to the salt water again. Thanks for the essential workers at etrailer George, Savanna, and Carol. Cheers
by: Scott07/28/2020
I rebuilt an old boat trailer that has been sitting outside for 10 years. It was in really bad shape & I could not read any of the bearing numbers, all had had was the dimension of the hub & the old bearings. Stacey A. at etrailer was very helpful in getting the right parts I needed & best of all when I got my parts they all fit. The brake kit was great just bolt them on. Very quick shipping & great service.
Thanks
by: Gregory 06/11/2020
Nice job "e-Trailer"; received this "heavy" order very promptly; did not expect it so quickly in view of how other retailers/ manufacturers/ on-line businesses are behind in fulfilling orders. Packages (3) came all intact, well packed and product received in great condition. The order included:
> 5-Leaf Slipper Spring w/ Hook End for 6,000-lb Trailer Axles (2)
> U-Bolt Kit for Mounting 8,000-lb, Round Trailer Axles - 8" Long U-Bolts (2)
> Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 10-1/8" Long Equalizers (2)
> Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 6K (2)
> Mounting Bolts and Hardware for 12" Brake Assemblies (2)
> Bearing Buddy Bearing Protectors - Model 2441SS - Stainless Steel (Pair) (2)
> Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal (4)
> Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side.
These items are being utilized in the total suspension replacement of a 10,000 gvwr tandem axle trailer. Good sized job for a DIY'er. I expect that it will give my JD 2038 tractor a smooth and safe ride as it is towed/ hauled down the highway.
Thank you.
I would/will strongly recommend to a friend/relative or associate.
( I'd take a picture of the "project", but there is a vicious rain storm occurring outside; perhaps one or two pics to follow at a later time).
by: Mitch07/23/2018
I was initially concerned about finding the right parts as the trailer was fairly old. etrailer had just what I needed. The website is so elegant. I was able to find the right parts quickly and with comparative options to make a final selection. The how-to videos are great. This made installation a little more comfortable. Especially when you do not perform this type of work every day. The parts were of high quality and are working as expected. I highly recommend etrailer for any of your trailer needs.
by: Justin 05/21/2023
Ordered everything I needed on a Sunday and even spoke with a person. Quick shipping to boot..
by: John 01/17/2022
Excellent quality fasteners for the price. Bought thsesin case I needed to replace the entire brake assembly on my car hauler trailer. Did not have to replace them but will keep these for other projects that may com along. Will definitely order from etrailer when I need other items.
by: Ron09/14/2021
If a new RV isn't going to have disk brakes, then they should all come with these. Pretty straight forward replacement. I didn't get new drums, just had the old ones turned.
by: David P.07/25/2017
I received some great advice and help from Leeza in selecting the correct product for my needs. Without serial numbers or identifiable model numbers on my existing trailer parts, she was able to determine the correct parts for my particular trailer needs (on a 25 year old trailer.whose manufacturer is no longer in business).
I received the parts in the time span indicated upon ordering, and they fit perfectly.
A good experience all around.
25
192
Show More Reviews
See what our Experts say about this Redline Accessories and Parts
- Correct Braking Assemblies for 2018 Airstream Flying Cloud 28RBThe correct braking assemblies for a 2018 Airstream Flying Cloud 28RB is the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459. The Deka Heat Shrink Butt Connector part # DW05745-5 can then be used to seal the wiring connections. If you want to replace the hardware as well we have the Mounting Bolts and Hardware for 12" Brake Assemblies part # BRKH12.
view full answer... - Recommended Braking Assemblies For Horse Trailer W/ 7000lb Axles Using 12" DrumsFor your 2004 Keifer 4 Horse trailer with 7000lb axles that use 12" drums and brakes with a 5 bolt pattern I recommend the Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA which will work perfectly with your hubs and are rated for 5200-7000lb axles. The # AKEBRK-7-SA are a great option due to the self adjusting feature that makes it to where you will not need to periodically adjust the brakes like you would need to with other...
view full answer... - Recommended 12" x 2" Electric Trailer Brake Assemblies With Parking BrakesI have another option for you, but unfortunately there is not a kit to add parking brakes to the Electric Trailer Brake Kit # AKEBRK-7-SA you were looking at. Instead I recommend the Dexter Electric Trailer Brake Assembly with Parking Brake - 12" - Left Hand # 23-112 and Right Hand # 23-113 are still 12"x2" brakes with the same 5 bolt mounting flange bolt pattern, but are designed with parking brakes. You will also need Mounting Hardware # BRKH12 as it is not included with the brakes. I...
view full answer... - Recommended Hydraulic Brake Assembly for Trailer with 5 Bolt Mounting Flange and 15" WheelsBecause you have a 5 bolt brake mounting flange on the axle, you will most likely have a 12" brake assembly on there. For an axle with a capacity of 5000-lbs to 7000-lbs I recommend using the Hydraulic Brake Kit - Uni-Servo - Free Backing # AKFBBRK-7. These will give you a reliable, free-backing 12" brake assembly that will work well and will be appropriately sized based off the information you've mentioned. These brakes do not come with mounting hardware so you will also need # BRKH12...
