Review of Shocker Hitch Hitch Fabrication Parts - Trailer Tongue Vertical Channel Weld On - SHK95RR Video

Are you looking at the Blue Ox SwayPro weight distribution shanks, like part #BXW4002? If so, Blue Ox does not give these shanks a specific class rating. All of their shanks fit 2 inch trailer hitches and have a maximum towing capacity of 15,000…

From your description it sounds like you are talking about the weldment that comes with the Buyers Products Adjustable Tri-Ball Hitch - Solid Shank #3371802225 (see attached picture) which is part #3373001727 and the Buyers Products Tri-Ball Hitch…

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer…

Since your trailer weighs around 2000lbs and can tow up to 7000lbs I recommend using two of the 30" Long Safety Chain with 7/16" S-Hook with Latch - 5,000 lbs - Qty 1 #TCTSCG30-730-04x1 which have a combined weight rating of…

I spoke to Demco, and unfortunately the Coupler #DM15349-52 cannot be mounted to the bottom of a frame. They went on to say that there would not be enough surface area for it to handle the weight when welded or bolted on. That being said, the Ram…

I only see that Dexter/Titan offer an electric lockout #T4853220 or no lockout #T4848600 on their surge brake actuators. Since you have electric drum brakes on his axles those will need to be changed out for hydraulic. You should consider then…

The Replacement Inner Slide for Demco DA91 Actuators #DM12808-97 replaces the inner slide for your Demco DA91 brake actuator and would allow you to use the Demco Trailer Coupler #DM14976-52 for a 2" coupler or the Demco Trailer Coupler…

The Demco Trailer Coupler #DM12688-95 does install to a channel bracket using bolts like what we find in the Kit #DM6166. If you were looking for a bolt-on channel bracket then the part #DM13867-52 would be what you're looking for which…

Adjustable trailer couplers are not going to mount to your truck; they will attach to the frame of your trailer. Some of the adjustable couplers, such as the Bulldog Cast Head #BDA2563C0317 come with the mounting hardware to weld onto the frame of…

We have a folding trailer tongue hinge that could work for the purpose you describe, as long as your trailer frame isn't constructed of aluminum. You could use the Fulton Fold Away Coupler Hinge, part #FHDPW330300. The hinge kit is designed…