Equal-i-zer Weight Distribution Shank Review - 2013 Ford F-250 Video

We have a shank you can use with your Blue Ox 2-Point Weight Distribution Hitch #BLU82XR (which is your BXW0873), but the TrackPro shanks like you asked about are a bit wider than standard. So what you can use is a more standard shank from…

Thanks for the picture! The Equal-i-zer 2-1/2" Weight Distribution Shank item #EQ90-02-4800 that you referenced has 3/4" holes that are spaced 1-1/4" apart. If the head of your EAZ-Lift system has the same spacing then this shank would…

Yes, you can swap out a 2" weight distribution shank for a 2-1/2" weight distribution shank. This will actually be the preferred method instead of using a sleeve adapter as there will be much less movement inside the receiver tube. I…

For your Grand Design Reflection 315 RLTS the Equal-i-zer kit part #EQ64FR is going to be the best option as it has the tongue weight range of 1,200-1,600 lbs which will be ideal for most likely where your tongue weight will be when your trailer is…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

The bolts that hold the head to the shank for the Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0600 are 3/4-10 x 5” Grade 5 Bolts. If you're asking about the size of the hitch pin then that would be 5/8". We do have the…

Yes, the Equalizer 2-1/2 inch weight distribution shank part #EQ90-02-4800 will work as a replacement for the 2 inch shank you had with your Fastway e2 kit.

It sounds like you're using a weight distribution system and in which case the best option and what many others do as well is ditch the 2 to 2-1/2" adapter in favor of a 2-1/2" shank which will be less parts and far more secure/durable.…

Blue Ox does not offer the SwayPro part #BXW1000 with a 2-1/2 inch shank or without a shank so to use this setup with a 2-1/2 inch hitch you'd have to also order the shank 2.5 inch shank #BXW4028 with the #BXW1000.

It sure does! The only section of the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop #EQ90-02-4800 that is 2-1/2" is the portion that goes inside of the 2-1/2" receiver on your 2018 Ford F-250. The section…

The total trailer weight capacity of the Equal-i-zer weight distribution shank part #EQ90-02-4800 is 16,000 lbs. I attached a picture that shows this capacity stamped in the side of the shank.