Locating Replacement Landing Gear Leg for 2009 Keystone Cougar 5th Wheel Trailer

Question

Question:

I have a 2009 keystone cougar ultra lite 5th wheel and the inner leg is loose and just falls to the ground , any thoughts?

asked by: Ken

0

Expert Reply:

If the inner leg of the landing gear on your 2009 Keystone Cougar 5th Wheel Trailer is loose and falling to the ground, I recommend replacing the leg altogether. The fact that the inner leg is not staying put indicates an internal issue with the unit.

If you are able to locate the manufacturer and model of the landing gear you have installed, I will be happy to make a recommendation. I also recommend taking a quick measurement of the leg to ensure a compatible replacement. For example, the Replacement Follow Leg for Keystone 5th Wheel Landing Gear # LC178652 has a length of 29-1/2 inches. I have included an image that includes additional dimensions on the leg so you can see if it will work as a replacement.

expert reply by: Chris R

0

click to enlarge

Answer 1

Yes. You can rebuild the #LC178652 (follow leg) and #LC178653 (lead leg) with part #LC146059 for the lead leg and part #LC146060 for the follow leg.

view full answer...

Answer 2

The Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 5,500 lbs #LG-1 is a complete landing gear and motor set that's a popular replacement we've seen used on many Keystone Cougar 5th wheel trailers, but you'll…

view full answer...

Answer 3

If you just need the passenger side which for your trailer is the follow leg, then use #LC178652. If you want to replace both legs use #LC178653 for the driver's side. If you want to replace everything, I recommend the Lippert Electric Landing…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 7

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Locating Replacement Landing Gear Leg for 2009 Keystone Cougar 5th Wheel Trailer

Product Page this Question was Asked From

Continue Researching