Is Ram Channel Bracket Compatible With Sleeve-Lock Trailer Coupler

Question

Question:

Are CTA-CB6 bracket used with CTA-296 Coupler?

asked by: Bob K

0

Expert Reply:

Yes the two parts are absolutely compatible. The Sleeve-Lock Trailer Coupler - Adjustable Channel Mount # CTA-296 is compatible and will mount to the Ram 5-Position Adjustable Channel Bracket for Couplers # CTA-CB6.

I have added links to video reviews of both the coupler and the channel for you to take a look at.

expert reply by: Kyle S

0

Answer 1

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 2

The only sort of grease cap we offer for a threaded 1.98" hub bore is the Bearing Buddy Bearing Protectors part #BB1980T-SS which contains fine threads. This is the only option we'd have save for new hubs as most standard grease caps just…

view full answer...

Answer 3

Trailer magnets are designed set up for each brake assembly size axle capacity. If you check out the link I attached you will see all of the magnets we carry. From there you will need to click the brand you have, the size assembly you have, and then…

view full answer...

Answer 4

I reached out to Timbren and they do not recommend using the Timbren Axle-Less Trailer Suspension System #TASR7KS01 for triple axle applications because of weight balancing. Although ideally it would work if the load was perfectly balanced, there are…

view full answer...

Answer 5

You would not need to disassemble the Demco Hydraulic Brake Actuator w Electric Lockout #DM8104002 before welding it on. It's ready to go as-is.

view full answer...

Answer 6

The Demco 50-Degree A-Frame Coupler without Jack Hole part #DM15349-52 is not available with a jack hole. If you want to add your own hole to accommodate a jack that would be acceptable.

view full answer...

Answer 7

I do have an option for you but I don't recommend stacking frame sections so you can bolt-on a new brake actuator. That said, it looks like you have an a-frame actuator and we have several options to replace this. The Demco Hydraulic Brake…

view full answer...