Dutton-Lainson Trailer Coupler Grip Handle Review Video

The CE Smith Boat Trailer part #CE48810 would be a great option for your Sportsman AutoPilot 120 as it's 12 feet long like what this trailer was designed to fit and this has adjustable angle and width bunks to best match the hull of your…

The frame width between the fenders on the CE Smith Multi Sport Plus Boat and Kayak Trailer #CE48870 is right at 40". As you mentioned in your question, the fenders each add a width of 7" to put the overall width of the trailer at…

The overall width of the CE Smith Multi Sport Plus Boat Trailer with Bunks #CE48870 is 54 inches wide.

I checked with Aluma and they list a 14" Liger Wheel and Tire 60-0001396 as a replacement 14" wheel for their trailers but they do not specify the finish. We do have one 14" Liger Wheel item #LH84FR. It is gunmetal gray and…

No; the Demco Hydraulic Trailer Brake Actuator #DM72VR is designed for use with free-backing brake systems and does not have a lockout feature- so you wouldn't be able to use the Manual Reverse Lockout Kit #DM5939 with that actuator. To use…

I spoke with my contact at Swagman and she informed me that the Swagman Exo Aero #S65145 measures 28 in total width and sits 5-1/2 inches tall from above the mounting hardware.

The bearing that you have on the trailer hub measures just under 1 inch (0.985) and we are not going to have a hub that accepts a bearing with an inner diameter of that size. This is common for the trailer kits like the Haul Master branded…

The #168233 Double Lip Grease Seal has an outside diameter of 2.332 inches and an inside diameter of 1.688 inches. This seal is not compatible with a AF2527E seal with a O.D 2.312, because, even though the O.D. id very close, the inner diameter of…

The bolt pattern of a wheel is defined by two numbers: the number of bolt holes and the diameter of the circle (in inches) that they form, measured through the centers of the bolt holes. For example, a 5 on 5-1/2 bolt pattern defines a wheel that…

It sounds like the zerk fitting on your spindle has failed as it is not supposed to go into the spindle. You will want to remove the zerk fitting somehow because it could interfere with the possible solution of using bearing protectors,…

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

The BTR and BT8 denotations refer to the spindle, not the trailer hub. The difference between a BTR and BT8 spindle is that the BTR spindle uses a 1.063" diameter L44649 bearing and the BT8 spindle uses a 0.99" diameter L44643 bearing. In…