Bulldog Winch 3/4" Shackle for 1-1/4" Hitches
(22 reviews)
Price: $78.99
In Stock
Bulldog Winch 3/4" Shackle for 1-1/4" Hitches
Item # BDW20239
Retail:$117.19
Our Price: $78.99
You Save: 33%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (22)
- Q & A (0)
- Videos (1)
- Photos
Bulldog Winch Tow Shackles - BDW20239
- Fits 1-1/4 Inch Hitch
- Shackle with Shank
- 3500 lbs
- Hitch Mount
- Bulldog Winch
- Solid Shank
- Chrome
- 3/4" Shackle for 1-1/4" hitches
- Fits most Class I & II receivers
- 3,500-lbs Working load limit
- Solid steel mount with 3 different pin hole positions
- Multiple pin holes allow shackle to be used horizontally or vertically
- Short mounting shank enables the shackle to sit close to the receiver
- Great for side-by-sides with 1-1/4" receivers
20239 Bulldog Winch 1-1/4" Receiver Mount with 3/4" Shackle
California residents: click here
Video of Bulldog Winch 3/4" Shackle for 1-1/4" Hitches
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Bulldog Winch Off Road Accessories - Tow Hook - Loop - BDW20239 Review
Today, we're going to be taking a look at part number BDW20239. This is the Bulldog Winch 3/4" Shackle for 1-1/4" Hitches. This is designed to fit most Class I and Class II receivers. Now, when it comes to the capacity, we're looking at a 3500-lb working load limit or your vehicle's receiver capacity, so you'll want to go by whichever is lower. This is going to be great for recovery situations. Simply provides an attachment point for recovery strap. This piece is going to be the piece that mounts inside your hitch.
It's made from a solid steel construction. It's going to offer three pinhole locations, so you have one right here and then two on this side. That's going to allow the shackle to be used horizontally or vertically, and it's got the short mounting shank. That's going to enable the shackle to sit pretty close to the receiver that's mounted onto the vehicle. We have a screw pin design.
That's going to allow for easy and quick connect and disconnect of the recovery strap . Now, this is going to be great for ATVs and UTVs that have an 1-1/4" hitch on it. It is going to require a 1/2" hitch pin and clip or lock to get it secured into the hitch. That item is sold separately. You can find those right here at etrailer.com. A few measurements to go over with you real quick.
We're going to take a measurement of the overall length, basically measuring from very back to very front. We're looking at about 8". If we take a measurement from the center of the hitch pin holes to the back of the shank . so measuring from this one right here to the back of the shank, that's going to give us a measurement. It's going to be 13/16 of an inch.
From that center one, we're looking at 1-1/2". Then from the one that's closest to the shackle. That's going to give us a measurement of 2-1/4". Now, if we take a measurement from the center of those hitch pinholes to the back of the shackle, the closest point, there, of the shackle . the closest pinhole to the shackle is going to be 1". That center one, right here up top, that's going to be 1-3/4, and to the very back pinhole, that's going to be about 2-1/2". Pretty simple installation. You'll need to determine which way you want this positioned in your hitch. Slide this piece into the receiver opening of the hitch and then secure it in your hitch using a hitch pin and clip or hitch lock. That's going to do it for today's look at part number BDW20239.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Bulldog Winch 3/4" Shackle for 1-1/4" Hitches - BDW20239
Average Customer Rating: 4.8 out of 5 stars (22 Customer Reviews)
by: John07/30/2018
Love the Bulldog winch 3/4" ×1-1/4 shackle.
Its very strong, works & looks great, on my Scrambler 1K. I've had the bulldog for over a year now and it has not let me down. I had a difificult time finding a shackle of this size and quality here in Canada. Until I came across etailer.com. I would definitely recommend this shackle for any atv/utv with a 1-1/4 hitch. I need to get 2 more for the RzR & Ace and for me it's a no brainer where I'll be ordering again from etrailer.com made easy. Thanks
by: Darryl 04/13/2023
This is one high quality product. The craftmanship (fit and finish) is amazing. This is exactly what I was looking for, and the quality of the product is what I've come to expect from etrailer.com.
