Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number FE443050303. This is the Fulton A frame coupler. The A frame coupler is sturdy and very simple to use. It's going to provide your attachment point for your two and five sixteenth inch hitch ball. It's going to be made from a steel construction. It's going to have a black primed finish on it and this is a weld on design.
Right here, you're going to have your low profile latch. It's very easy to use, offers a nice, sleek appearance. In order to open up the mechanism here in the socket to receive your hitch ball, flip the latch up and then pull it back. Then, it's going to remain open, that way you can make your connection. See how that opens up the mechanism right there Then, to close it, simply lift it up and push it forward and it's going to drop back down and then that closes the mechanism around the hitch ball. It's going to have a small pin hole located in the latch, that way you can install a coupler lock system or a coupler pin.
That is going to be sold separately. The diameter of that hole's going to measure about five sixteenths of an inch and then when choosing a coupler pin or a coupler lock, you need to make sure that it has a span or usable pin length of about seven eighths of an inch. That's about the width of that latch right there. We're also going to have the built in jack attachment area. This is going to provide a convenient location for mounting your A frame utility jack. The large hole is going to give us a diameter, looks to be about two and five sixteenths of an inch, so that's going to be perfect for jacks that have a diameter on the outer tube of two and one quarter of an inch.
These mount holes are going to be separated on center. This one's about three and three sixteenths of an inch. This one right here is going to be about two and fifteen sixteenths of an inch. It's going to be the same for that measurement there. Now, a lot of those holes on your standard A frame jacks are going to have elongated holes, so this hole separation is designed to fit your standard three inch mount pattern for A frame jacks. Again, this unit's going to feature a nice steel construction.
You also got the lip that goes around the socket right here so potentially some of those socket locks that are out there on the market to help protect your unattended trailer, some of those would fit on this unit. You just have to check out those and see if they would fit on this particular coupler. Again, it is a weld on design. This is designed to fit the industry standard fifty degree A frame trailer frames. Your ball size on this unit's going to be two and five sixteenths of an inch and the capacity of this coupler is going to be ten thousand pounds. If we take a look at the overall length, measuring from the very front to the very back, we can see there that it's going to give us a measurement that looks to be about twelve and three quarters of an inch. That's going to do it for our review of part number FE443050303.
Average Customer Rating: 4.8 out of 5 stars (33 Customer Reviews)
Parts quality at a price that no one else seem to be able to match, parts were in my hands and on the trailer in less than 4 days. Great service, great prices. etrailer.com is now in my favorites and the first place I go for parts. Thanks etrailer!
I hope it works - looks like it will.
Emily provided "Great" customer service and was able to provide a great solution.
Thanks Emily and E-Trailer!!
Alan Rowley
12,000 hard miles and working good
Great Quality
Will do the job as long as you don't use a wheel on the tongue jack. Used one and the center of the couple started bending and warping out of shape.
Sierra K.
7/22/2022
This does not sound like anything I have heard before. Can you please send me a photo and tell me what model jack and wheel you have?
i am pleased with the part that arrived and the handling of the original one being out of stock - id really like if they update their order system however, as it's very annoying to receive an email that suddenly the part is out of stock, and be hit with the fact that the only other ones are more money... bit of a bait and switch, i did however get offered a discount and they were more than helpful in making sure to find me another part that was correct and would meet my needs
Damien
12/15/2018
It’s, well it did what I needed it to do - which was be part the important part of a custom tow bar I had made to get our broken down RV from Las Vegas to Modesto behind a UHaul truck I had to pair it with you 2in to 2 14? Inch adapter that was supposed to be used with one of your weight safe hitches, it worked fine but I really haven’t needed to use it again In the last year - we don’t move the rv any more so it’s just hanging out on the front of the rv laying kind of on the ground - for what it’s worth though, there is not a hint of rust on it and every so often when I play with the latch for kicks it still works freely I keep the ball adapter stored in there and let’s go and latches back up fine, sorry I can’t say a whole heck of a lot more
I needed to upgrade the hitch coupler on a homemade car hauler and this one worked just fine for my needs.
Perfect coupler for my Hi-Lo camper. As for etrailer's delivery, it was very fast and their customer service as nd sales team are awesome!
I appreciate working with etrailer.com and the excellent customer support. Highly recommend!
good quality, fits the ball nicely, the new jack I used fit good, I did reinforce around the jack.
I received it yesterday and it will be installed tomorrow morning. Looks like it should work.
John
7/24/2022
It’s working great had it welded on and it is going strong
Great customer service... I will continue to use etrailers for my fleet..
Looks good,great price and quick delive ry.
Larry
11/11/2021
Works great, still looks great,
Looks like an exact replacement of the original. Easy to find on the web site.
very good and easy to unlock and lock
Received items ordered before time of delivery will definitely order again .All arrived in good packaging and items without damage.
Can't believe how good this was made for what it cost. I'll definitely buy again.
Good descriptions, fast shipping, and no hassle ordering. Pticed to make it worth the wait.
Shipped fast
Good product
Great product at a great price
Shipped out fast and got here in just a few days. Product seems well made and heavy duty
just what i needed and fast shipping. thank you guys very much.hope to do business with you again
Works Great
great product and great service thanks jim
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan S.
7/21/2015
Still working like new