Curt RockerBall Shock Absorbing Hitch Ball Mount with Sway Control Review Video

We have a way to install a 7-way on your 2021 Ford Bronco that does not have LED taillights but you'll have to first start with a 4-way like the part #C87BR and then convert it to a 7-way with the part #ETBC7 which also comes with the components…

For a spare tire and wheel on your 2023 Coleman Lantern 17B use the Karrier ST215/75R14 Radial Trailer Tire - 5 on 4-1/2 - Load Range C - Galvanized Wheel #AM32182 or White Wheel #AM32181.

The Reese Sway Control Kit part #83660 can be bolted to the frame of your enclosed trailer. And if you use the ball mount bracket part #RP26003 you wouldn't have to have a tab welded to your ball mount either.

Yes, the Reese Sway-Control Bracket #RP26003 that you referenced will fit with a 2-5/16 inch hitch ball. The confusion may be that this is designed to fit 2 inch ball mounts. That means ball mounts designed to fit 2 inch hitches. As long as the…

There is not a way to attach a sway bar tab to that ball mount, or a way to use a bike rack and weight distribution with an adapter. If your 2023 Kia Telluride has a roof rack you can use a roof-mounted rack like the Yakima FrontLoader #Y02103.…

You can absolutely install a trailer brake controller on your 2018 Subaru Outback. Starting with the brake controller itself, I highly recommend the Tekonsha Prodigy P3 #90195. This is an excellent, proportional controller that will activate the…

Yes, for your 2015 Riverside Whitewater Retro 155 I recommend using the Curt Adjustable Trailer Hitch Receiver part #C13701. This hitch will be an excellent option for you so long as your frame rails are spaced between 18"-51" apart which…

If you have the clearance to go with larger wheels/tires that would be one way to raise the suspension. Or if your axles are above your leaf springs you can move to being below the springs and you can gain ground clearance that way as well. This is…

The ball of the Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab #C45WR is not installed or torqued down when it arrives. You'll need to torque the nut to 250 ft lbs.

Yes, you can install the ball of the Curt RockerBall 2-5/16" Shock Absorbing Hitch Ball and Ball Mount w/ Sway Control Tab #C45WR in the rise position if you wanted which would give you the rise of 3/4 inch that you mentioned.

I went ahead and confirmed with my contact at Curt that the spring bars on the Curt TruTrack 2P Weight Distribution System w/ Sway Control - 7-Hole Shank #C69JR are 35" from end to end. I went ahead and attached a diagram of this measurement for…

We have exactly what you are looking for. The Sway Control 2-Ball Platform for BulletProof Hitches Ball Mount #358SWAYCONTROLBALL you were looking at is designed specifically for the BulletProof Hitches Ball Mounts. These ball mounts are not…