by: Ben K.07/15/2019
I purchased this as a recovery device and for dragging trees/brush while off-roading. It took me until just about a month ago to finish my project buggy and get the hitch installed. When I went to put the receiver into the hitch, it was too big and wouldn't fit. It needs to be milled (which I haven't gotten around to doing quite yet). It is made of great material and is VERY heavy duty. But, that doesn't matter, because the way that it sits, it is useless. I wish that I would have been able to check out the fitment sooner, but I assumed (and we all know what that means), that it would fit without modification.
by: Jimmy Morrison07/18/2017
I hope I never have to use it but I sure am glad I have it. I install it in my trailer hitch to use as a rear tow point on my track car. It should more than do the trick IF that time ever comes.
by: David 08/17/2018
A good 5 star rating. This shackle is very heavy duty. I just can’t wait until I install it on my SUV. My friend has one similar. Fit perfectly on my receiver. Looks great.
David
8/17/2019
Still strong as ever. I painted mine black to match the receiver and back bumper. Looks great.
by: Eugene05/29/2016
I used this product for my John Deere Gator for a drag.. Worked great. I am very happy with my purchase
by: Steven05/04/2020
I ordered a few products at one time and, before ordering, had some questions about compatibility. My questions were answered quickly and accurately. Products arrived more quickly than expected and were in good shape (no damage). I found the product videos very helpful when shopping. My ATV isn't here yet so I can't comment on fitment.
by: Denise 10/13/2021
I purchased this for my Polaris. Fits perfect in the front. Excellent product.
by: Cliff12/27/2018
Was nicer that pic better than other one I got from another website nice size shackle too bigger
by: Matthew08/25/2020
Very nice construction except I had to put some black tape around it to keep it from rattling while riding.
by: Ray B.09/28/2017
This is a serious piece of equipment! It is extremely well made. I am VERY impressed and I would definitely buy again.
by: Lary B11/23/2019
product is as described
by: Michael04/14/2022
Gets the job done.
by: Tim 01/13/2022
Great quality great service,5 stars from me.
by: Pat02/07/2022
Just as described. Had it in a couple of days.
by: Kevin02/21/2019
I got the hitch. Thank you very much!
by: Gary 07/09/2023
by: Kyle S.07/22/2017
Looks to be of high quality.
by: Chuck 01/30/2023
by: William C11/04/2022
by: Steve 11/28/2022
22
22
See what our Experts say about this Bulldog Winch Tow Shackles
- Trailer Hitch for 2017 Infinity QX50 and Tow ShackleFor your 2017 Infiniti QX50 we have the Curt hitch part # C11510 as a confirmed fit that would work great for what you are wanting to do. Then you could use the tow hook part # BDW20239 and you'd be set.
view full answer... - Can The Trailer Hitch for a 2010 Toyota Prius Be Used for Vehicle RecoveryThe Curt Trailer Hitch Receiver part # C11276 which is a fit for a 2010 Toyota Prius should be okay to be used to pull the car out of a ditch. The trailer hitch doesn't have to be rated for the weight of the vehicle since it's a rolling load. It uses the same attachment point as the factory tow hook does so there should be no issue. That said, you'd really have anther option. I recommend the Bulldog Winch 3/4" Shackle part # BDW20239 for vehicle recovery.
view full answer... - Can Curt Hitch for 2018 Honda Civic Sedan Be Used for Vehicle RecoveryThe Curt Trailer Hitch Receiver part # C11604 is an excellent easy to install option for a 2018 Honda Civic Sedan. It could then be used for vehicle recovery within reason, snow should be fine but mud on the other hand could create too much force for the hitch to handle. I recommend using the Bulldog Winch 3/4" Shackle for 1-1/4" Hitches part # BDW20239 for an attachment point.
view full answer...
Do you have a question about this Tow Shackle?
Info for this part was:
Expert Research:
Jameson C
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Hannah L
Written by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rachael H.
8/8/2019
Thank you for your feedback in your review on your Bulldog Winch Shackle BDW20239, but you noted it was too large and did not fit in your hitch. I did want to check with you, because some 1-14 inch hitches do have a stopper in them. This stopper makes the hitch shank length shorter, I wanted to see if the fit issue you had with your shackle or if it was a diameter of the shank issues.