view full answer... - Replacement Brakes for Grand Design 5th Wheel With 6,000 Pound AxlesThe Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 you have now is designed for 6,000 lb axles and fits 12" x 2" drums. In addition to the Dexter we have the etrailer # AKEBRK-7-SA or the TruRyde # TRU96FR. All three of these are self-adjusting brake assemblies. If you're looking to save some money I would go with the etrailer brakes. If that is not a concern, I would stick with the Dexter brakes. If you need replacement mounting hardware as well you can use the # BRKH12.
view full answer... - Does Kodiak Disc Brake Kit K2R526DKG Come With Bolts to Secure Bracket to Brake FlangeThe hardware that secures the caliper mounting bracket to the brake flange is not included with the Kodiak Disc Brake Kit - 12" Rotor - 6 on 5-1/2 - Dacromet and KodaGuard - 5,200 to 6,000 lbs # K2R526DKG. You can, however, add this with the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12. I did want to mention that the # K2R526DKG does come with the four bolts needed to mount the calipers to their mounting bracket.
view full answer... - Determining Correct Replacement Brakes for 1973 South Park 1700 Travel TrailerIn order to find the correct electric brakes for your 1973 South Park 1700 you will need to identify what you currently have. Brakes typically correspond with axle capacity and need to match the brake flange bolt pattern as well as the size of the drum on your hub and drum assembly. More than likely you have at least a 3,500 lb axle/axles on your travel trailer so we will start there. For a 3,500 lb 10" x 2-1/4" brake assembly that fits a 4 bolt brake flange you can use the # AKEBRK-35-SA....
view full answer... - Recommended Brake Assembly Backing Plate Bolt InstallationThe attachment bolts for a 5-bolt brake assembly should be torqued to 30-50 foot/lbs. This will ensure your brake assembly # AKEBRK-7-SA is secured correctly. If you don't have a torque wrench, I recommend the Powerbuilt Dual Drive Torque Wrench - 3/8" and 1/2" - 10 to 150 ft-lb # ALL944001.
view full answer... - Replacement Electric Brakes for American Horse Trailer With 6,000 Pound AxlesYes, we do have electric brakes for your 6,000 lb axle on your American Horse Trailer. I recommend using the Electric Trailer Brake Kit # AKEBRK-6. This comes with left and right hand 12" x 2" brake assemblies and is rated for 6,000 lbs. If you need mounting hardware you can use # BRKH12.
view full answer... - How To Install a Timbren Axle-Less 5,200-lbs System on Aluminum Framed Travel TrailerYou can absolutely use the Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle w/ Brake Flange - 5,200 lbs # TASR5200S03 on your 2013 Livin Lite Camper with an aluminum frame, but you'll need to put some sort of buffer between the Timbren system and the frameto prevent galvanic corrosion. Your best bet is going to be putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion,...
view full answer... - Replacement Brake Assemblies for AL-KO T-44 AxlesI have a solution for you, but the AL-KO T-44 axle has been discontinued since Dexter bought them out and there are no longer parts available for them, so you would need to completely replace the axles in order to replace the brakes. To choose the correct replacement axle you will need to know the hub face to hub face measurement and spring seat center to spring seat center measurements of your current axle; you'll also want to try to match your existing bolt pattern with the hubs in...
view full answer... - Replacement Brakes For AL-KO H52 AxleFrom what I find on the number you listed, AXLE H52, it appears this is actually rated at a 5,200 lb. axle. We have available the Electric Trailer Brake Kit Left and Right Hand Assemblies for 5.2K to 7K, # AKEBRK-7-SA. These self-adjusting brakes are 12" x 2" and fit 14.5" to 16.5" wheels. The mounting bolts and hardware # BRKH12 is sold separately
view full answer... - Electric Trailer Brakes For 12 Inch Drum & 5,200 lb to 7,000 lb AxleWe have exactly what you need, thanks to the measurements you provided, which is a new brake kit based on your description of them. The specifics you provided say you have a 5,200 lb to 7,000 lb axle and the correct electric brakes that will fit your 12" drum are the following: - Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies - 5.2K to 7K # AKEBRK-7-SA. These are both the left and right brake assemblies, and the other things you will need are the mounting...
view full answer...
