Yates Rubber Boat Trailer Parts - Bow Guard - YR6Y33-4 Review Video

The Dutton-Lainson Roller Bunk Bracket, part #DL21742, fits Dutton-Lainson Roller Bunks #DL21740 and DL21741. Four are needed to mount a pair of roller bunks. My contact at Dutton-Lainson advises that u-bolts are not specifically required to install…

You can use roller bunks like the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers #DL21741 instead of carpeted bunks on your 2012 Deep V Tracker boat without any marks or indentations. The roller bunks…

The Boat Trailer Roller Bunk Brackets #DL21742 do require 7/16" U-bolts such as #7163183UB. The bunk brackets are designed to be used with Roller Bunks #DL21740 or #DL21741.

I went out to the warehouse and pulled a roller bunk bracket #DL21742 to measure the slotted hole spacing for you. The slotted holes are 1-1/4 inches apart on center. I also made a short video showing this measurement for you.

When it comes to installing custom towing mirrors on your 2023 Chevrolet Tahoe I recommend The K-Source Snap & Zap Custom Towing Mirrors #KS49NQ. I recommend these mirrors over the universal fit mirrors because the custom mirrors will have a…

The base for Yates bow stop #YR6Y33-4 measures 3 inches by 2-7/8 inches. I have included a picture showing the measurements for you. Bow stop #YR4Y22-3 has a base that is 2 inches by 2 inches and a 4 inch span. That might work for you since the…

We don't have a replacement that is an exact fit for your measurements. We do have the Boat Trailer Rubber Y-Stop, 3" x 3 " by Dutton-Lainson #DL21732, the Yates Y-Style Bow Stop for Boat Trailers #YR333Y, and the Yates Y-Style Bow Stop…

Normally, bow guards like the Yates Y-style Bow Guard, part #YR4Y22-3, are mounted to plates that are welded to the winch post. A through bolt attaches the bow guard once it is inserted between the two plates. I have added a couple of photos of boat…

The Yates Y-Style Bow Stop #YR333Y that you referenced features a 6-1/2 inch span. The closest Y-Style bow stop we have available to your current unit is the Yates #YR4Y22-3 which features a 4 inch width between the "Y" contours. It has a 2…

The typical springs for the AL-KO 4,400 axles are one of two lengths. If you have the 25-1/4 inch length, then you will want the 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles #e28SR, but if you have the 26 inch springs, you will want the 6-Leaf…

The 4-Leaf Double-Eye Spring part #e27SR measures 26" eye to eye unloaded so this would be an excellent replacement option. They will work great on a 3,500 lb axle offering a bit more support than the original equipment. The 1/4" difference…

Your leaf springs will expand under weight and then also use shackle straps before the equalizer. Over time the leaf springs do stretch a little, so I recommend the 4-Leaf Double-Eye Spring for 2,000-lb Trailer Axles - 26" Long #e77SR as a…