Will Curt Weight Distribution System # C69JR Work with 2023 Grand Design 23LD

Question

Question:

We have a GMC 2022 v6 with trailering package and a 7,700 towing capacity. We have placed a deposit on a grand design 2023 23LDE. Will the C69jr work for us?

asked by: Tom H

0

Expert Reply:

Yes, based on the weight of the Grand Design 2023 23LD that I was able to find online the Curt weight distribution system part # C69JR would work great with it.

expert reply by: Jameson C

0

Answer 1

Both the Curt TruTrack 2P Weight Distribution System #C69JR and Reese Pro Round Bar Weight Distribution #RE44FR are going to use a 2-5/16" Ball #C40030 with a 1-1/4" shank. You will want to use the 2" Ball #A-90 to switch to a 2"…

view full answer...

Answer 2

If you have a compatible 2-5/16" ball and shank already from your #C69JR, the replacement you need is the Curt TruTrack 2P Weight Distribution System w/ Sway Control - No Shank #C79JR. This comes with everything you need in order to mount the…

view full answer...

Answer 3

You are going to need a different system like the Fastway e2 Weight Distribution #FA92-00-0800 which is rated for a tongue weight of 400-800lbs and trailer weight up to 8,000lbs. The Curt TruTrack 2P Weight Distribution System #C69JR is only offered…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

Yes, based on the weight of the Grand Design 2023 23LD that I was able to find online the Curt weight distribution system part #C69JR would work great with it.

view full answer...

Answer 8

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 9

Thanks for the picture! The Curt TruTrack 2P Weight Distribution System w/ Sway Control item #C69JR will work with your 7,000 lbs Jayco 267BH. The Curt TruTrack has an 800 lbs to 1,000 lbs tongue weight range. The built in sway control will help to…

view full answer...

Answer 10

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 11

I went ahead and confirmed with my contact at Curt that the spring bars on the Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank #C69JR are 35" from end to end. I went ahead and attached a diagram of this measurement for…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Will Curt Weight Distribution System # C69JR Work with 2023 Grand Design 23LD

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching