Fulton A-Frame Coupler, 2-5/16" Ball, Wedge Latch, Primed Finish - 10,000 lbs
(9 reviews)
Price: $73.85
In Stock
Fulton A-Frame Coupler, 2-5/16" Ball, Wedge Latch, Primed Finish - 10,000 lbs
Item # F44305R0317
Retail:$116.28
Our Price: $73.85
You Save: 36%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (9)
- Q & A (0)
- Videos (1)
- Photos
Fulton A-Frame Trailer Coupler - F44305R0317
- 2-5/16 Inch Ball Coupler
- Weld-On
- 10000 lbs GTW
- Standard Coupler
- Fulton
- Trigger Latch
High-strength, weld-on, stamped coupler for 50-degree-angle trailer frames features an easy-to-use wedge latch and a convenient, built-in A-frame jack-attachment port.
Features:
- A-Frame coupler is sturdy and simple to use
- Wedge latch makes for secure and easy trailer hookup
- Built-in jack-attachment port provides convenient location for mounting your A-frame utility jack
- Weld-on design with primed finish fits your desired application
Specs:
- Ball size: 2-5/16"
- Hole diameter for jack: 2-1/4"
- Lock pin hole diameter: 5/16"
- Capacity: 10,000 lbs
- Limited 3-year warranty
44305R0317 Fulton Standard Series A-Frame Stamped Coupler, 2-5/16" Ball, 10,000 lbs, Wedge-Latch Coupler
California residents: click here
Video of Fulton A-Frame Coupler, 2-5/16" Ball, Wedge Latch, Primed Finish - 10,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Fulton A-Frame Trailer Coupler - Standard Coupler - F44305R0317 Review
Today we're going to take a quick look at the Fulton A Frame Coupler for 2-5/16 balls, part number F44305r0317. Now Fulton covers this coupler with a limited three year warranty that has a gross trailer weight capacity of 10,000 pounds and it's designed to use 2-5/16 balls. It's a well done style coupler designed to work with 50 degree A frame trailers and you'll just weld the coupler along its edges to your trailer. It's got the mount for a standard A frame trailer jack with a large round hole for the body of the jack and three threaded holes for the bolts to secure it. It's finished in a gray paint and it uses a trigger latch system. We'll pull up on the trigger below the handle and then open the latch to free the ball underneath.
There's a hole through our latch system that we can use the coupler lock to secure the latch and make sure it doesn't come open when pulling a trailer down the road, as well as prevent theft while having your trailer stored. When we open the latch, the hole in our handle also lines up with a couple of holes on the top of our mount so we can insert our pin and it will hold the latch open for us. Now we'll take a look at the system underneath. Underneath you'll see that there's a wedge here that slides down and forward onto the back of the ball when we secure it. We'll pull up our trigger, open our latch, and the wedge moves up and away from the ball.
Now we've got a 2-5/16 ball with us, so we'll show you how it works with an actual trailer ball. We've got our coupler open, fit our ball into place, as we let the latch close, the wedge comes down securing our ball. It allows free movement so the trailer will track nicely behind the truck, but it's also captive and it won't let the ball come out. Again, we'll pull up our trigger, pull up our latch, the wedge moves back and we can remove our ball. That's it for a look at the Fulton A Frame Coupler for 2-5/16 balls, part number F44305r0317..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Defective
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Fulton A-Frame Coupler, 2-5/16" Ball, Wedge Latch, Primed Finish - 10,000 lbs - F44305R0317
Average Customer Rating: 4.9 out of 5 stars (9 Customer Reviews)
High-strength, weld-on, stamped coupler for 50-degree-angle trailer frames features an easy-to-use wedge latch and a convenient, built-in A-frame jack-attachment port.by: Tim 09/29/2021
Perfect to replace the Avion under-slung A-frame coupler. This hitch is more level with pickup trucks made today as many 1980s trucks had a lower hitch receiver. With my 4x4 my Avion 34V travel trailer is level with a straight 3-ball hitch.
by: Greg04/11/2022
Appears well built and solid. Have not been able to weld it on yet, but looks like it will be a seamless fit. Replacing original coupler on an old 16 foot car hauler. Should handle the weigh without issue.
