Replacement Follow Leg for Venture 5th Wheel RV Landing Gear - 33-1/2 Extended Length

See what our Experts say about this Lippert Accessories and Parts

• Replacement Landing Gear Legs for Venture 900 Landing Gear
  The correct replacement for your Venture VMC900R RV landing gear are part # LC119102 for the lead leg or # LC119101 for the follow leg. These will be direct replacements for the current legs you've got.
  view full answer...
  
• Looking For Replacement Atwood Follow Leg For A 1991 Terry Resort 5th Wheel
  Hello Mitchell. We do have a potential option for you, but Atwood is no longer in business, so I am afraid we do not offer a follow leg that will be a suitable replacement for you. The landing gear that Atwood made when they were in business did not always follow the industry standard, making many parts made today incompatible. I hate to say it but the solution for you and many other customers who find themselves in this same situation is to replace the entire set which may sound like a...
  view full answer...
• Selecting The Correct Replacement Venture Landing Gear Follow Leg On a 2005 Thor Tahoe Transport
  We have a couple options for the Lippert replacement follow landing gear leg for your 2005 Thor Tahoe Transport 27WTB. To ensure you get the correct leg you will need to measure the length of your outer black portion of the leg. The Replacement Follow Leg # LC119101 has an outer tube length of 29-1/2". The Replacement Follow Leg # LC64PJ has an outer tube length of 33-1/2". Both of these legs will mount to the inside of the frame rail and have the press fit style caps.
  view full answer...
  
• How To Dissemble And Grease The Screw-Nut Assembly For Bulldog Tandem Landing Gears
  I went ahead and checked the Replacement Screw, Nut, and Bearing Assembly for Bulldog Tandem Landing Gear for the Bulldog 2-Speed Tandem Landing Gear Set, and that nut is actually not removeable. To properly grease your drive screw, you're going to want to: 1. First remove the screws and cover on the top of the jack. 2. Then, pull back the retaining spring and push the pin down on the top gear. 3.Rotate the jack handle 180 degrees and pull out the pin that was pushed down in step 2. 4....
  view full answer...
• Replacement Follow Leg for 2010 Keysonte Montana Hickory With Venture Landing Gear
  Lippert was unable to identify exactly what you have based on part numbers, but I can still help you find the correct replacement. You will need to check and see where the landing gear is mounted and also measure the black outer tube on your existing leg. If the landing gear is mounted on the inside of the frame rail you need one of the following: -Replacement Follow Leg for Venture 5th Wheel RV Landing Gear # LC119101 (29-1/2" Measurement) -Replacement Follow Leg for Venture 5th Wheel...
  view full answer...
• Replacement Leg for Venture 5th Wheel RV Landing Gear
  The correct Replacement Leg for Venture 5th Wheel RV Landing Gear is part # LC64PJ for the follow leg and part # LC54FR for the lead leg
  view full answer...
• Replacement Follow Leg For a 2007 Terry 295TSRL With Part VMC900L
  Due to the measurements you have on your VMC900L, you will actually need the Replacement Follow Leg for Stromberg Carlson Landing Gear - 33-1/2" # LG-177201. This will match all your measurement and I included a review video laying all these measurements out as well.
  view full answer...

Do you have a question about this Accessories and Part?