Review of Reese Weight Distribution - Friction Sway Bar - 83660 Video

For your 2024 Toyota Sienna Platinum you will need a 7-way connection along with the brake controller itself. I recommend the following: -Curt Powered Tail Light Converter #C59236 -Universal Installation Kit for Trailer Brake Controller #ETBC7…

If you are backing up mainly in a straight line you can leave the Reese Friction Sway Control part #83660 installed but if you end up getting into a tight enough turn you'd need to disconnect the kit.

To get maximum benefits from the sway control, a series of road tests should be taken with the loaded trailer. A great starting point you will want to loosen the tension bolt till it no longer makes contact with the unit, now tighten it up right…

The Reese Sway Control Kit part #83660 can be bolted to the frame of your enclosed trailer. And if you use the ball mount bracket part #RP26003 you wouldn't have to have a tab welded to your ball mount either.

Yes, we do have weight distribution system shanks that have more drop than what you have now so that your trailer can sit level. For that you could use the part #C17123 which works with your e2 system and can do a drop of up to 8 inches.

I do have an option that will allow you to use a sway control bar on the left side of a ball mount, however, the Reese Sway Control adapter plate #RP26003 is designed to be used on the right side only. To be used on the left side, this plate would…

If your 1-1/4 inch hitch is on a 2008 Chevy HHR then it is a Class I hitch. You can identify a Class I based on the tongue weight and gross trailer weight capacities. A Class I hitch will top out at 200 pounds tongue weight capacity and 2,000 pounds…

Sway control is beneficial in towing conditions such as crosswinds or a large truck passing; the system will allow you to have greater stability and control than otherwise. There is a sway control bar that could work for you, the Reese Friction Sway…

Since you do not want to run wiring the best thing you can do is install a 12 volt battery in your trailer like you mentioned, and you can connect the Rampage Wireless Backup Camera #RA7710. This would be the easiest method and what you will do is…

Towing more than one trailer does make things more interesting. What I think would help you though is a friction sway control unit installed between the fifth wheel and the boat trailer like the #83660. You also need the bracket part #RP26003…

Since you have a tandem axle trailer the easiest solution for jacking up the trailer to allow the flat to be changed is the Blaylock EZ Jack part #EZ-Jack. You would just need to roll the good tire on the side of the trailer up on this wedge and the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…