Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-384-00 Review Video

Yes, if you wanted to drill a different hole in your trailer suspension rear hangers you could and this would allow the spring to be held at a different height. Just make sure it's not too close to the current hole.

The correct Dexter Trailer Springs Over-Under Conversion Kit for a Big Tex 35ES Single Axle Utility Trailer with Dexter 3,500 Lb Trailer Axle is part #K71-384-00.

What you need is the Correct Track tandem lift kit part #RR23QX which will give your current suspension setup a lift of up to 2-1/4 inches. Aside from that there isn't a way to gain additional height from the trailer.

There are a couple different ways to raise the ride height of your trailer, but before we choose the best option for you, we will want to take a look at a few things. First, it sounds like you are not towing with your trailer level so you do not hit…

The correct over/under conversion kit for your 2022 Salem Cruise Lite 240BHXL will depend on if it has 2-3/8" or 3" round axles. It is highly likely you have 2-3/8" axles, which are 3,500 lb axles, but you will need to verify. I'll…

The easiest way to determine the correct replacement parts for your trailer's suspension is by simply measuring its existing components. Looking at one of your current equalizers, you will want to measure from the center of the front hole to the…

To move the leaf springs on your Wildwood X-Lite 263BHXL to the top of the axle I recommend the Dexter Over-Under Conversion Kit #K71-384-00. This particular kit is designed for 2-3/8 inch round axles which is the standard size for 3,500 axles like…

The Trailer Valet part #STC-V211 that you referenced can be installed on either the left or right hand side of a trailer. I attached a picture of it mounted to the left side of a trailer for you to check out as well.

I do have an option for you but the Dexter Trailer Springs Over-Under Conversion Kit part #K71-384-00 is for axles with a 2-3/8" diameter as they measure about 2-3/8" inside to inside so it likely will not work with a 2,000 lb axle which…

Your question came in totally blank, all I got were a couple pictures of a drop spindle axle on top of a leaf spring with the U-bolts removed. If you are having difficulty separating the leaf spring from the axle you might try some penetrating lube…

I do apologize for your cover not staying closed! There are a couple things that you can do to troubleshoot the latch of the Pace Edwards UltraGroove #311-KRDA24A55. Firstly, make sure that the pull strap needs to be used to close it instead of…

You do have a very interesting situation. When it comes to aluminum trailers we always defer to the manufacturer whether it is just a utility trailer or an RV trailer like your toy hauler. Aluminum frames can't always withstand the pressure of a…