Replacement Landing Gear Legs For a 2010 Keystone Montana 5TH Wheel Camper

Question

Question:

I need to know what landing gear kit to order we checked both motor and gear box they are operating the legs seem to bind when you hit the switch up or down as soon as you hit the switch the motor shakes and chatters please help I can not find a manufacturer or number on the legs

asked by: Robert B

0

Expert Reply:

Your 2010 Keystone Montana uses specific landing gear that is special to the Montana. The Lead Leg # LC178653 and Follow Leg # LC178652 are the ones you are needing.

If you find that either the Gearbox # LG-179015 or Motor # LC142178 are bad as well we do have the replacements for them as well.

expert reply by: Bud M

0

Answer 1

That's a great question. The jacks sit in the 5th wheel frame mounted clips so that the tab on the upper end of the jack leg sits under the clip, and the tab on the lower end sits above the clip, as shown in the diagram on the right-hand side…

view full answer...

Answer 2

Yes. You can rebuild the #LC178652 (follow leg) and #LC178653 (lead leg) with part #LC146059 for the lead leg and part #LC146060 for the follow leg.

view full answer...

Answer 3

The Keystone Montana RV line actually uses a unique, custom landing gear system from Lippert. Because of this, Lippert produces specific OEM replacement legs that are designed specifically for your 2009 Keystone Montana 5th Wheel Trailer. For the…

view full answer...

Answer 4

Lippert made specific replacement landing gear for your 2010 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652 are…

view full answer...

Answer 5

Keystone Montana fifth wheel campers used a specific set of landing gear so the motor part #LC142178 so based on that the part #LC142178 is the correct replacement for it. The gear box is sold separately and for that you'd want the #LC276602.…

view full answer...

Answer 6

Lippert made specific replacement landing gear for your 2011 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.

view full answer...

Answer 7

The replacement landing gear for the Keystone Montana will require welding if the brackets need to be replaced. The legs you need are #LC178653 for the lead leg and #LC178652 for the follow leg.

view full answer...

Answer 8

I reached out to Lippert and found that the travel on the Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652 is 21.5".

view full answer...

Answer 9

Lippert made specific replacement landing gear for your 2007 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.…

view full answer...

Answer 10

We do have the measurements for the Replacement Lead Leg for a KeyStone Montana Trailer #LC178653. I went ahead and attached a picture of the dimensions to this answer. Even though this leg has three bumps, it will still work to replace the lead leg…

view full answer...

Answer 11

What you are describing can be a result of a battery with insufficient charge, a problem with the motor itself, the gear box, or an internal problem such as a bent leg or damage screw or nut. The easiest to test for is a weak battery. Have the…

view full answer...

Answer 12

In order to determine if the issue you are having with your landing gear legs clicking and popping is caused by the gear box or leg assembly you will simply need to disconnect the gear box from the legs and then test each manually. If you feel…

view full answer...