Dimensions of the Curt Hitch part # C15800

Question

Question:

I want to know what the dimensions are of the hitch. I.e. length of steel on frame, distance between mounting holes. I have an International 4700LP with Air Ride that has a 34inch frame spacing and a short amount of frame behind the air ride suspenion and Im trying to find a hitch that will fit it.

asked by: Doug

1

Helpful Expert Reply:

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part # C15800 that you referenced. See attached pic.

I also attached a set of the installation instructions for this hitch.

expert reply by: Jameson C

1

click to enlarge

Answer 1

Thanks for your patience. It took a few days to get the measurements for the Curt Trailer Hitch item #C96CR. I have linked a diagram I made below. The Curt item #C96CR is a class V hitch with a 2-1/2" receiver. It has a 20,000 lbs towing…

view full answer...

Answer 2

I went to our warehouse and took a couple of measurements of the part #C15800. I have attached a photo of the trailer hitch and it has the dimensions noted. It measures 7 inches from the mounting lip to the top of the receiver opening and 9-1/2…

view full answer...

Answer 3

The 2017 GMC Sierra 3500 cab-and-chassis is a confirmed fit for the Draw-Tite Ultra Frame Trailer Hitch #41947 so long as the truck frame width dimension is 34-inches from outside edge to outside edge. This frame dimension requirement applies to…

view full answer...

Answer 4

Yes, we do. I have attached them below. This hitch is confirmed to fit the 1985 Chevrolet C/K Series Pickup with the 6' or 8' beds with a standard or step bumper and the cab and chassis models.

view full answer...

Answer 5

Please refer to the included images I made showing measurements for Curt trailer hitch #C14048. This hitch is designed to fit 1999 to 2016 Ford cab and chassis model trucks. Those are the trucks sold without a bed and are then turned into service…

view full answer...

Answer 6

I went out into our warehouse to measure the mounting flange of the Curt Hitch part #14053 that you referenced and found it to be 15-1/8 inches long.

view full answer...

Answer 7

The mounting holes the Curt Trailer Hitch Receiver #14053 measure 38-1/4" (for the 4 rearmost) and 38-3/4" (for the 1 forward-most) and then from the edge of the receiver that measurement is either 4-1/2" or…

view full answer...

Answer 8

I believe the 2022 Ford F-450 Super Duty has 19.5" wheels, verify this for your vehicle. I suggest the Wheel Masters 4-Hose Inflation Kit, #WM8001 which is for wheels up to 19.5".

view full answer...

Answer 9

I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V #C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit select…

view full answer...

Answer 10

I can tell you how far the Curt #C15400 extends out from the frame and you can use that to determine the measurement to the end of the service body. We don't have information on the RKI S6080 or a way to determine that distance otherwise. The…

view full answer...

Answer 11

The Curt Trailer Hitch Receiver #C15809 that you referenced will work on your 2012 Dodge Ram 2500 Mega Cab. Cab and chassis model trucks come from the factory without truck beds on them at all. Typically trucks are bought like this so a flat-bed or…

view full answer...

Answer 12

The mounting flanges of the Curt hitch part #C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.

view full answer...

Dimensions of the Curt Hitch part # C15800

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching