Review of Equal-i-zer Weight Distribution Parts - Shank for 2-1/2 Inch Hitch - EQ90-02-4700 Video

Most WD shanks that fit a 2-1/2" receiver taper down to the normal 2" receiver size, just like the Equal-i-zer Shank #EQ90-02-4700. The only thing that you need to be sure of is that the mounting holes are in the same space. I have linked a…

Hey Bernard, the hitch ball that comes with the Equal-i-zer #EQ37140ET does not come pre-installed onto the head of the system.

Blue Ox does not offer the SwayPro part #BXW1000 with a 2-1/2 inch shank or without a shank so to use this setup with a 2-1/2 inch hitch you'd have to also order the shank 2.5 inch shank #BXW4028 with the #BXW1000.

There are three Equal-i-zer shanks that will fit 2-1/2" hitches. None are any longer than the others, with each being 12" and having a tongue weight capacity between 600 and 1,600 lbs; the only differences between the shanks are the rise…

Generally speaking the use of a reducer sleeve does not decrease the capacity of a trailer hitch. However some hitch manufacturers may have a reduced capacity if a sleeve is used. There isn't a standard for all hitches and all reducer sleeves. It…

Yes, the Equalizer Shank part #EQ90-02-4700 that you referenced can be used with other brand weight distribution heads. Basically all of the WD system manufacturers decided to use the same dimensions for their heads and shanks so all of the shanks…

The SportRack Cargo Carrier for 2" Hitches #SR9851 has a shipping weight of 67-lbs. This figure includes the packaging so the actual net weight of the cargo carrier itself is approximately 63-lbs. The 2-inch Class III hitch receivers we offer…

The procedure for lubricating the hitch head is pretty simple. Place a pea-sized dollop of multi-purpose or bearing grease on the underside of the ball platform right next to the sockets. You'll also want to do the same thing on the under side of…

The max trailer weight that the Curt head part #C17075 can tow is 14,000 lbs and the max tongue weight is 1,400 lbs.

There is only one size shank for the Shocker Air Equalizer for Weight Distribution Hitch, part #SHK68VR or part #SHK88VR. That said, we do have options for ones longer though you will need to forgo any cushioning and for this I recommend the…

Sounds like you are looking for the Curt Weight Distribution Shank part #C17122. This shank is 14 inches from the hitch pin hole to the vertical adjustment holes that the head of the system will install to. This will also work with your E2 Fastway…

The short answer to this question is- No. The B&W Hitch Receiver Reducer Sleeve #BWRHXA2182 does not reduce the tongue weight or towing capacity of your hitch in the same manner that a hitch adapter like the #HTAD would. You will still be able to…