Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Long, nickel-plated, interchangeable ball shank has 3/4" diameter and 2-1/4" length. 3,500 lbs GTW. Corrosion and rust resistant.
Features:
Specs:
This Convert-A-Ball interchangeable component exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there. I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Convert-A-Ball 3 Quarter Inch Diameter Shank. This can be used either as a replacement for your Convert-A-Ball setup or to increase the versatility of your Convert-A-Ball set. This will work with an inch and seven eighths. And two inch interchangeable hitch balls.
It's not gonna be compatible with your two and five 16th interchangeable ball. But it is two and a quarter of an inch long. And it is that three quarter inch diameter. So it is going to fit into your ball mounts with a three quarter inch diameter ball hole. This does have a steel construction.
So it is going to provide us a 3,500 pound towing capacity. It does also use a new, non-electric nickel plating technology that produces a strong, protective finish here. This is gonna be corrosion resistant, non magnetic and stain repellent. So it's gonna stand up to whatever you dish out. It does provide a uniform coverage.
Even on the hard to protect recesses and interior surfaces. The eco-friendly plating method is less harmful to the environment than your traditional chrome electroplating. So, all around a really great option here. This is made here in the USA. So you can trust it is made to the high quality standards that we've come to know and trust for products made here in the US.
It's also going to exceed the Trailer Hitch Manufacturer's Association V-5 ratings in all categories. And meet the J684 SAE standard. So, if you are looking to either replace a shank for your Convert-A-Ball, or you're wanting to add a little bit of versatility, this is gonna be a great option for you. That completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Average Customer Rating: 4.9 out of 5 stars (35 Customer Reviews)
Long, nickel-plated, interchangeable ball shank has 3/4" diameter and 2-1/4" length. 3,500 lbs GTW. Corrosion and rust resistant.The product was exactly as described on your site, got here very quickly, and works great. The old 1-7/8" and 2" Convert-A-Ball trailer balls I already had fit perfectly. Your service and delivery were great, and I would definitely purchase from etrailer.com again.
Thanks for the personalized service and follow-up!
- "Dr. Frank"
Have used Convert-a-Ball products for decades. Useful for changing ball size when towing trailers with different size hitches. I also use this shank for a bicycle rack, which is designed to replace the ball.
When purchasing, ensure the shank diameter and length are consistent with the size of your hitch and with your towing needs.
Purchased Covert-A-Ball...works great. Product staff were very helpful...will order additional product soon. Great vendor!
Erik
1/13/2016
Still working as well as when new. No problems.
Honestly, I have not used the "Convert-A-Ball shank" at all. So I really cannot give it a fair rating. I owned a similar. (possibly the same), shank years ago if this is the same manufacturer, then I can tell you that the product is awesome.
I use the Convert-A-Ball system to ease trailer connection from multiple trailers to multiple vehicles using different size balls. I appreciate etrailers prompt delivery, reliable parts and courteous staff and highly recommend this company.
George and the folks at etrailer have been great to work with. They strive for the best customer support they can offer. Products are top notch and service is impeccable!!!!
I like the versa-ball system and the ease of changing balls. I have used the system for many years and had to replace the 3/4" ball mount.
Have enjoyed the realiability and conveinance of Convert-A-Ball products over the past 20 years.
Excellent product. I have several of these on various vehicles and they give good service.
Great customer service. Product was actually out of stock, but they
kept me informed throughout the entire process. I really enjoy working
with these guys.
good product and service
Everything and everyone at etrailer was great! Another hard to find part found! Thanks!
This as well as all Convert A Ball Shanks I have are GREAT. I can switch all three ball sizes between any of the shanks. This is a good cost savings measure. Time saver as well. It only takes seconds to switch between the ball sizes. Great for adjustable shanks to make them very versatile. Adjust ball height and size fast and easy. All available from etrailer.
This is the second one that I have had. The first one I accidently sold on a previous vehicle. The availability of all three size balls is very handy. I purchased a mounting rack and mounted it in the truck tool box so that I had all three balls available in the truck, and locked up so they wouldn't get stolen. Great invention!!!
Changeable trailer hitch mounts. Great idea, saves time in changing different balls and is space efficient. Super item to have if you tow or move trailers etc.
Order came in a short time. Converting to different balls is easy. With different types of hitches makes it simpler than conventional balls.
The convert-a-ball, along with the additional post, will now allow me to use either trailer with either vehicle. Balls switch out quick and easily. Well made product, no more having to constantly switch out balls.
One of the only ways to get 10,000# rated 2" dia ball - these things work great - easy to change ball sizes. A must for Bull Dog 2" couplers............
great product easy to use e trailer best place to by stuff great prices and customer service to
Works great, someone else liked it to, and walked off with mine so I needed a replacement cuz it is so easy.
Arrived ahead of schedule and in good shape. Everything fit and it raised trailer up to a level height.
Very good product. Great service from e-trailer.
I like these convert - a - ball products, well made and work well.
product was exactly what I ordered and was deliver a day earlier than expected. eTrailer will be my go to site from now on.
Looks very Heavy Duty, installs easy, best of all made in USA!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Frank S.
1/22/2015
Thanks for letting me know.Great product. Still works just fine.