Draw-Tite Hitch Ball - Trailer Hitch Ball - 63840 Review Video

I went out to our warehouse and measured the Draw-Tite and Reese Replacement Weight Distribution Trunnion Style Head, part #RP58167. The distance from the top, flat portion of the head to the vertical mounting holes is 3/4-inch. From bolt hole to…

For the Demco A-Frame Coupler #12660-97SP that you referenced the etrailer locking hitch pin part #e98888 would fit and work great. This has a usable span of 3-3/8 inches.

The back of the Demco A-Frame Trailer Coupler item #12660-97SP is 10-3/8" wide. I have linked a diagram below I made along with a review video.

The Master Lock Hitch Receiver and Coupler Latch Lock Set - Padlock - 1-1/4" and 2" Hitches #2848DAT has replacement keys if you know the key number using #MLK1. If you do not know your key number, unfortunately there is no way to determine…

The ball that is included with the Hide-A-Goose Underbed Gooseneck Trailer Hitch, part #9465-36, is a 2-5/16 inch diameter ball. If you need a 2-5/16 inch replacement we have 3 to choose from. First, we offer part #19309. We also carry part #19306,…

The recommended ball for the Fastway E2 Weight Distribution Hitch #FA92-00-0800 that you have is 1-1/4 inch in diameter and with a length of 2-5/8 inches. For a 2-5/16 inch ball with those dimensions I would recommend the #C40030.

Your Trunnion Fastway e2 Weight Distribution #FA92-00-0600 is capable of using 6,000lb to 12,000lb bars. 6,000lb Replacement Trunnion Spring Bars #FA92-01-0699, 250-600lbs of tongue weight 8,000lb Replacement Trunnion Spring Bars #FA92-01-0899,…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

I went to our warehouse and checked the Replacement Head #FA94-02-1055 for Fastway e2 Weight Distribution Systems and found that it takes a hitch ball with a 1-1/4-inch diameter shank. You can use the link provided to view all 2-5/16-inch hitch balls…

The Equal-i-zer Weight Dist Shank part #EQ90-02-4900 will work just fine with a Fastway e2 Weight Distribution System and it has a 2-1/2" shank so as long as the drop of 6" is enough this will be the perfect option.

In most cases Loctite is not required when installing a trailer hitch, but it would not be a bad idea. I suggest using the Loctite Blue Stick Threadlocker, #LT37643, which will provide a secure grip and protect against water and grime.

Since the Replacement Bolt Kit #FA92-02-9600 has lock nuts with it you most certainly can use split ring washers with the flat washers. My contact at Fastway confirmed this. If you are having troubles with the conical washers coming loose you may…