Curt Forged Ball Mount Review Video

Based on how tight of clearance there is between the MultiPro tailgate and the rear hitch of the new Chevy trucks fixed ball mounts won't have the needed clearance. Instead you would need to go with a B and W Tow and Stow designed for this…

Yes, the Timbken bearings part #TMK73VR and #TMK23VR are made in the USA.

The B&W ball mount #BWBMHD30012 requires a ball with a 1-1/4 inch diameter shank. Ball #BWTS10051 does indeed have a 1-1/4 inch shank so it can be inserted in the ball mount. However it was designed as a replacement for a pintle/ball combo…

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only…

Part AD2528E is a double-lip grease seal from NOK that cross-references to National seal part 470460. My research shows this seal has an inner diameter of 1.688-inches and an outer diameter of 2.560-inches. The nearest item we have is part #168255TB…

The BandW Heavy-Duty Ball Mount - 1 Rise, 2 - 8-1/2 Long - 16,000 lbs #BWBMHD30010 is very similar tot he Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 1" Rise, 2" Drop - 15,000 lbs #C45331 which has the same hitch ball shank…

No. While Curt is an American company and manufactures a great deal of their products in the U.S.A., the Heavy Duty Forged Ball Mounts like the #C45340 is not one of those products. If you're looking for a ball mount that is made in the U.S.A.,…

Torque specs for wheel lug nuts vary depending on several factors like stud size, wheel size and wheel material. The linked image provides a listing of commonly recommended torque values. The studs on your hubs #A35RS545E are 1/2-inch diameter and…

The best location to install a camera on the back of the trailer is in place of the center marker light at the top. That said, removing the center light completely can be a violation of local state law. The best option we have with this in mind is…

I would be happy to help you. We hear this complaint quite often about dealerships not wanting to install after market wiring for random reasons because they want you to purchase theirs usually. The Curt Shock Absorbing Towing Kit w/ Sway Control and…

The Gen-Y Stabilizer Bar Kit for Gen-Y Adjustable Ball Mounts #325-GH-0100 give you a bar length adjustment range of 24- to 33-inches which works for most installations. The bar ends have to be affixed to the vehicle's frame for them to properly…