Ark Removable Xtreme Off-Road Swing-Up Trailer Jack Review Video

I got my hands on the Removable Xtreme Off-Road Swing-Up Trailer Jack #ARK47FR and was able to determine that it can accept a 2" outer diameter tube inside the mounting tube and has a 5/8" diameter retention pin. If you remove the current…

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

Yes you are correct. The outer diameter of the Removable Xtreme Off-Road Swing-Up Trailer Jack #ARK57FR is 2 1/2" and the inner diameter is 2.

The Removable Extreme Off-Road Swing-Up Trailer Jack - Dual Wheel - Sidewind - 10" Lift - 1,650 lbs item #ARK57FR you were looking at is the ORJW750T model of Ark jacks. The jacks mounting tube has a 2" inner diameter and a 2-1/2"…

The best way to jack up a boat trailer with torsion axles, or straight axles for that matter, is to use a trailer jack that is rated high enough for the weight of the trailer at the point the jack is installed. Going with a higher capacity than…

The diameter of the pull pin that holds the #ARK47FR jack in place on the mounting bracket is .5512".

For your Sure Trac ST9614 HLODOD-B-140 trailer I recommend adding the Ultra-Fab Ultra Scissor Jacks - 24" Lift - 6,500 lbs - Qty 2 #UF48-979002. I believe these will work well to stabilize your trailer for loading. They can be adjusted using the…

I would be happy to help you with those measurements for the Ark Removable Extreme Off-Road Swing-Up Trailer Jack item #ARK57FR. It is a standard fitting so unless your trailer has something custom added to it, it should fit. The Ark jack will fit a…

From the information you provided, it sounds like the Removable Extreme Off-Road Swing-Up Trailer Jack #ARK57FR is going to best suit your needs. This jack has a 1,650 lb. weight capacity which is the highest we have for a manual side mount jack and…

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

In order to install the Stallion Stabilizer Jacks part #288-01892-2 on an aluminium frame trailer you will want to use stainless steel fasteners which can be obtained from a local hardware store though they will more less cost effective than standard…

I attached a picture that details how to disassemble the Bulldog 12,000 lb jacks.