by: Mark 11/18/2021
I HAVE BEEN BUILDING AND REPAIRING TRAILERS FOR 40 YEARS. THIS COUPLER IS A ONE PIECE SHELL WITH PROPER MAINTENENCE THEY LAST FOREVER.
by: Pat H. 06/21/2016
Delivery on schedule and is exactly as advertised.
by: Samuel 01/13/2020
Nice hitch exactly what I needed
by: Kelly 06/17/2023
by: Antoinette09/24/2021
Exactly what I wanted
by: Dan 10/23/2021
by: Russell 12/09/2021
9
9
See what our Experts say about this Fulton A-Frame Trailer Coupler
- Need To Replace Shelbly 5101 2 Inch Coupler With A 2-5/16 CouplerYeah we can get you a new coupler that will take a 2-5/16 ball. Depending on the payload I suggest the Buyers Products A-Frame Trailer Coupler w Jack Hole - Auto Latch - 2-5/16" Ball - Weld On - 15K # 3370091595. It has a weight capacity of 15,000 pounds, is heavy duty steel with a black powder coat, weld on install and made in America. If you do not need one so stout we have the Fulton A-Frame Coupler, 2-5/16" Ball, Wedge Latch, Primed Finish - 10,000 lbs # F44305R0317. It has a 10,000...
view full answer... - Hole Size for Electric Trailer Jack Installation on the Fulton F44305R0317 A-Frame Trailer CouplerI went out to the warehouse and pulled the Fulton # F44305R0317 A-Frame trailer coupler, and the center installation hole in the coupler is 2-1/4 inches inside diameter. The bolt holes around the hole are 3-1/8 inches on center at the back of the coupler and 3 inches from the back two bolt holes to the front bolt hole. See photo attached for clarification. I also pulled two jacks that have 2-1/4 inch diameter outer tubes. The jacks installed easily on the Fulton coupler and the bolt holes...
view full answer...
- Dimensions of the Fulton Coupler # F44305R0317 The Fulton coupler # F44305R0317 that you referenced has the standard 50 degree angle for mounting to the trailer frame and overall is 12-1/4 inches long and 11-1/4 inches wide.
view full answer... - Fulton A-Frame Coupler Repair KitWe only have two options for a Fulton A-frame coupler repair kit so I will list them for you here. The # F640801 fits the # F44305R0317 and # F44305R0500. The # F670801 fits the 44125W and 44150W series couplers. None of these are actually 14k so unless that is incorrect I don't think we have a repair kit. A lot of Fulton replacement parts have been out of stock for more than a year since they were acquired by First Brands so it is possible one exists and we don't have it right now. Some...
view full answer... - What Size Hitch Ball Does Coupler Repair Kit # F640801 FitThe coupler repair kit part # F640801 is the correct repair kit for the # F44305R0317 which is designed for 2-5/16 inch hitch balls.
view full answer... - Options For Replacing 10,000 lb Atwood A-Frame Trailer CouplerAtwood is no longer in business, and because repair kits and replacement parts are manufacturer specific, the best option available is going to be a replacement A-frame coupler. While I'm sure this isn't the news you wanted to hear, there are a couple of options that won't break the bank: - Fulton A-Frame Coupler - Wedge Latch # F44305R0317 - Sleeve-Lock A-Frame Trailer Coupler - Flip Latch # CA-5296-B Both of these are weld-on couplers that accept a 2-5/16" hitch ball and will be able...
view full answer... - How to Choose the Correct Trailer Coupler Repair KitI do have options for you but trailer coupler repair kits are not exactly universal. If I knew the exact trailer coupler you have on your trailer then I could confirm 100% whether or not we have a trailer coupler repair kit for you. However, it looks like you have the Fulton A-Frame Coupler part # F44305R0317 which means the Repair Kit for Fulton A-Frame Coupler 2-5/16" Ball part # F640801 would be correct for you. My advice would be to order both the coupler and coupler repair kit. If...
view full answer...
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
Installed by:
Patrick B
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.