etrailer Surge Brake Coupler Lock Review Video

I spoke with CE Smith about the CE Smith Support Bracket for Tandem Axle Fenders part #CE26238 and they said the flat potion is 13.88", the angled ends are 2", and the entire bracket is 17.03" long. I have created a diagram for you…

I have another option for you, but we do not offer a J bolt spare tire carrier for a trailer at this time. Instead I recommend taking a look at the CE Smith Spare Tire Carrier - Locking - Steel - 4-Lug and 5-Lug Wheels - 8-3/4" #CE27202 which…

If the front part of your square-bodied coupler is approximately 3 inches tall, based on the inner dimensions of the lock the Blaylock EZ Lock Trailer Coupler Lock #BLTL-33 will work well for you. The #BLTL-33 has inner dimensions of 3-1/8 inches x…

For the Demco A-Frame Coupler #12660-97SP that you referenced the etrailer locking hitch pin part #e98888 would fit and work great. This has a usable span of 3-3/8 inches.

I may have another option for you, but the EZ Lock Trailer Coupler Lock #BLTL-20 you were looking at is only confirmed to fit the Bulldog Collar-Lok Couplers so it will likely not work on your surge brake actuator. I looked up your Continental Model…

Yes the coupler part #DM13689-52 that you referenced is lockable. For a pin style lock the part #28012 would work well. Or for a lock that goes around the coupler opening the part #BLTL-20-40D would be a great option. I attached review videos for…

The Demco Channel Tongue Trailer Coupler - eZ-Latch #DM15945 is designed for a 3"x3" tube.

The overall length of the Demco Channel Tongue Trailer Coupler #DM15945 is 11.042".

Many couplers like the #DM15945 do not come with a safety pin. This likely cuts cost out of the product and allows you to use an existing safety pin if you have one, choose your own, or add a lock instead. This particular coupler has a 5/16"…

I'd recommend a universal coupler lock set like the #FA86-0015-316 from Fastway. The coupler lock is compatible with 1-7/8, 2 or 2-5/16 inch couplers. I'd also go with a latch lock like #e98887 to prevent the coupler from coming unlatched…

The latch of the Demco Channel Tongue Trailer Coupler #DM15945 that you referenced is pre-adjusted to fit a 2 inch ball as-is and would not require you to do any initial adjustments for it to work properly.

Yes, I do have the exact dimensions you need of the Demco Channel Tongue Trailer Coupler part #DM15945. I have attached these for you below.