Will the Reese Sway-Control Bracket # RP26003 Work with 2-5/16 inch Hitch Balls

Question

Question:

Will this work with a 2 5/16inch ball?

asked by: Dave

1

Helpful Expert Reply:

Yes, the Reese Sway-Control Bracket # RP26003 that you referenced will fit with a 2-5/16 inch hitch ball. The confusion may be that this is designed to fit 2 inch ball mounts. That means ball mounts designed to fit 2 inch hitches.

As long as the diameter of the shank of the ball is 1 inch this will work fine with it. I attached a link to a page that has all of the 1 inch diameter shank 2-5/16 inch hitch balls we carry.

expert reply by: Jameson C

1

Answer 1

Yes, the Firestone Coil-Rite Air Helper Springs #F4175 will work great with your 2022 Volkswagen Atlas.

view full answer...

Answer 2

All of our friction sway control unit

view full answer...

Answer 3

Yes, you can use the Reese Sway Control Bracket #RP26003 on the MaxxTow Adjustable Ball Mount MT70067. For a sway control unit I would go with a Reese Friction Sway Control Kit #83660 as it is designed to work on the Reese Bracket #RP26003.

view full answer...

Answer 4

You can use the Reese Sway-Control Bracket #RP26003 on a ball mount in the rise position provided that when in the rise position the bracket is not free to swivel. It is not likely that you would run into this problem but you need to just be aware…

view full answer...

Answer 5

A standalone friction sway bar like the Curt #17200 that you referenced is an excellent sway control alternative for vehicles like your 2018 Audi Q5 that aren't rated for a weight distribution system. You are correct that a full weight…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Will the Reese Sway-Control Bracket # RP26003 Work with 2-5/16 inch Hitch Balls

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching