etrailer.com Trailer Coupler Lock Review Video

I checked with Aluma and they list a 14" Liger Wheel and Tire 60-0001396 as a replacement 14" wheel for their trailers but they do not specify the finish. We do have one 14" Liger Wheel item #LH84FR. It is gunmetal gray and…

I'm assuming that you're wondering how much the leaf springs flatten out over time. Usually it won't vary by more than 1/2 inch or so, but there's a sure way to get an accurate measurement. The best way to get an…

The two swivel trailer jacks are very similar. The differences are the #MJ-1206B is rated for 1,000 pounds and has 10 inches of travel where the #MJ-1200B is a slight upgrade rated at 1,200 pounds and 11 inches of travel. I've linked videos to…

The Pro Series #PS1401420303 would not be the best option for use as stabilizers for your Mercedes Sprinter. I recommend something like #UF48-979004 which is a set of 4 stabilizers rated for 6,000 pounds each. As long as you have 11 inches or more…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

Functionally speaking, there isn't a huge difference. The Curt #C56382 has a slightly lower capacity at 3 amps for circuit for stop/turn signals and 6 amps for taillights. The Tekonsha #118781 has a capacity of 5 amps per stop/turn circuit and…

Yes, the CE Smith Padlock Brackets #CE26002Z-2 do have the 1/2-20 thread size.

For a trailer tire, the narrowest option rim for any given tire is going to be the best option. For a 205/75-15, the best option would be a 5 inch rim. The reason that narrower is better is because it provides more support for the tire. Since trailer…

We have a really great solution for a lock for the latch of the Demco Coupler part #DM12925 that you referenced with the Bulldog Lifelong Trailer Coupler Lock #BD580403 that fits tight to the coupler trigger making it very hard to get into. The span…

We have the MasterLock Trigger Style Coupler Lock part #605DAT which has a span of 3/4 inches like you said you need that would work well. You are correct and the tighter the latch opening is to the trigger latch of the coupler the harder it would be…

Your current taillights are grounding through the mounting hardware which is why there's on two wires and the LED Clearance light part #STL79RB instead grounds with the included white wire. So what you'd need to do is run the white wire to…

The lamp you referred to, part #STL80RB is intended for use as a third brake lamp, but it could be used as a single function lamp only. It is not meant to operate as a multiple function lamp. This would explain why the lamp is not doing what you are…