- Electric Brakes For 5,000 lb Dexter AxleYour Dexter 5k axle uses 12" x 2" brakes, so the correct electric brakes are the following: - Electric Trailer Brake Kit - Self-Adjusting # AKEBRK-7-SA The other thing you will need is the mounting hardware, part # BRKH12.
view full answer... - Replacement Self Adjusting Brakes for 2018 Eclipse Attitiude Toy Hauler with 122259 AxleTek BrakesThank you for the photos! The part numbers you're looking for are # AKEBRK-7L-SA (left hand) and # AKEBRK-7R-SA (right hand). These are going to be the correct replacement 12 inch self-adjusting brake assemblies for your 2018 Eclipse Attitute toy hauler with Lippert axle and AxleTek brakes with part number 122259 (left hand) and 122451 (right hand), or part # AKEBRK-7-SA for the kit. The mounting bolts, nuts, and lockwashers can be purchased separately with part # BRKH12.
view full answer...
- Recommended Electric Trailer Brakes For A Dexter Torsion Axle With Hub 8-201-5When it comes to installing trailer electric brakes on your Dexter Torsion Axles with the drums being # 8-201-5 The Electric Trailer Brake Kit - 12 inch - Left and Right Hand Assemblies - 5,200 pounds to 7,000 pounds # AKEBRK-6 will work for you. This kit comes with a driver's-side and passenger's-side electric brake that measures out to 12 inches by 2 inches. The brake pads are made out of a durable friction material that overs an improved braking and longevity. The backing plates are...
view full answer... - Does the Dexter Nev-R-Adjust Trailer Brake Kit Come As a Pair Not a dumb question at all! Brake assemblies like the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465 are either sold in matching pairs or as single brake assemblies for either the left or right side of the trailer # 23-464 (left) or # 23-465 (right). This particular kit is sold as a pair, so if you have tandem axles on your 2014 Grand Design Solitude 305re you'll want to order 2 of these brake kits. Additionally, these brake kits...
view full answer... - Recommended Replacement Hydraulic Brake Assemblies for 7000-lbs Axle on Boat TrailerTo replace the 12"x 2" hydraulic brakes on your boat trailer I recommend using the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 12" - Left/Right Hand - 5.2K to 7K # AKFBBRK-7-D, which are Dacromet plated for use on boat trailers and will work on your 7000-lbs axles. These are also free-backing brakes, so you'll be able to back up without worrying about engaging the trailer brakes. These brakes do not come with mounting hardware included, but you can add that with the Mounting...
view full answer... - Option to Replace 3,000 Axle With 4 Inch DropWe have an option but nothing in those measurements. The closest we have is the Timbren Axle-Less Suspension System, which are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements. There isn't a 3,000 lb option but there is a 3,500 lb, and for that with a 4" drop, along with the hub and drum and electric brakes, you will need the following: - Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Drop Spindle # TASR35HDS03 - Trailer...
view full answer... - Can Manual and Self-Adjusting 12 x 2 Electric Brakes be MixedYou can mix manual adjusting and self-adjusting 12" x 2" electric brakes and get away with it, so technically yes, it's OK. But it will also lead to your brakes being adjusted differently on each axle as opposed to being uniform, as the brake shoes of the manual adjust brakes would not always be aligned. This can lead to suspension and braking issues and it is something I recommend against. If you keep them constantly re-adjusted then it will be better, but the better option is to have...
view full answer... - Dexter Self-Adjust Electric Brake Fit For 2016 Heartland Cyclone 4200 Toy HaulerAbsolutely; the correct Dexter self-adjusting electric trailer brakes that fit your 2016 Heartland Cyclone 4200 toy hauler are the following: - Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-464-465 The # 23-464-465 includes both the left and right brake assemblies, though you will need the mounting hardware, which is the Mounting Bolts and Hardware # BRKH12. Also, to connect the wires I recommend using the Deka Heat Shrink Butt Connectors # DW05745-5. These come in a pack of five...
view full answer... - Which Brake Assemblies for 7K Dexter Axle With EZ Lube SpindlesYes. You could use the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7K # 23-464-465 on your Dexter 7k EZ Lube axles. If you also need brake mounting hardware that is available with part # BRKH12
view full answer... - Replacement Braking Assemblies for a 2015 Cedar CreekFor your 2015 Cedar Creek, we have the Electric Trailer Brake Kit part # AKEBRK-6 which is a manual adjust assembly and part # AKEBRK-7-SA which is a self-adjust assembly. The manual adjust assembly will require you to adjust the pressure on the brake shoes with part # W80630 every so often for even brake pad wear whereas the self-adjust assembly will do this for you. I am not sure what you mean by "fwd" but these are the only two types of electric braking assemblies. You will also need...
view full answer... - Can I Use Self Adjusting Brakes in Place of Manually Adjusting Brakes on my 5th WheelYes, you can replace your old manually adjusting brakes with a set of self adjusting brakes without any issues. You'll want to determine the size of the drums on your trailer axles, which can usually be easily determine by your axle capacity. If you've got 10 inch drums and tandem/triple 3500-lbs axles then you'll want to use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These assemblies do not come with mounting hardware...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David S.
2/19/2022
After one year these bolts are tight and free of any rust or corrosion.