Curt Channel-Mount Couple Review Video

Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…

Yes the two parts are absolutely compatible. The Sleeve-Lock Trailer Coupler - Adjustable Channel Mount #CTA-296 is compatible and will mount to the Ram 5-Position Adjustable Channel Bracket for Couplers #CTA-CB6. I have added links to video reviews…

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed for 3…

The Demco 50-Degree A-Frame Coupler without Jack Hole part #DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.

Most A-Frame Trailer Couplers have a standard of 50 degrees. I produced a short video for you showing the angle of the etrailer A-Frame Coupler, part #CA5400. I have also linked an FAQ on trailer couplers.

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

When mounting a cast head coupler like Bulldog #BDA256C0317 to its mounting channel you will want to torque the mounting bolts to the specification indicated by the manufacturer in the instructions. The torque spec will vary from coupler to coupler.…

You can upgrade to larger tires but you will need larger wheels and also ensure you have the right amount of clearance. With trailer tires, the general rule of thumb is you want at least 3" of clearance from the top of the tire to your fender…

The Erickson E-Track Trailer Cargo Control tracks, #E19146, are intended to mount to the structural components of a trailer. These locations provide the most secure mounting to ensure your cargo remains stable within your trailer during transport.…

We definitely have options to upgrade your current wheels. You will want to make sure you have at least 3 inches of clearance from the top of the tire to the bottom of the fender, but if you have the ability to modify the fender, this should not be…

You actually should shoot for 4-1/2" of clearance between the top of your tire and the bottom of the fender well. This accounts for flex in your suspension. Unless 2,280 lbs is the GVWR (gross vehicle weight rating) of your trailer then you need…

For a 5 on 4-1/2 inch bolt pattern hub that's compatible with a spindle that uses the #L44643 as both the inner and outer bearing, I'd recommend the #AKIHUB-545-2-LF-1K from Axle Tech. The hub is compatible with 13-15 inch rims, so it'll…