Reese Friction Sway Control Kit Review Video

The Curt Friction Sway Control, #17200 and the Reese Friction Sway Control, #83660 are very similar. Friction sway control systems are a simple design and don't vary much in how they work. As soon as your trailer begins to move out of line,…

Yes, the Reese Sway-Control Bracket #RP26003 that you referenced will fit with a 2-5/16 inch hitch ball. The confusion may be that this is designed to fit 2 inch ball mounts. That means ball mounts designed to fit 2 inch hitches. As long as the…

Yes, we do have weight distribution system shanks that have more drop than what you have now so that your trailer can sit level. For that you could use the part #C17123 which works with your e2 system and can do a drop of up to 8 inches.

To get maximum benefits from the sway control, a series of road tests should be taken with the loaded trailer. A great starting point you will want to loosen the tension bolt till it no longer makes contact with the unit, now tighten it up right till…

All weight distribution/sway control systems make some noise since they all rely on friction to do their job. The stand-along friction sway control devices like the Reese #83660 are best disconnected before you back up a trailer or they are likely to…

If you are backing up mainly in a straight line you can leave the Reese Friction Sway Control part #83660 installed but if you end up getting into a tight enough turn you'd need to disconnect the kit.

The Reese Sway Control Kit part #83660 can be bolted to the frame of your enclosed trailer. And if you use the ball mount bracket part #RP26003 you wouldn't have to have a tab welded to your ball mount either.

You do have a couple options but the Curt Ball Mount w/ Sway Control Tab #D320 is not available in a 10K weight capacity. You can use the similar Curt Ball Mount #C45310 rated for 10,000lbs and weld on a Sway Control Tab #C45822. We do also have the…

Lithium mode on Progressive Dynamics Power Centers like the #PD4135K is a single stage charging style so the Charge Wizard isn't going to be compatible with this mode, thus making the light blinking irrelevant. They are currently working on…

For your 20 Foot Outback Enclosed Trailer, the Reese Friction Sway Control Kit - Economy #83660 will use friction to minimize the movement by basically sandwiching the moving bar. This will allow for turning to still happen without issue, but will…

Yes, you can use the Reese Friction Sway control part #83660 without a weight distribution system. You would just need to use the tab part #RP26003 on the ball mount as well.

Yes, based on the weight of the Grand Design 2023 23LD that I was able to find online the Curt weight distribution system part #C69JR would work great with it.