Review of Equal-i-zer Weight Distribution Hitch - EQ90-02-4800 Video

It truly depends on the tongue weight rating of the weight distribution hitch that you have to know for sure. However, given large difference in gross towing weight capacities, the 10k weight distribution hitch most likely has a tongue weight range…

Thanks for the picture! The Equal-i-zer 2-1/2" Weight Distribution Shank item #EQ90-02-4800 that you referenced has 3/4" holes that are spaced 1-1/4" apart. If the head of your EAZ-Lift system has the same spacing then this…

Between using a reducer sleeve and upgrading your weight distribution shank, I recommend going with a weight distribution shank designed to fit the 2-1/2 inch hitch receiver on your 2015 Ram 2500HD. Using a 2/1/2 inch shank, like #EQ90-02-4800, for…

To determine exactly how much drop you would need out of a shank check out the FAQ article I attached that details exactly how this is determined. The current shank you have will give you at most a 2 inch drop. For an additional 4-1/2 inches of drop…

You have a very old system there! You would not be able to add dual-cam sway control #RP26002 to this system. Dual-cam systems require the bars with the cam hook ends and will not work with tapered straight bars. The system would not be a #PS49582…

We aren't manufacturers of those parts, and we don't have the testing ability in house, so I reached out to a couple of our manufacturers to see what information they could provide to try and help. I reached out to my contact at Curt…

The instructions for the Blue Ox Track Pro #BLU47FR are available on the product page towards the bottom, but I've also linked them to this answer for you, as well as a review video that you might find helpful.

The reducer sleeve does need to be a bit smaller than the interior dimension of the receiver or it could become stuck. Typically a bit of 'slop' between the shank and the receiver or in this case, the reducer and shank isn't much of a…

On Equal-I-zer weight distribution shank #EQ90-02-4700 it measures approximately 3-1/2 inches from the center of the hitch pin hole to the support gusset. If you measure from the center of your hitch pin hole out to the face of the receiver you can…

The Equal-I-Zer shank part #EQ90-02-4500 that you referenced fits a 2 inch hitch. For a similar shank that fits the 2-1/2 inch hitch you'd want the part #EQ90-02-4700. This has same 3 inch drop.

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

Basically the weight capacity for the #EQ90-02-4800 is 1,600 lbs. A lot of weight distribution systems are rated for tongue weight ranges. In this case there is really only a max capacity that it can be used with. Since this is a 2-1/2 inch hitch…